PaulTurner911 Code

Share you PDE file with our community
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

I found my temp probe was out of the water in the sump, but it still should have activated anytime under 75, which it didnt.

This also "fixed" the calibration "issues" between the RA and the chiller, since the probe was in and out of the water level. Dumb mistake, but still doesnt justify it not turning on under 75. Thank you Lee

Could it have something to do with the temp probe assignments? In my code it pulls overheat from temp probe 1. You would think thats the trigger, but Im reaching for anything to make it jive in my eyes within the code...
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

Oh the standard heater only works with the T1 probe. If you cant switch them i'll write you a function
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

T1 IS the probe in the sump, T2 is in the stand basically ambient temp.... I can switch them, but why?
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

Nevermind was hoping that was it. Roberto can you check the code. I need some more eyes on it.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PaulTurner911 Code

Post by rimai »

It should be this:

Code: Select all

ReefAngel.StandardHeater(Port2,750,760);
instead of this:

Code: Select all

ReefAngel.StandardHeater(Port2,75,76);
Roberto.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

You rock!!
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

I'm so slow...
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Lee!! You've walked me through EVERYTHING! You're the man!!
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

Roberto,

Do you think if we convert the function that if the values are less than 100 we multiply by 10 automatically? I don't think anyone is going to want 2.4 degrees to 2.6 degrees celsius in any aquarium, nor do we want 7.5 -7.8, etc.

Also, I think we could add a StandardHeater2 or a StandardHeater function with an arg for the temp probe? What do you think?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PaulTurner911 Code

Post by rimai »

That works :)
Roberto.
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

Patch submitted. There's now functions for StandardHeater2 and StandardHeater3 same for StandardFan. And if you pass a temp param less than 100 it will be multiplied by 10.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit | Port7Bit ;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit | Port7Bit ;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts =  Port7Bit | Port3Bit ;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit |Port2Bit | Port3Bit | Port5Bit| Port6Bit | Port7Bit| Port8Bit ;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;

// Ports that are always on


////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.Relay.DelayedOn( Port1,1 ); // Return Pump
ReefAngel.Relay.DelayedOn( Port2,90 );// Skimmer
ReefAngel.ActinicLights( Port3 ); // Actinic LEDS
ReefAngel.StandardFan(Port4,790,800);//Chiller 79-80
ReefAngel.StandardHeater(Port5,750,760);//Heater 75-76
//Port6 Kalk/ATO
ReefAngel.DayLights( Port7 ); // White LEDS
//Port 8 Empty
//Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
ReefAngel.Relay.On(Port1);
else
ReefAngel.Relay.Off(Port1);

//ATO Protection
if (ReefAngel.LowATO.IsActive())
ReefAngel.Relay.On(Port6);
else
ReefAngel.Relay.Off(Port6);

//Kalk Dose  10pm-11pm
if (hour() >=22 || hour() < 23)
ReefAngel.Relay.On(Port6);
else
ReefAngel.Relay.Off(Port6);



ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here

///// Place your custom code below here

// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Else, Lagoon, ReefCrest, ShortPulse, LongPulse, Gyre, NutrientTransport };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<900) { 
  // First 15 minutes after feeding mode stops. Return Pump is off
  ReefAngel.Relay.Off(Port1);
  // First 15 minutes after feeding mode stops. Smart_NTM
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()-feeding<4500) { // 15 minutes plus 1 hour
  // Continue NTM for the next 60 minutes (75 minutes total)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY>=81000) { // 8:30am / 10:30pm
  // Night mode (go to 30%)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=Constant;
  ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) { 
  // Custom Mode and nothing else going on
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  if (modes[rmode]==Else) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Mode=Constant;
    ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),25,true );    // ElseMode on sync mode, Portal Speed Setting +/- 25%
  } else {
    ReefAngel.DCPump.Mode=modes[rmode];  // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
  }
} else {
  ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 80, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}

I coded this and the ATO should only run from 10pm-11pm in my eyes. BUT, It doesnt seem to function correctly since I just uploaded and its 12.45pm and Port6 is ON. Any help would be great.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: PaulTurner911 Code

Post by lnevo »

Change the || to &&
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Thank You!!
Image
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Any idea what kind of run time I should get with two pumps on the Jeabo battery backup kit...??
Image
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Hi guys! Its been ages since Ive messed with the tank and/or this program. My skimmer is returning very light product. I think I want it to run every other day.

Skimmer is Port 2. How could I code that?

Thank you in advance!
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PaulTurner911 Code

Post by rimai »

Replace this:

Code: Select all

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
ReefAngel.Relay.On(Port1);
else
ReefAngel.Relay.Off(Port1);
with this:

Code: Select all

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
{
  if (day()%2==0)
  {
    ReefAngel.Relay.On(Port1);
  }
  else
  {
    ReefAngel.Relay.Off(Port1);
  }
}
else
{
  ReefAngel.Relay.Off(Port1);
}
Roberto.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Thanks for the reply Roberto. Im not sure that will do what I want. Pump 1 is my return pump, I would like my skimmer to run for 24hr on and 24hr off, but still turn off when I use the feed mode.
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PaulTurner911 Code

Post by rimai »

Duh... Misread the post. I read Port 1 :(
I'll send code later. Typing on phone....
Roberto.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PaulTurner911 Code

Post by rimai »

Replace this:

Code: Select all

ReefAngel.Relay.DelayedOn( Port2,90 );// Skimmer
With this:

Code: Select all

if (day()%2==0)
{
  ReefAngel.Relay.DelayedOn( Port2,90 );// Skimmer
}
else
{
  ReefAngel.Relay.Off(Port2);
}
Roberto.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

Does anyone have a display menu that is capable of togging the main relay board ports?



New streamlined code

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port2Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 896 );


    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port6 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.Relay.DelayedOn( Port2,90 );
    ReefAngel.Relay.DelayedOn( Port5,5 );
    ReefAngel.PWM.SetChannel( 4, MoonPhase() );
    ReefAngel.PWM.SetChannel( 5, MoonPhase() );
    ////// Place your custom code below here
    
    //Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

    ////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "Paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 80, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}

Image
howaboutme
Posts: 245
Joined: Tue Jan 28, 2014 11:10 am
Location: Northern VA

Re: PaulTurner911 Code

Post by howaboutme »

Paulturner911 wrote:Does anyone have a display menu that is capable of togging the main relay board ports?



New streamlined code

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port2Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 896 );


    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port6 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.Relay.DelayedOn( Port2,90 );
    ReefAngel.Relay.DelayedOn( Port5,5 );
    ReefAngel.PWM.SetChannel( 4, MoonPhase() );
    ReefAngel.PWM.SetChannel( 5, MoonPhase() );
    ////// Place your custom code below here
    
    //Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

    ////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "Paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 80, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}

Do you mean naming the ports? My code does that:

https://forum.reefangel.com/viewtopic.php?f=11&t=4662
Jack
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

I want to be able to turn them on and off from the actual controller joystick.
I also want a fail safe that if the PORT 1 is OFF, it turns off PORT 2 and PORT 5.
Long story short, my app doesn't work reliably, and I don't want to have to sign in to the portal to turn something off or on. I can see the controller anytime on the portal, but the app is random and will not connect if I want it to, but hours later it will toggle the ports I've fiddled with in the app. Then you come home to a pump turned off and a overflowed skimmer and a filter roller that wasted 20' of roll. SUCKS

Any help would be great. Thank you
Image
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: PaulTurner911 Code

Post by Paulturner911 »

I created this with the cloud wizard.

I'm having an issue where my skimmer is overflowing because the return pump is off. I made a if/then to turn off the skimmer and filter roller off if the return pump is ever off. This doesn't seem to work.
Any help would be great.

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.AddStandardMenu();  // Add Standard Menu
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port6Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = 0;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 830 );

    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port6 );

    ////// Place additional initialization code below here


    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.Relay.DelayedOn( Port2,10 );
    ReefAngel.Relay.DelayedOn( Port5,10 );
    ReefAngel.PWM.SetChannel( 4,MoonPhase() );
    if ( ReefAngel.Relay.Status( Port1 ) ) ReefAngel.Relay.Off( Port2 );
    if ( ReefAngel.Relay.Status( Port1 ) ) ReefAngel.Relay.Off( Port5 );
    if ( ReefAngel.Relay.Status( Port1 ) ) ReefAngel.Relay.DelayedOn( Port2,10 );
    if ( ReefAngel.Relay.Status( Port1 ) ) ReefAngel.Relay.DelayedOn( Port5,10 );

    ////// Place your custom code below here


    ////// Place your custom code above here

    ReefAngel.CloudPortal();
    // This should always be the last line
    ReefAngel.ShowInterface();
}



// RA_STRING1=U2FsdGVkX1+wzokeKHQCk87w7JvvcOREK6+LjmUjNMc=
// RA_STRING2=U2FsdGVkX19g+eSJzWd3/2eYdbXZT5v3evtlYFIGeqE=
// RA_STRING3=Nacho Network
// RA_LABEL LABEL_DAYLIGHT=Not Used
// RA_LABEL LABEL_ACTINIC=Not Used
Image
Post Reply