Please any help would be greatly appreciated. I have been using the wizard up to this stage, with limited custom script, but have recently installed a PWM expansion and would like to take over manually on the scripting.
Happy with everything apart from the PWM expansion atm.
Help With my build - PWM Expansion
27 posts
• Page 1 of 3 • 1, 2, 3
![]()
Posts: 80
Joined: Thu Nov 05, 2015 2:45 pm Location: Australia |
Last edited by tyson_mitchell_88 on Thu Dec 31, 2015 3:36 pm, edited 1 time in total.
|
What is it you aren't happy with and what is it you want do?
|
|
![]()
Posts: 80
Joined: Thu Nov 05, 2015 2:45 pm Location: Australia |
I would like to set the parameters for the PMW expansion. My experience so far has been copy and paste. I'm guessing something like this.
ActinicPWMValue=PWMSlope(5,00,21,00,0,100,180,ActinicPWMValue); DaylightPWMValue=PWMSlope(6,30,18,30,0,80,180,DaylightPWMValue); CheckCloud(); ReefAngel.PWM.SetActinic(ActinicPWMValue); ReefAngel.PWM.SetDaylight(DaylightPWMValue); |
Instead of SetActinic and SetDaylight, you are going to use SetChannel(X, ActinicPWMValue) where X is the channel you want to set.
|
|
The CheckCloud routine needs an overhaul, too. What channels on the expansion are you wanting to use for blues and for whites?
|
|
![]()
Posts: 80
Joined: Thu Nov 05, 2015 2:45 pm Location: Australia |
This what I have so far mate, using channel 0 for whites and 1 for actinics. I also have acticics on 4 and 5 for moon.
Last edited by tyson_mitchell_88 on Thu Dec 31, 2015 3:37 pm, edited 1 time in total.
|
What's on 2 and 3?
And what kind of drivers are you using? |
|
![]()
Posts: 80
Joined: Thu Nov 05, 2015 2:45 pm Location: Australia |
Using meanwell LPF drivers on expansion and ELN on standard. Have uvs on channel 2 and 3.
|
What do you want to flash with the lightning?
|
|
![]()
Posts: 80
Joined: Thu Nov 05, 2015 2:45 pm Location: Australia |
I would like to use whites on the standard and channel 0, 4 and 5 on the expansion.
Thanks for helping me out mate. Last edited by tyson_mitchell_88 on Thu Dec 31, 2015 3:41 pm, edited 1 time in total.
|
27 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 2 guests