Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.AddStandardMenu(); // Add Standard Menu
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit; //| Port2Bit| Port5Bit| Port8Bit;;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit| Port3Bit | Port4Bit|| Port5Bit| Port7Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port5Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit| Port3Bit | Port4Bit| Port5Bit| Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 825 );
// Ports that are always on
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.Relay.On(Port1); // Return Pump Port 1 Port1
ReefAngel.SingleATO( true,Port2,600,0 ); // ATO Port 2
ReefAngel.StandardHeater( Port3,780,795 ); // Heater Port 3
ReefAngel.StandardHeater( Port4,780,790 ); // Heater Port 4
//ReefAngel.Relay.On( Port5 ); //Cal Rx pump Port 5
ReefAngel.Relay.Set(Port6,ReefAngel.Relay.Status(Port1)); // Skimmer Port 6
ReefAngel.Relay.On( Port7 ); //Return Port 7
ReefAngel.CO2Control(Port8,730,735); //Regulator Port 8 (PhLow,PhHigh)
//ReefAngel.StandardLights( Port5,14,0,20,0 ); //
// //ReefAngel.Relay.Set(Port5,ReefAngel.Relay.Status(Port7)); // Cal Rx pump Port 5
// ReefAngel.Relay.Set(Port1,ReefAngel.Relay.Status(Port7))
//ReefAngel.Relay.On (Port5); // Fuge Light Port 5 ---- Bsmt De-humidier
//ReefAngel.DosingPumpRepeat( Port7,0,720,14 ); //Alk 15.4 mls
//ReefAngel.DosingPumpRepeat( Port8,5,720,14 );
//for 36 mls
// ReefAngel.DosingPumpRepeat( Port7,0,240,11 ); //Alk
// ReefAngel.DosingPumpRepeat( Port8,5,240,11 );
//box 2 (Box1_Portxx) Expansion Box
//!flips the status of the port for conditional statements
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.ShowInterface();
}