Client Suite 3.0

Community contributed apps
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

Will we see a 3.1 with the addition of a DC Pump tab and additions of everything new.
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Client Suite 3.0

Post by binder »

89delta wrote:Will we see a 3.1 with the addition of a DC Pump tab and additions of everything new.
probably not unless dave creates it. he hasn't been around much for a while, so it's doubtful but you never know. I can ask him and see what he says though.

Sent from my Nexus 7
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

Thank Curt.

Sent from my Samsung Galaxy Note 3
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Client Suite 3.0

Post by binder »

89delta wrote:Will we see a 3.1 with the addition of a DC Pump tab and additions of everything new.
i talked to dave yesterday and he is uncertain about creating a 3.1 version. he honestly didn't think many people were still using it. he has been out of the loop for a while and he actually took down his fish tank. he told me that he was going to grab the latest libraries and look around the forum and try to get caught up on all the new stuff and changes. he was also going to mess around with my test controller too.
so, who knows what will end up coming from this. just thought i would pass the info along.
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Client Suite 3.0

Post by Sacohen »

I think the only reason people aren't using it is because it hasn't been kept up to date.
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

I use it on my media PC and let it run in the background. I actually enjoy the graphing feature of it, being able to see any changes during the day or week while gone for work. But its good to hear Curt.

Sent from my Samsung Galaxy Note 3
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Client Suite 3.0

Post by binder »

ok, good info.

i will see if i can push him to update it more....gotta move carefully with him. :-)


Sent from my iPad mini
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

Am in no rush. Am sure we all have been using our phones and tablets for the most part. But an apdate maybe every year or two would be good as well.JMHO But love everything else you all have done so far to bring the RA to this point.

Sent from my Samsung Galaxy Note 3
dmolton
Posts: 182
Joined: Tue Mar 22, 2011 11:08 am

Re: Client Suite 3.0

Post by dmolton »

Sorry there hasn't been any activity on this project. Like Curt mentioned, my tank has been broken down for awhile now and I didn't think there was much interest anymore. Seeing as there is at least a little bit I can certainly try to push out another update for you guys.

After hearing from Curt yesterday I began piecing together the old development environment to try and get back to where I was. Unfortunately, I think i lost the installer project which as far as this project is concerned, was always one of the biggest obstacles for me. I'll keep looking.

I've only quickly scanned this thread but it seems for sure we're looking for DC Pump support on the main tab or as another tab. I'll need to do a little research on the board and see what kind of capabilities we have with the pump. Also looks like the ini file needs to be updated to support the latest libraries. I'll see if i can find any glaring bugs. Anything else?

I think short-term I'm going to dump all the source code for the project on github in case others want to maintain/branch for a new application. The client user interface has some dependencies on old registered third party controls so its not super friendly for other developers to pick it up and run with it right away.
Long-term I'd like to start a new open source project on github to create a new desktop app to modernize the look and feel while using up-to-date tools and technologies.
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

That would be awesome Dave. I'd certainly get a copy from github to see how the code structure works for the program...if not too hard I'd be willing to give it a shot.

Sent from my Samsung Galaxy Note 3
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Client Suite 3.0

Post by binder »

woohoo....and the silent man speaks. :-)

see, the interest is there and people are willing to help.


Sent from my iPad mini
Kungpaoshizi
Posts: 52
Joined: Wed Sep 16, 2015 8:12 am

Re: Client Suite 3.0

Post by Kungpaoshizi »

Just fired it up, first issue was the scan didn't detect it in the internal address space.. Might be router settings, lmk if you need more info.
Nice slick setup so far :)
reef angel client suite wifi.jpg
reef angel client suite wifi.jpg (79.45 KiB) Viewed 21154 times
User avatar
madweazl
Posts: 44
Joined: Tue Dec 03, 2013 3:08 am
Location: Fredericksburg, VA

Re: Client Suite 3.0

Post by madweazl »

I just recently got the RA setup and have been using the client for the past few days. I was curious if the issue in the attachment is related to something I've inadvertently done or just something with the client. If I did it, any idea how to reverse what I've done LOL? The issue is that I have a few lines of the same temp (e.g. two lines of 80°, two lines of 79° etc.). I end up with the same issue on the pH plots as well. If I open and close the app, occasionally I'll get something a little different. I've restarted the computer, stop/started the services etc. but nothing seems to correct it.
Attachments
gui.jpg
gui.jpg (102.75 KiB) Viewed 20864 times
Image
silkjc
Posts: 11
Joined: Sat Aug 27, 2016 6:51 am

Re: Client Suite 3.0

Post by silkjc »

Just posting to say I really love this application and find it much quicker to use than the portal. I hope development can continue!
GermanDude
Posts: 87
Joined: Tue Dec 27, 2016 6:26 am
Location: Jacksonville,FL

Re: Client Suite 3.0

Post by GermanDude »

+1
I use this application a lot since I bought my RA+.
-James-

Image
troylong45
Posts: 214
Joined: Sat Oct 10, 2015 9:17 pm

Re: Client Suite 3.0

Post by troylong45 »

How does this work. Is it connected via ttl/usb to windows 10? I want to get a windows 2 in 1 or a full windows tablet and connect to it will this work?
Image
User avatar
madweazl
Posts: 44
Joined: Tue Dec 03, 2013 3:08 am
Location: Fredericksburg, VA

Re: Client Suite 3.0

Post by madweazl »

troylong45 wrote:How does this work. Is it connected via ttl/usb to windows 10? I want to get a windows 2 in 1 or a full windows tablet and connect to it will this work?
I have it connected to my desktop (works on Windows 7 and 10) via USB/TTL. In the Settings, Notifications tab, you must check the "send parameters to Reef Angel Portal for online viewing." The SMS and email feature is very handy as well.
Image
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Client Suite 3.0

Post by Irieivan »

I want to see my water level on the client. Searched here and found this:

Where do I upload this?

In the code?

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit( Celsius ); // set to Celsius Temperature

ReefAngel.AddStandardMenu(); // Add Standard Menu

ReefAngel.Use2014Screen(); // Let's use 2014 Screen
ReefAngel.AddWaterLevelExpansion(); // Water Level Expansion Module
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port8Bit;
ReefAngel.FeedingModePortsE[0] = Port1Bit | Port5Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port6Bit;
ReefAngel.WaterChangePortsE[0] = Port1Bit | Port2Bit | Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
ReefAngel.LightsOnPortsE[0] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port4Bit | Port7Bit;
ReefAngel.OverheatShutoffPortsE[0] = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 280 );


// Ports that are always on
ReefAngel.Relay.On( Port1 );
ReefAngel.Relay.On( Port8 );
ReefAngel.Relay.On( Box1_Port1 );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.PHControl( Port2,818,820 );
ReefAngel.StandardLights( Port4,11,0,21,30 );
ReefAngel.Relay.DelayedOn( Port5,1 );
ReefAngel.WaterLevelATO( Port6,120,42,44 );
ReefAngel.StandardHeater( Port7,255,265 );
ReefAngel.Relay.DelayedOn( Box1_Port5,1 );
////// Place your custom code below here


////// Place your custom code above here

// This should always be the last line
ReefAngel.ShowInterface();
I don't see any option in the client settings to view water level expansion, just float switches.

Apologies if a stupid question, but am totally new to this
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Client Suite 3.0

Post by lnevo »

The client is no longer being developer. It still works but I believe the water level sensor came after the client's last release. There is nothing to add to your code for the chart I posted.
89delta
Posts: 163
Joined: Mon Oct 15, 2012 7:21 pm
Location: Leesburg, GA

Re: Client Suite 3.0

Post by 89delta »

Anyone else having issues with the checkbox for send parameters to Reef Angel Portal for online viewing? I keep trying to click it but nothing happens.
Post Reply