Cannot get Wifi Conected

Basic / Standard Reef Angel hardware
Post Reply
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Cannot get Wifi Conected

Post by Irieivan »

I have tried with the manual, but keep getting an authentication false. I have updated firmware and restored factory settings on the attachment, but keep getting an authentication false and an IP of 0.0.0:2000.

I am using a Vodafone R216 router and the password is definitely correct.
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Cannot get Wifi Conected

Post by Irieivan »

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Wifi Attachment Connected to COM3
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Wifi Attachment Connected to COM3
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobile
< set w s VodafoneMobile
< AOK
< <4.41>
> set w p 0775964558
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
> reboot
< <4.41>
< reboot
> $$$
< CMD
> show n
< show n
< SSid=VodafoneMobile
< Chan=1
< Assoc=FAIL
< Rate=12, 24Mb
< Auth=FAIL
< Mode=NONE
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobileWiFi-D08392
< set w s VodafoneMobileWiFi-D08392
< AOK
< <4.41>
> set w p 0775964558
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
> show n
< show n
< SSid=VodafoneMobileWiFi-D08392
< Chan=5
< Assoc=OK
< Rate=12, 24Mb
< Auth=FAIL
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobileWiFi-DO8392
< set w s VodafoneMobileWiFi-DO8392
< AOK
< <4.41>
> set w p 0775964558
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
> show n
< show n
< SSid=VodafoneMobileWiFi-DO8392
< Chan=1
< Assoc=FAIL
< Rate=12, 24Mb
< Auth=FAIL
< Mode=NONE
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Found router R216

Unable to setup port forwarding. This step will have to be done manually. For more information for your specific type of router, please visit http://www.portforward.com
Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
> save
< <4.41>
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobileWiFi-D08392
< set w s VodafoneMobileWiFi-D08392
< AOK
< <4.41>
> set w p 0775964558
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
> show n
< show n
< SSid=VodafoneMobileWiFi-D08392
< Chan=5
< Assoc=OK
< Rate=12, 24Mb
< Auth=FAIL
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Found router R216

Unable to setup port forwarding. This step will have to be done manually. For more information for your specific type of router, please visit http://www.portforward.com
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Wifi Attachment Connected to COM3
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobileWiFi-D08392
< set w s VodafoneMobileWiFi-D08392
< AOK
< <4.41>
> set w p 0775964558
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
> show n
< show n
< SSid=VodafoneMobileWiFi-D08392
< Chan=5
< Assoc=OK
< Rate=12, 24Mb
< Auth=FAIL
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Found router R216

Unable to setup port forwarding. This step will have to be done manually. For more information for your specific type of router, please visit http://www.portforward.com
Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
> ftp u
< ftp u
< <4.41>
< FTP connecting to 198.175.253.161
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< FTP timeout=2
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM3
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Wifi Attachment Connected to COM3
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s VodafoneMobileWiFi-D08392
< set w s VodafoneMobileWiFi-D08392
< AOK
< <4.41>
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Disconn from VodafoneMobileWiFi-D08392,2:5
> set w p 0775964558
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
< set w p 0775964558
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
< Disconn from VodafoneMobileWiFi-D08392,AUTH-ERR
< Auto-Assoc VodafoneMobileWiFi-D08392 chan=5 mode=MIXED SCAN OK
< Joining VodafoneMobileWiFi-D08392 now..
> show n
< show n
< SSid=VodafoneMobileWiFi-D08392
< Chan=5
< Assoc=OK
< Rate=12, 24Mb
< Auth=FAIL
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=0
< <4.41>
> get i
< get i
< IF=DOWN
< DHCP=ON
< IP=0.0.0.0:2000
< NM=255.255.255.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Found router R216

Unable to setup port forwarding. This step will have to be done manually. For more information for your specific type of router, please visit http://www.portforward.com
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Cannot get Wifi Conected

Post by rimai »

Can you try changing the security on your router to wap2-psk?
Also, both ssid and pwd are case sensitive, so make sure they match same case.
Roberto.
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Cannot get Wifi Conected

Post by Irieivan »

Thank you for your prompt response. I don't have an option for wap2-psk, only for WPA2-psk, which is its default setting
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Cannot get Wifi Conected

Post by rimai »

Sorry. Typo :(
If it is already set that way, it can only be the ssid/pwd that are not correct somehow
Roberto.
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Cannot get Wifi Conected

Post by Irieivan »

I used my iPhone as a modem this time, got a little further, but still not connecting, even though on hot spot connections it shows there is a connection.... still getting the same ip address
:twisted: :oops:
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Opening Serial Port...
Verifying speed at 9600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM3
Connected to serial port COM3
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Wifi Attachment Connected to COM3
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM3
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 1052 10 user
< 26 88548 3 wifly-GSX-441-r1057
< 27 88548 3 NO NAME
<
< 130 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s iPhone
< set w s iPhone
< AOK
< <4.41>
> set w p qwertypoops
< set w p qwertypoops
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
> show n
< show n
< SSid=iPhone
< Chan=1
< Assoc=OK
< Rate=12, 24Mb
< Auth=OK
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=1
< <4.41>
> get i
< get i
< IF=UP
< DHCP=ON
< IP=0.0.0.0:2000
< NM=0.0.0.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM3
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Cannot get Wifi Conected

Post by Irieivan »

And even when I change my SSID (modem name) and passwords to things I cannot possibly get wrong, I get the same results???
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Cannot get Wifi Conected

Post by rimai »

This last one says it is connected.
IF=UP means it is connected.
The DHCP must have just taken too long to give out the ip address and the unit just reported 0.0.0.0, but if you look at the unit, it should be blinking green and if you look at the iphone connected devices, it should have a connected device to it.
Roberto.
Irieivan
Posts: 51
Joined: Sun Aug 20, 2017 6:19 am

Re: Cannot get Wifi Conected

Post by Irieivan »

yes but I kept getting blue lights and no IP .

what eventually worked, was to make security settings open on my router with no password, and simply typing in a random password.

Thanks again
Post Reply