Problem orp

Expansion modules and attachments
Post Reply
ROBBYMAN86
Posts: 13
Joined: Sat Jul 21, 2018 7:41 am

Problem orp

Post by ROBBYMAN86 »

Hi, I would have a problem with the orp probe. I lost the bnc ahead, how can I calibrate it

Inviato dal mio CLT-L09 utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Problem orp

Post by rimai »

Use a paper clip to short out the center pin to the outer shell.
Roberto.
ROBBYMAN86
Posts: 13
Joined: Sat Jul 21, 2018 7:41 am

Re: Problem orp

Post by ROBBYMAN86 »

rimai wrote:Use a paper clip to short out the center pin to the outer shell.
Done but nothing happens, the reader has always been 0 even with the probe inserted.

Inviato dal mio CLT-L09 utilizzando Tapatalk
ROBBYMAN86
Posts: 13
Joined: Sat Jul 21, 2018 7:41 am

Re: Problem orp

Post by ROBBYMAN86 »

???

Inviato dal mio CLT-L09 utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Problem orp

Post by rimai »

It may be your orp module if it is showing always zero.
Roberto.
ROBBYMAN86
Posts: 13
Joined: Sat Jul 21, 2018 7:41 am

Re: Problem orp

Post by ROBBYMAN86 »

rimai wrote:It may be your orp module if it is showing always zero.
There is no way to understand if it works?

Inviato dal mio CLT-L09 utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Problem orp

Post by rimai »

Make sure the usb cable is plugged correctly and power supply too.
If they are and you still get zero, it can only be the module.
Roberto.
ROBBYMAN86
Posts: 13
Joined: Sat Jul 21, 2018 7:41 am

Re: Problem orp

Post by ROBBYMAN86 »

Ok I try and update you

Inviato dal mio CLT-L09 utilizzando Tapatalk
Post Reply