Purchased used unit

Post Reply
Rookie77
Posts: 2
Joined: Mon Sep 02, 2019 2:42 pm

Purchased used unit

Post by Rookie77 »

Good morning all,

I purchased a used setup and it has a reef angel plus controller, wifi attachment (and the cable for it). I wanted to return the unit to default and see if the controller works as many of the other components I was sold is faulty. This is why I'm a little hesitant to spend the $40ish dollars for a ttl to serial cable. (From canada)

Does anyone have a pinout for this cable so I can at least try to program before I start spending money on other accessories?
I have several arduino components, the ttl to serial convertor and Dupont connectors.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Purchased used unit

Post by rimai »

ftdi.png
ftdi.png (10.15 KiB) Viewed 3968 times
Roberto.
Rookie77
Posts: 2
Joined: Mon Sep 02, 2019 2:42 pm

Re: Purchased used unit

Post by Rookie77 »

Great, thanks. Board wouldn't power with my serial to ttl connected with this pinout. I changed the VCC location and got it to download the factory default program. Looking forward to trying this out tonight!
Thanks again
Post Reply