Reef Angel Forum

Posted: **Mon Jun 23, 2014 4:27 pm**

lnevo wrote:Lol what was the issue that you couldnt set the % on the 2nd pump differently?

That was one issue, but the one that didn't get resolved is that the portal shows every option available to the RA when it is in Else Mode.

I started a new thread so we don't fill up Paul's thread with this issue,

http://forum.reefangel.com/viewtopic.php?f=12&t=4696

Posted: **Mon Jun 23, 2014 4:48 pm**

Code: Select all

if (rmode==Else) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Mode=Constant;
    ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),25,true );    // ElseMode on sync mode, Portal Speed Setting +/- 20%
  } else {

Should this call "else" when "constant" is selected?

Posted: **Mon Jun 23, 2014 7:09 pm**

Its constant because we want the pump set at the speed that elsemode calculates. We could also put it in Custom mode here but then you would have to call the pwm commands directly.

Posted: **Mon Jun 23, 2014 7:17 pm**

OK, I was trying to replicate his portal issue showing EVERYTHING, since I am running pretty much the same code.

Lee, If you get a min, please glance over my code and tell me if you see any issues in the stuff I cut and pasted from Sacohens code. Like I said, it uploaded

Ive run feedmode and all seemed well.

Ill keep an eye out for else mode and wonky portal display. Is it only the day (in my case) that random calls ELSEMODE that the portal shows this?

Posted: **Tue Jun 24, 2014 4:30 am**

Where is it?

Posted: **Tue Jun 24, 2014 5:01 am**

lnevo wrote:Where is it?

Sorry Lee, I must have neglected to attach it. Ill plug it in later this evening.
Everything seems ok, I just took my old code and added a few things I saw in Sacohens code that seemed like it was needed for Else mode.

Just kept clicking away and reading bits and pieces of threads.

Thanks!

Posted: **Thu Jun 26, 2014 5:32 pm**

This is current:

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port2Bit | Port3Bit | Port7Bit | Port8Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port6Bit | Port7Bit | Port8Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;


// Ports that are always on

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.DayLights( Port1 ); // Return Pump
ReefAngel.StandardFan( Port2 ); // Canopy Fans
ReefAngel.ActinicLights( Port3 ); // Actinic LEDS
//Port4 Kalk/ATO
//Port5 Kalk Stir
ReefAngel.DayLights( Port6 );//Port 6 Skimmer
ReefAngel.DayLights( Port7 ); // MH 1
ReefAngel.DayLights( Port8 ); //MH 2
//Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
ReefAngel.Relay.On(Port1);
else
ReefAngel.Relay.Off(Port1);

//ATO Protection
if (ReefAngel.LowATO.IsActive())
ReefAngel.Relay.On(Port4);
else
ReefAngel.Relay.Off(Port4);

//Kalk Dose 60sec @ 11pm-12pm (every 15min)
if (hour() >=23 || hour() < 12)
ReefAngel.Relay.Set(Port4, now()%900<60);
else
ReefAngel.Relay.Off(Port4);

//Kalk Stir 12pm-1pm
if (hour() >=12 & hour() < 13)
ReefAngel.Relay.On(Port5);
else
ReefAngel.Relay.Off(Port5);

ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here

///// Place your custom code below here

// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;

// Add Else Mode definition..
const int Else=16;

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Lagoon, Else, ReefCrest, TidalSwell, ShortPulse, LongPulse, NutrientTransport };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<900) { 
  // First 15 minutes after feeding mode stops. Return Pump is off
  ReefAngel.Relay.Off(Port1);
  // First 15 minutes after feeding mode stops. Smart_NTM
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()-feeding<4500) { // 15 minutes plus 1 hour
  // Continue NTM for the next 60 minutes (75 minutes total)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY>=81000) { // 8:30am / 10:30pm
  // Night mode (go to 30%)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=Constant;
  ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) { 
  // Custom Mode and nothing else going on
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  if (rmode==Else) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Mode=Constant;
    ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),25,true );    // ElseMode on sync mode, Portal Speed Setting +/- 25%
  } else {
    ReefAngel.DCPump.Mode=modes[rmode];  // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
  }
} else {
  ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 84, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 3000);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}

Posted: **Fri Jun 27, 2014 9:51 am**

Change this line

Code: Select all

  if (rmode==Else) {

to

Code: Select all

  if (modes[rmode]==Else) {

Posted: **Fri Jun 27, 2014 3:40 pm**

Thanks

Posted: **Wed Jul 23, 2014 2:43 pm**

Current code below. I am having an issue with the 2 DC pumps, sometimes the screen on the controller shows values but the pumps arent working. Its random, maybe an issue with else mode?
How can I activate else mode to see?

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port2Bit | Port3Bit | Port7Bit | Port8Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port6Bit | Port7Bit | Port8Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;


// Ports that are always on

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.DayLights( Port1 ); // Return Pump
ReefAngel.StandardFan( Port2 ); // Canopy Fans
ReefAngel.ActinicLights( Port3 ); // Actinic LEDS
//Port4 Kalk/ATO
//Port5 Kalk Stir
ReefAngel.DayLights( Port6 );//Port 6 Skimmer
ReefAngel.DayLights( Port7 ); // MH 1
ReefAngel.DayLights( Port8 ); //MH 2
//Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
ReefAngel.Relay.On(Port1);
else
ReefAngel.Relay.Off(Port1);

//ATO Protection
if (ReefAngel.LowATO.IsActive())
ReefAngel.Relay.On(Port4);
else
ReefAngel.Relay.Off(Port4);

//Kalk Dose 60sec @ 11pm-12pm (every 15min)
if (hour() >=23 || hour() < 12)
ReefAngel.Relay.Set(Port4, now()%900<60);
else
ReefAngel.Relay.Off(Port4);

//Kalk Stir 12pm-1pm
if (hour() >=12 & hour() < 13)
ReefAngel.Relay.On(Port5);
else
ReefAngel.Relay.Off(Port5);

ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here

///// Place your custom code below here

// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;

// Add Else Mode definition..
const int Else=16;

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Lagoon, Else, ReefCrest, TidalSwell, ShortPulse, LongPulse, NutrientTransport };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<900) { 
  // First 15 minutes after feeding mode stops. Return Pump is off
  ReefAngel.Relay.Off(Port1);
  // First 15 minutes after feeding mode stops. Smart_NTM
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()-feeding<4500) { // 15 minutes plus 1 hour
  // Continue NTM for the next 60 minutes (75 minutes total)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY>=81000) { // 8:30am / 10:30pm
  // Night mode (go to 30%)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=Constant;
  ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) { 
  // Custom Mode and nothing else going on
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  if (modes[rmode]==Else) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Mode=Constant;
    ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),25,true );    // ElseMode on sync mode, Portal Speed Setting +/- 25%
  } else {
    ReefAngel.DCPump.Mode=modes[rmode];  // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
  }
} else {
  ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 84, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 3000);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}

Posted: **Wed Jul 23, 2014 3:18 pm**

Remove everything else from the list of options except else mode and then that will be the one that it chooses.

Posted: **Wed Jul 23, 2014 3:41 pm**

I'm not sure how to.
No way to call it from a memory location manually?

Ok, I think I understand.
Thanks

Posted: **Wed Jul 23, 2014 3:54 pm**

Change this...

Code: Select all

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Lagoon, Else, ReefCrest, TidalSwell, ShortPulse, LongPulse, NutrientTransport };

To this...

Code: Select all

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Else };

Posted: **Wed Jul 23, 2014 4:20 pm**

Posted: **Tue Aug 05, 2014 1:43 pm**

Could someone refresh my memory on how to have Relay 6 run constant, unless Im in feed mode?

I didnt realize it but when I added the skimmer it runs on the same schedule as my MH lamps. I would like it to be on all of the time unless its in feed mode.
Any help is greatly apprerciated.

Thank you

Posted: **Tue Aug 05, 2014 2:00 pm**

You need 2 things....

This in // Ports toggled in Feeding Mode

Code: Select all

ReefAngel.FeedingModePorts = Port6Bit;

And then in // Ports that are always on

Code: Select all

ReefAngel.Relay.On( Port6 );

If you want to delay the start after feeding mode by 10 min so your main pump gets up to speed and your water leve gets back to normal you can add this in the loop section...

Code: Select all

ReefAngel.Relay.DelayedOn( Port6,10 );

Posted: **Tue Aug 12, 2014 3:28 pm**

Great! Thank you

Posted: **Tue Oct 28, 2014 12:14 pm**

I HAVE PICKED UP A NEW TANK!!!
Im wondering if I should just run the wizard and start over, but cut and paste some "custom lines" ??? Please advise which would be easier.

Ditching a few things -
MH (port7&8)
FANS (port2)
ACTINIC (port3)

I have a few things that Id like to add-
3 Ecoray112DX whites/red (port7) Actinics (port8)
Chiller (port2) Should function similar to the fan settings? * NEEDS TO SHUT DOWN IN FEED/WATERCHANGE MODES
Skimmer (port3) ** Id like it off for 2 hours after feedmode activation

ANY AND ALL INPUT IS WELCOMED AND VERY APPRECIATED

Posted: **Tue Oct 28, 2014 12:18 pm**

I would keep what you have and go in and manually cut out what you don't want.

Then use the wizard to create the code you want to add and paste it in to your existing code.

Posted: **Tue Oct 28, 2014 12:49 pm**

Ill give it a try!! thanks

Posted: **Tue Nov 04, 2014 4:53 pm**

I decided to keep my code and change a few relays and make it work for the most part. I have the following questions:

Chiller will now be on port 2. It has a 2 deg variance, if I want the tank at 78 i would set this to 80?

Code: Select all

ReefAngel.LCD.DrawOutletBox( 12, 80, TempRelay );

Wouldnt it then turn the chiller off when it goes to 79?

Skimmer is on port 6- Does shut off in feedmode , but I would like this to have a 2 hour delay after feed mode. How would i code this?

Thanks guys!

Posted: **Wed Nov 05, 2014 5:36 am**

No that code is for screen drawing. Post your code and I'll be able to help

Posted: **Wed Nov 05, 2014 6:56 pm**

Code: Select all

// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit ;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port6Bit | Port7Bit ;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts =  Port3Bit | Port7Bit ;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port3Bit | Port6Bit | Port7Bit ;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;


// Ports that are always on
ReefAngel.Relay.On( Port6 );
////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.DayLights( Port1 ); // Return Pump
//Port 2 Chiller
ReefAngel.ActinicLights( Port3 ); // Actinic LEDS
//Port4 Kalk/ATO
//Port5 Kalk Stir
ReefAngel.DayLights( Port6 );// Skimmer
ReefAngel.DayLights( Port7 ); // White LEDS
//Port8 Empty
//Moonlight Phase 9pm-10am (CH4-CH5)
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 4,(0) );
else 
ReefAngel.PWM.SetChannel( 4, MoonPhase() );
if ( (hour() >=10) && (hour() <21) ) 
ReefAngel.PWM.SetChannel( 5,(0) );
else
ReefAngel.PWM.SetChannel( 5, MoonPhase() );

//Over Flow Protection
if (ReefAngel.HighATO.IsActive())
ReefAngel.Relay.On(Port1);
else
ReefAngel.Relay.Off(Port1);

//ATO Protection
if (ReefAngel.LowATO.IsActive())
ReefAngel.Relay.On(Port4);
else
ReefAngel.Relay.Off(Port4);

//Kalk Dose 60sec @ 11pm-12pm (every 15min)
if (hour() >=23 || hour() < 12)
ReefAngel.Relay.Set(Port4, now()%900<65);
else
ReefAngel.Relay.Off(Port4);

//Kalk Stir 12pm-1pm
if (hour() >=12 & hour() < 13)
ReefAngel.Relay.On(Port5);
else
ReefAngel.Relay.Off(Port5);

ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here

///// Place your custom code below here

// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;

// Add Else Mode definition..
const int Else=16;

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { Else, Lagoon, Else, ReefCrest, ShortPulse, LongPulse, NutrientTransport };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<900) { 
  // First 15 minutes after feeding mode stops. Return Pump is off
  ReefAngel.Relay.Off(Port1);
  // First 15 minutes after feeding mode stops. Smart_NTM
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()-feeding<4500) { // 15 minutes plus 1 hour
  // Continue NTM for the next 60 minutes (75 minutes total)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY>=81000) { // 8:30am / 10:30pm
  // Night mode (go to 30%)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Mode=Constant;
  ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) { 
  // Custom Mode and nothing else going on
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  if (modes[rmode]==Else) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Mode=Constant;
    ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),25,true );    // ElseMode on sync mode, Portal Speed Setting +/- 25%
  } else {
    ReefAngel.DCPump.Mode=modes[rmode];  // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
  }
} else {
  ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "paulturner911" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Dimming Expansion
x = 15;
y = 2;
for ( int a=0;a<6;a++ )
{
if ( a>2 ) x = 75;
if ( a==3 ) y = 2;
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x,y,"Ch :" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+12,y,a );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
y += 10;
}
pingSerial();

// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 80, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 3000);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}

Posted: **Thu Nov 06, 2014 8:33 am**

I've noticed that the skimmer (port6) is functioning like the old mh ports 7/8 as far as off and on schedule.

Is like this to run 24/7 unless water change or feed mode has been activated.

Thanks

Posted: **Thu Nov 06, 2014 8:52 am**

Port 6 is included in Feeding, Water Change and Overheating off.
You also have it as Always on.

The one line of code that refers to Port 6 that I see has no time associated to it.
it just this...

ReefAngel.DayLights( Port6 );// Skimmer

Posted: **Thu Nov 06, 2014 10:16 am**

Port 6 definatly does not run 24/7
It does shut off for WC and feed mode correct.
I would like it to stay off for 2 hours after either.
What should it read? It's currently shitting down with the "daylight" LEDs.

Thank you

Posted: **Thu Nov 06, 2014 12:47 pm**

I think it has to do with this ReefAngel.DayLights( Port6 );// Skimmer

Just remove this line ReefAngel.DayLights( Port6 );// Skimmer and it should stay on all the time except Feeding, Water Change and Overheat because of this...

// Ports that are always on
ReefAngel.Relay.On( Port6 );

You can probably remove i the Port6Bit from the Overheat as well, you don't need to turn off the skimmer during an overheat situation.

Posted: **Thu Nov 06, 2014 4:19 pm**

He wanted a delay so use DelayedOn instead of On and put 120 as the second argument for 2 hours.

Posted: **Thu Nov 06, 2014 5:55 pm**

Code: Select all

// Ports that are always on
ReefAngel.Relay.DelayedOn( Port6 );120;

will this work?

Posted: **Thu Nov 06, 2014 8:36 pm**

ReefAngel.Relay.DelayedOn(Port6, 120);

Reef Angel Forum

PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code

Re: PaulTurner911 Code