Reef Angel Forum

Code: Select all

ReefAngel.Relay.Override(Port6,0);

Code: Select all

ReefAngel.Relay.Override(Port6, ~bitRead(ReefAngel.Relay.RelayMaskOff, Port6Bit)*2);

Code: Select all

ReefAngel.DisplayedMenu = RETURN_MAIN_MODE;

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <ReefAngel.h>

// Custom menus
#include <avr/pgmspace.h>
prog_char menu1_label[] PROGMEM = "Feeding";
prog_char menu2_label[] PROGMEM = "Water Change";
prog_char menu3_label[] PROGMEM = "Acclimation";
prog_char menu4_label[] PROGMEM = "Refugium Light";
prog_char menu5_label[] PROGMEM = "ATO Clear";
prog_char menu6_label[] PROGMEM = "Overheat Clear";
prog_char menu7_label[] PROGMEM = "PH Calibration";
prog_char menu8_label[] PROGMEM = "WLS Calibration";
prog_char menu9_label[] PROGMEM = "Date / Time";

// Group the menu entries together
PROGMEM const char *menu_items[] = {
menu1_label, menu2_label, menu3_label,
menu4_label, menu5_label, menu6_label,
menu7_label, menu8_label, menu9_label
};

////// Place global variable code below here

unsigned long ATOUpdate=0;
////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port4Bit | Port6Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit;
// Use T2 probe as temperature and overheat functions
ReefAngel.TempProbe = T2_PROBE;
ReefAngel.OverheatProbe = T2_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 825 );


// Ports that are always on
ReefAngel.Relay.On( Port4 );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.StandardLights( Port1,12,0,22,0 );
ReefAngel.StandardLights( Port2,13,0,21,0 );
ReefAngel.Relay.Set( Port3, !ReefAngel.Relay.Status( Port1 ) );
ReefAngel.StandardLights( Port7,13,0,21,0 );
ReefAngel.Relay.Set(Port5,(now()-3600)%21600<1200); // Runs for 1200s every 21600 seconds
ReefAngel.Relay.Set(Port8,((now()-3600)-1200)%21600<1200); // Runs for 1200s every 21600 seconds with 1200s offset
ReefAngel.WaterLevelATO(Port6,720,30,30); // Enable ATO the ATO
if (ReefAngel.Relay.Status(Port5)) // Check to see if port 5 is on and update time is empty
{ 
ATOUpdate = now(); // If so, set the update time to now
} 

if (now() - ATOUpdate < 120) // If it hasnt been 120 seconds turn off the port
{ 
ReefAngel.WaterLevelATO(Port6,720,0,1);
}
ReefAngel.PWM.SetActinic(MyCustomWave(50));
if( ReefAngel.DisplayedMenu==FEEDING_MODE ) ReefAngel.PWM.SetActinic(0);
if( ReefAngel.DisplayedMenu==WATERCHANGE_MODE ) ReefAngel.PWM.SetActinic(0);
if (hour()<12 || hour()>=22) ReefAngel.PWM.SetActinic(30);
////// Place your custom code below here


////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "Sacohen","Seth0310" );
ReefAngel.ShowInterface();
}

// Menu Code
void MenuEntry1() {
  ReefAngel.FeedingModeStart();
}
void MenuEntry2() {
  ReefAngel.WaterChangeModeStart();
}
void MenuEntry3() {
  ReefAngel.Relay.Override(Port6,0);
  ReefAngel.DisplayedMenu = RETURN_MAIN_MODE;
}
void MenuEntry4() {
  // Toggle refugium light between on/auto.
  ReefAngel.Relay.Override(Refugium, ReefAngel.Relay.Status(Refugium)+1);
  ReefAngel.DisplayedMenu = RETURN_MAIN_MODE;
}
void MenuEntry5() {
  ReefAngel.ATOClear();
  ReefAngel.DisplayMenuEntry("Clear ATO Timeout");
}
void MenuEntry6() {
  ReefAngel.OverheatClear();
  ReefAngel.DisplayMenuEntry("Clear Overheat");
}
void MenuEntry7() {
  ReefAngel.SetupCalibratePH();
  ReefAngel.DisplayedMenu = ALT_SCREEN_MODE;
}
void MenuEntry8() {
  ReefAngel.SetupCalibrateWaterLevel();
  ReefAngel.DisplayedMenu = ALT_SCREEN_MODE;
}
void MenuEntry9() {
  ReefAngel.SetupDateTime();
  ReefAngel.DisplayedMenu = ALT_SCREEN_MODE;
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Water Level
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,75,66, "WL:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,66, ReefAngel.WaterLevel.GetLevel() );
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 92, TempRelay );
pingSerial();

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
byte MyCustomWave(byte maxspeed)
{
static byte randomspeed=0;
if (now()%11<5)
{
return randomspeed;
}
else if (now()%11>=5 && now()%11<10)
{
return maxspeed;
}
else
{
randomspeed=random(35,maxspeed);
return 0;
}
}

Code: Select all

void MenuEntry4() {
// Toggle refugium light between on/auto.
ReefAngel.Relay.Override(Port1, Port2, ReefAngel.Relay.Status(Port1, Port2)+1);
ReefAngel.DisplayedMenu = RETURN_MAIN_MODE;
}

Code: Select all

ReefAngel.Relay.Override(Port6, ~bitRead(ReefAngel.Relay.RelayMaskOff, Port6Bit)*2);

Code: Select all

ReefAngel.Relay.Override(Port6, ~bitRead(ReefAngel.Relay.RelayMaskOff, 5)*2);