Nano tank
Posted: Thu Feb 11, 2016 12:31 pm
Hello,
Just thought I'd share my nano with you guys. Total volume is 80L and the display is 460x380x390.
(Sorry for the crappy pic quality. It's a special ability I have)
Livestock is 1 Anthias, 2x clowns and a six line wrasse. My fire shrimp recently decided to.... Die after 2.5 years so I need to get two more.
My RA is currently used more for fail safe and emergency control than total integration.
Before getting the RA I had a doser, DIY Led's (on a typhoon) and a Tunze osmolater so those functions are still handled by these units but they are run off the relay box. I will eventually migrate the lighting to the RA.
Return is a sicce syncra, and flow is via wp10 and an rw4. It's a zeo tank that uses my really dodgey DIY reactor :p
Coolest thing I've got running is the power fail mode I stole from Lee's code.
I have a little relay hooked up that triggers a power out mode in a power failure. This turns off everything except the return pump but turns the zeo reactor and skimmer on for about a minute every half hour to keep things oxygenated and stop the zeo stones from going all stinky and gross. This has literally saved my tank on many occasions.
Sump.....
Just thought I'd share my nano with you guys. Total volume is 80L and the display is 460x380x390.
(Sorry for the crappy pic quality. It's a special ability I have)
Livestock is 1 Anthias, 2x clowns and a six line wrasse. My fire shrimp recently decided to.... Die after 2.5 years so I need to get two more.
My RA is currently used more for fail safe and emergency control than total integration.
Before getting the RA I had a doser, DIY Led's (on a typhoon) and a Tunze osmolater so those functions are still handled by these units but they are run off the relay box. I will eventually migrate the lighting to the RA.
Return is a sicce syncra, and flow is via wp10 and an rw4. It's a zeo tank that uses my really dodgey DIY reactor :p
Coolest thing I've got running is the power fail mode I stole from Lee's code.
I have a little relay hooked up that triggers a power out mode in a power failure. This turns off everything except the return pump but turns the zeo reactor and skimmer on for about a minute every half hour to keep things oxygenated and stop the zeo stones from going all stinky and gross. This has literally saved my tank on many occasions.
Sump.....