Page 1 of 1
flashing red status
Posted: Wed Jan 25, 2012 6:52 pm
by rossbryant1956
hooked up new unit. only get green power and red flashing status and nothing on the screen. help.
thx
Re: flashing red status
Posted: Wed Jan 25, 2012 7:01 pm
by rimai
Can you try loading a code to it?
Re: flashing red status
Posted: Wed Jan 25, 2012 7:20 pm
by rossbryant1956
Not quite sure how to do that. Looking at manuals now. This will get easier, I'm sure.
Re: flashing red status
Posted: Wed Jan 25, 2012 7:24 pm
by rimai
http://www.reefangel.com/files/ReefAngelInstaller.exe
Download and install.
Then start Arduino and open ReefAngelSimple
Then, click upload
Re: flashing red status
Posted: Wed Jan 25, 2012 7:26 pm
by rossbryant1956
Thx, trouble w internet here at home. Will do so in the morning and post results. Thx.
Re: flashing red status
Posted: Thu Jan 26, 2012 6:21 pm
by rossbryant1956
Studied the manuals, reinstalled sw, followed instructions, opened arduino, can't find anything called reefangelsimple. Pls advise.
Re: flashing red status
Posted: Thu Jan 26, 2012 6:23 pm
by rimai
Click the button Open and you should see ReefAngelSimple
Re: flashing red status
Posted: Thu Jan 26, 2012 6:31 pm
by rossbryant1956
Found it. Worked.
Is there a post somewhere that tells me what all I can do with this and what to do next? Thx all.
Re: flashing red status
Posted: Thu Jan 26, 2012 6:33 pm
by rimai