Reef Angel Forum

Got it worked out. Thanks for the reply.

When changing the wave patterns on the Web page the pump always gets stuck on constant. Also seeing issues with overriding the speed settings as well. My Jebao defaut speed settings are 38% - 42% and I can ramp it down to 28% in pulse mode from the setup wizard. When I change my code from false to t...

pic with D120 off

Blues and moonlights on. I will get another pic uploaded in the morning when the the sunrise and sunset phase starts

Pic of the tank with lights on. The lights are not fully tuned in yet and no final aquascape. Can we see some pics at 10%? Can you get good mix variations despite the 10%? I'm definitely grabbing a pair soon but i need to replace the dimming module I have.. Want to be able to get a nice sunrise/sun...

deputy1234 wrote:

lnevo wrote:These lights are down to $120 on eBay...think I'll be grabbing some soon...

So analog control..cut wires on 1+2 connect splice to dimming exp. and short 3+4? Thats it?

Forgive me as and trying to figure out what mean by short 3+4. Does that mean connect 3+4 wires together?

Thanks.

Yep

Pic of the tank with lights on. The lights are not fully tuned in yet and no final aquascape.

You are correct on the wiring. I used a cat 5 cable. Drilled a hole in the center between the AC plugs put a grommet in the hole ran the wire though, tied a not on the inside of the chassis and wired the leads up to the drivers and used two leads to go to a 12v led moonlight strip I got off Ebay and...

You are correct on the Meanwell drivers. There are some D120's out there with PWM drivers but no confirmation on 0% to 100% dim ranges. I am fine with the 10% I am getting now. I plan on upgrading to the Radion when I get my tax refund in Feb..

Goes no lower that 10%. They are not discontinued. Maybe on the Reef Breeder website. These fixtures are available on Ebay. The Reef Breeders model is no different than the Ebay options other than a couple LED color changes. Plus they were charging $70.00 more than the normal price Evergrow was sell...

The D12 is not resistance dimming. You will need analog dim outputs to make it work. Clip the driver input wires from pins 1 and 2. Solder your analog output leads to the drivers input wires, short pins 3 and 4 and it works great! Fans ramp up and down with the light intensity as well. FYI the drive...

Has anyone experienced there relay expansion module making a loud clicking noise and causing all the devices plugged in to turn of then on by it's self. Seems like there is a constant loop because this happens every couple minutes. The relay expansion is new and installed last night.

Instead of waiting for the auto update from my Mac I installed the software on my PC and was able to push the new code to the controller and issue resolved. Thanks for fixing this issue!

I received my RA today and saved my configuration from the wizard and now my LCD is blank. I tried the fix suggested by Rimai and no luck restoring the LCD. Can anyone assist?