Reef Angel Forum

Hey Rimai, Sorry for the delay, have been quite busy. Seem to have gotten it working on my phone while I am in my network. Couple of weird things are happening though. - My router/modem is putting out 2 networks 'Telstra1B6E' and 'Sherray'. Sherray is our old network from 2 modems/routers ago, so no...

I'll have to check later, but yes certain I am in the same network. No neighbours here so we only have one network avaliable.

rimai wrote:Can you ping the wifi attachment from your computer instead of using the router tools?

Yes all seems in good nick. Also yes it is a RA+

Hi Rimai,

Yes I just checked and it is there:
Also did a ping test which worked:
I'm still having no luck with the ip - http://192.168.0.11/wifi (IE and Chrome)

Not sure what to do, looking forward to hearing your advice.

Thanks in advance
Regards
Cody

Hi Rimai,

No the green LED is the only one blinking (slowly).

Cheers
Cody

You have DHCP false... is your router running DHCP? Otherwise you'll need to set a static IP on the wifi module. Also make sure your router is set for AES-2 I believe and no spaces in the password. Hi Inevo, Sorry for the delay. I just installed another modem/router my internet provider (telstra) s...

Thanks Inevo, I will take a look tomorrow (Australia based)

Can anyone suggest a fix for the above to get it working? Need more info?

Hi, I was having issues with the setup, where the connection would only occasionally work on my home network with a couldn't connect message coming up. I hadn't approached port forwarding. Because of this and the antiquated modem/router I had, I have changed my cable modem to a cg3100D-2 modem/route...

hmmm, that's confusing. I didn't anticipate anything like that. I'll keep tinkering and let you know how I go. Keen to get it working with the app so I can have my tablet display on the wall.

hmmm, that's confusing. I didn't anticipate anything like that. I'll keep tinkering and let you know how I go. Keen to get it working with the app so I can have my tablet display on the wall.

I tried it in IE Firefox and chrome. Also can't seem to get it to connect with the portal. Thoughts? I'm a bit n00b lol

Hey guys,

Setting up my wifi expansion. Is this likely to be a result of bad internet/router? I got it to load and click a couple relays over, but now I'm just getting this. It is placed about 1.5m from a booster.

Thanks Roberto, I think I have it now. Been playing around with my unit a bit.

Is it possible to get one of the small box's that come with the Relay expansion? I have the main box already... would prefer to spend the money on other expansions/attachments.

This is my current stuff from the wizard, could you give an example of what it would look like if I had another relay with the same settings? Or just a few examples. #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #in...

I don't think the wizard can do that, but the code would be the same, except for the port you are using. For example. For the 1st box: ReefAngel.Relay.On(Box1_Port1); And for the 2nd Box: ReefAngel.Relay.On(Box2_Port1); And for the power control: ReefAngel.Relay.On(Box3_Port1); So could I generate ...

rimai wrote:Sure you can
Up to 8 mix/match total

Thanks rimai, how do I get them to display in the wizard so I can program them?

Hi all,

I want to have 2 relays and also be able to have the 12v power control expansion. Is this possible to do with the wizard?

Cheers
Cody

I am making an automatic rotifer culturing system. The reason for using solenoids is so I don't have to listen to peri pumps for extended periods. I will be using salt water compatible ones too. I think I only need 2 floats too. How hard would the following be to achieve? Step 1 - Peristaltic pump p...

nope, but will get one.

Was just looking in the wizard and couldn't figure out how to do it with more than 2 (even when I selected the I/O unit) I'll have another look.

Another quick one.

I am doing a automatic rotifer culturing apparatus atm. The idea is to have 2 containers, one of which has 2 float switches (high and low) and another has 1 (high) am I able to program, with the wizard all 3 switches to control 3 different ports?

thanks

Hey all,

Just got some bits, was wondering how I connect the power control expansion and use the wizard with it? I am wanting to control some 12v solenoids (with a couple float switches) and peri pumps with it.

cheers
Cody

rimai wrote:I don't think it would work with no password

Hey roberto,

The wifi attachment will work if you have no password you just need to put a space in the box.

yeah typed i a random bunch of letters and it did something but obviously didn't work. here comes the next 6 months battling to get one lol

Hi there, With the 2nd type of connection, will it work if there is no passphrase? I am not sure why it would but it does nothing once I click "setup wifi attachment" just leaves black. I have talked to my master (father) and it is all to hard to put one on to try :roll: I am getting to th...

fatman wrote:Not sure on the PAR meter, but you likely have a PWM controller. The analog ones have a sticker on the relay box that says analog. You will only be able to run one pH probe without an expansion module.

Cheers, bugger was hoping for analog as I already have some drivers for it.

Worth noting I got the unit 2nd hand but new.

I got two probes with it.

I presume this is a PH probe, but the other one definitely is too. Will the other probe also work?

Not sure how this Apogee PAR meter hooks in?
Not Sure if I have an analogue or PWM unit? Is there any way to tell?
more questions and pictures coming in next post... damn limits and no photobucket...