I use this (3D printed):
https://www.thingiverse.com/thing:1496379
Search found 1437 matches
- Tue Dec 01, 2020 6:50 am
- Forum: Standard
- Topic: What is everyone using for float valve mounts?
- Replies: 1
- Views: 3487
- Tue Dec 01, 2020 6:38 am
- Forum: How do I code ...
- Topic: Converting ato high to skimmer shutoff?
- Replies: 5
- Views: 5270
Re: Converting ato high to skimmer shutoff?
I use a similar setup with an external skimmate locker (a big water jug with a hose and a float switch). It shuts off the skimmer once the locker is full. It will stay off until you turn the skimmer port back on in the uApp. Code is super simple. if (ReefAngel.LowATO.IsActive()) ReefAngel.Relay.On(S...
- Tue Dec 01, 2020 6:30 am
- Forum: How do I code ...
- Topic: Redundant ATOs
- Replies: 4
- Views: 3121
Re: Redundant ATOs
I use a similar setup with a double float switch. If the bottom one fails, then the top one can still stop the pump.
I just wired the two switches in series and connected them to one port. That way you can just use SingleATOLow (or Hi) and not worry about additional coding.
I just wired the two switches in series and connected them to one port. That way you can just use SingleATOLow (or Hi) and not worry about additional coding.
- Sat Jun 13, 2020 3:40 am
- Forum: Apps
- Topic: Universal App
- Replies: 236
- Views: 266703
Re: Universal App
Enter them into the Portal, then "Download Labels from Portal" in the Uapp menu.How can I get my labels onto the U app?
- Mon Apr 13, 2020 11:59 am
- Forum: Apps
- Topic: Removing Multi Channel Water Level Expansion
- Replies: 2
- Views: 3920
Re: Removing Multi Channel Water Level Expansion
OK, I was wondering if that was the case. Thanks for the reply!
- Mon Apr 13, 2020 3:28 am
- Forum: Apps
- Topic: Removing Multi Channel Water Level Expansion
- Replies: 2
- Views: 3920
Removing Multi Channel Water Level Expansion
I took it off and removed the code, but it still shows in the Uapp. How can I remove the values?
- Fri Apr 03, 2020 3:16 am
- Forum: Standard
- Topic: Cloud down?
- Replies: 2
- Views: 3627
Re: Cloud down?
Working great now. Thanks for the prompt attention.
- Thu Apr 02, 2020 7:39 am
- Forum: Standard
- Topic: Cloud down?
- Replies: 2
- Views: 3627
Cloud down?
Is the cloud down? I can't seem to connect this morning.
- Sun Mar 15, 2020 11:38 am
- Forum: How do I code ...
- Topic: RA Star Port Labels
- Replies: 8
- Views: 8220
Re: RA Star Port Labels
Got it. Thanks!
I also found out the Wizard can do it, if I'd bother to enter in the labels.
I also found out the Wizard can do it, if I'd bother to enter in the labels.
- Mon Mar 09, 2020 5:58 pm
- Forum: How do I code ...
- Topic: RA Star Port Labels
- Replies: 8
- Views: 8220
RA Star Port Labels
Is there a way to change the labels on these?
Thanks,
--Colin
Thanks,
--Colin
- Sun Jan 26, 2020 4:24 pm
- Forum: Apps
- Topic: Android Reef Angel Status
- Replies: 974
- Views: 624774
Re: Android Reef Angel Status
Thanks for continuing to work on this, Curt. It's much appreciated!
--Colin
--Colin
- Sat Feb 24, 2018 10:49 am
- Forum: Portal
- Topic: Our DDNS service
- Replies: 42
- Views: 120842
Re: Our DDNS service
That would explain it! I'm up and running on no-ip, so it's not a big deal right now.
Thanks!
Thanks!
- Sat Feb 24, 2018 5:34 am
- Forum: Portal
- Topic: Our DDNS service
- Replies: 42
- Views: 120842
Re: Our DDNS service
I've been having trouble with this for several days now. I'm unable to get a connection using myreefangel.com through Curt's app. Error 13 failed to connect, but it shows the wrong IP address. My no-ip address works fine, as does the portal. Has the myreefangel.com stopped updating for me?
- Wed Nov 08, 2017 4:53 am
- Forum: How do I code ...
- Topic: Cloud and Lightning Code for Dimming Expansion
- Replies: 106
- Views: 232898
- Wed Nov 08, 2017 4:49 am
- Forum: How do I code ...
- Topic: Cloud and Lightning Code for Dimming Expansion
- Replies: 106
- Views: 232898
Re: Cloud and Lightning Code for Dimming Expansion
This is wrong.cosmith71 wrote:It should mean only changing this line.
I haven't done much with the Star, but it should be possible. Give me a couple of days to look it up, unless someone else knows the function off the top of their head.Code: Select all
ReefAngel.PWM.SetChannelRaw(1,DaylightPWMValue);
- Tue Nov 07, 2017 4:49 am
- Forum: How do I code ...
- Topic: Cloud and Lightning Code for Dimming Expansion
- Replies: 106
- Views: 232898
Re: Cloud and Lightning Code for Dimming Expansion
It should mean only changing this line.
I haven't done much with the Star, but it should be possible. Give me a couple of days to look it up, unless someone else knows the function off the top of their head.
Code: Select all
ReefAngel.PWM.SetChannelRaw(1,DaylightPWMValue);
- Wed Sep 13, 2017 3:01 am
- Forum: Standard
- Topic: Thank You to the Reef Angel community!
- Replies: 1
- Views: 3108
Re: Thank You to the Reef Angel community!
I've been there with the lightning strike. Good luck!
- Tue Sep 05, 2017 4:04 am
- Forum: Standard
- Topic: Reef Angel Star Controller
- Replies: 116
- Views: 96400
Re: Reef Angel Star Controller
It's the RJ-45 port on the bottom. Next to the leak detector which is a smaller RJ port (6pin vs 8pin). There is a picture of it in the manual and the pin-out. Understood. But where do I get this connector?? Any special tool required?? It's an ethernet connector. Just cut the end off of an ethernet...
- Thu Aug 31, 2017 4:03 am
- Forum: Ask anything here
- Topic: DIY Temp probe
- Replies: 3
- Views: 5405
Re: DIY Temp probe
You might have the red and yellow wires reversed.
- Mon Aug 21, 2017 3:45 am
- Forum: How do I code ...
- Topic: Coding help...
- Replies: 1
- Views: 3619
Re: Coding help...
Use a float.
https://www.arduino.cc/en/Reference/Float
Alternatively, if you don't need a variable, just change the number in the Sl.Init to whatever location you like.
Code: Select all
float variablename = 123.4567
Alternatively, if you don't need a variable, just change the number in the Sl.Init to whatever location you like.
- Sun Aug 06, 2017 4:39 am
- Forum: Standard
- Topic: Reef Angel Star Controller
- Replies: 116
- Views: 96400
Re: Reef Angel Star Controller
Ah, good stuff!
- Sat Aug 05, 2017 3:04 pm
- Forum: Standard
- Topic: Reef Angel Star Controller
- Replies: 116
- Views: 96400
Re: Reef Angel Star Controller
What is this screen?
- Sat Aug 05, 2017 6:05 am
- Forum: Standard
- Topic: Reef Angel Star Controller
- Replies: 116
- Views: 96400
Re: Reef Angel Star Controller
What does it come with?
Nevermind, I see it's on the products page now.
Package Contents
Head Unit
Universal Relay Box Expansion
SD Card
3x Temperature probes
pH probe
pH 7.0 and pH 10.0 calibration fluids
2x float switches
Probe bracket
Ethernet cable
Power adapter
USB cable
Nevermind, I see it's on the products page now.
Package Contents
Head Unit
Universal Relay Box Expansion
SD Card
3x Temperature probes
pH probe
pH 7.0 and pH 10.0 calibration fluids
2x float switches
Probe bracket
Ethernet cable
Power adapter
USB cable
- Fri Apr 28, 2017 3:04 am
- Forum: Development Libraries
- Topic: Reef Angel and Latest Arduino similtaneous installation
- Replies: 3
- Views: 5180
Re: Reef Angel and Latest Arduino similtaneous installation
I ended up uninstalling the RA Arduino and just running the Web Wizard for RA and Arduino for my 3D printer.
- Wed Apr 26, 2017 5:04 am
- Forum: How do I code ...
- Topic: Where are the variables defined for the "memory" option?
- Replies: 10
- Views: 9818
Re: Where are the variables defined for the "memory" option?
They are in Globals.h in the libraries. If you have the Android app you can use that to get the memory locations for individual items as well.. They start at 200. There are mnemonics for most of these too, but I don't know the location off the top of my head. Roberto may know off the top of his head...
- Wed Apr 26, 2017 2:44 am
- Forum: How do I code ...
- Topic: Where are the variables defined for the "memory" option?
- Replies: 10
- Views: 9818
Re: Where are the variables defined for the "memory" option?
You'll need to do something like this. I think memory locations 100-199 are available to use. Bytes, take 1 location, ints take 2, floats take 4. In globals: // Memory locations for adjusting dosing amounts. #define Mem_B_AlkDosage 100 #define Mem_B_CalDosage 101 #define Mem_B_Doses 102 #define Mem_...
- Tue Mar 21, 2017 4:00 am
- Forum: How do I code ...
- Topic: auto feed code not working.
- Replies: 3
- Views: 3973
Re: auto feed code not working.
Try changing this line:
to something like this.
--Colin
Code: Select all
if ((now()%SECS_PER_DAY==61200)) //if it is 5 pm
Code: Select all
if (hour()==17 && minute()==0 && second() <= 2)
- Sun Mar 19, 2017 12:49 pm
- Forum: Ask anything here
- Topic: Chinese Led Dimming
- Replies: 5
- Views: 5616
Re: Chinese Led Dimming
Take off the cover. The newer one has jumpers to select 5 or 10v and analog or PWM for each channel.
- Sat Mar 18, 2017 1:38 pm
- Forum: Ask anything here
- Topic: Chinese Led Dimming
- Replies: 5
- Views: 5616
Re: Chinese Led Dimming
Look on the bottom of your relay box. I believe on the analog versions there is a sticker of some kind denoting this. PWM boxes have no sticker.
Newer dimming expansion modules are switchable between analog and PWM, 5 and 10v for each of the 6 outputs.
Newer dimming expansion modules are switchable between analog and PWM, 5 and 10v for each of the 6 outputs.
- Thu Mar 09, 2017 9:30 am
- Forum: Addons
- Topic: Dimming Expansion question.
- Replies: 8
- Views: 6439
Re: Dimming Expansion question.
I believe so. Roberto will know for sure.