Reef Angel Forum

There is no version that I can see. Booster is shown in bottom right corner.
This is the booster I have.
Thanks.

I have old relay box and I have 0-10 PWM booster. Is there an easy way to make it 0-10 Analog? Maybe a simple replacement of the 0-10 PWM booster to 0-10 Analog booster&converter? Or something that can be put past RA controller to smooth signal to analog before it reaches drivers? My SB Reef bas...

I'm confused. PWM ports are sending PWM signals at 0-5V. This is good for PWM dimming. If RA has a PWM booster I can get 0-10V. To feed analog dimming drivers, right? I can get different output from RA on those ports. Almost anything between 0V and 10V. Is 7V from RA ports different from 7V on other...

I've been using RA to control my ELN 60-48D drivers for long time, but I never got them to work correctly. This time I took my lights apart and trying to make them dim using PWM output. It looks like RA sends some strange output from PWM that drivers do not work well. Let me explain. I set PWM outpu...

Ok. Need memory. I cleaned up what I think I could. Any ideas what I can change to minimize footprint? #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_No...

There are two options in this post http://forum.reefangel.com/viewtopic.php?f=2&t=76

Mine works so far. Can't complain much for the price.

Thanks Roberto.
I'll give it a try. I guess I will do some adjustments to use more new features once it is loaded.

I might have memory issues. Looks like upgrade to RA+ is coming

I spent some time today installing everything that is required to use v0.9 and was trying to get my PDE converted to INO. The part with include files was easy, but I'm not sure where to go next. I have PDE with custom screen and simple menu. I'd like to keep screen but menu can change if it is simpl...

Does this work with WiFi Authentication? I saw some posts about issues, but not sure if that was resolved. I was testing app inside the house with local IP and it works. But I want to be able to access controller from anywhere using phone (android). Before setting up router to handle redirect I adde...

Does this work with WiFi Authentication? I was testing app inside the house with local IP and it works. But I want to be able to access controller from anywhere using phone. Before setting up router to handle redirect I added security to controler I'm able to use access by 192.168.1.100:2000/wifi an...

p13.png p14.png p15.png I should say that it's not the best mount I could imagine, but it does the trick. You have to remove bumps for better fit. I also removed one padding on each side of the mount. But it is not half bad for $5 delivered. You can try to use suction mount, but I did not see any g...

Mounting to the door using double sided tape. To be cont...

Now it fits better: To be cont...

Those bumps must go: To be cont...

It took some time to get this holder. Then I went for a short vacation... Anyway, I'm ready to share some pictures. There are two raised parts at the bottom of the holder that prevent controller from mounting flat (circled with red). To be cont...

I ordered this http://www.dealextreme.com/p/universal- ... lack-81053
looks like it can work. will post results when I get it.

Do you see the difference between 100% and 90%? I adjusted drivers and still do not see visual difference in LED output after 30%. I checked PWM output from RA Controller. It ranges from 0 to about 9.7 V (0-100%). I set drivers to output 750mA at 100% PWM. I will try to check driver output on 10% PW...

Nothing is used, just output from RA controller.

I'm currently running Meanwell D drivers from RA controller. They do work. But this is somehting I noticed. My LED light start at 2% of PWM output. I can see gradual difference as PWM output increases up to 20% but anything past that I can't tell any difference in light output. Not sure if this is h...

Glad I could help
Thanks for information.

I was trying to fix my issue with wify and updated libs to latest code. It fixed wify, but now I see "Error" in stead of "0" on my display. I can undersnat it for temp (I only have one probe now). But it also shows "Error" if PWM is down to 0. Is it by design? What shou...

Ok. Getting better but still can't figure out. After new code using new libs installed I did not get email. I cleared ATO on controller. Triggered ATO three times and got 2 emails. Cleared ATO. Triggered ATO 3 times, got only one email. Cleared ATO. Triggered ATO 4 times, only 3 emails. To clarify, ...

Thank you. This is a very nice tool. I reinstalled all libs from scratch. Loaded code. It looks like wifi is not going crazy now. Trying to figure out emails. I triggered ATO Hight several times with no email. Then I was playing with ATO Low for couple of seconds and triggered ATO High again. This t...

I'm using v0.8.5.16 dev libraries.
Was fix there or in standard?

Thanks.

Something strange is going on with my setup. Loaded code with email notification for ATOHight only: if (ReefAngel.HighATO.IsActive()) WifiSendAlert(7,true); else WifiSendAlert(7,false); I reset wifi and loaded everything fresh on it. I tested wifi by loading code and got temperature readings in term...

Sure. Sorry I did not do it before: Code: // RAMenus.pde // // This version designed for v0.8.5 Beta 10 and later #include <ReefAngel_Features.h> #include <ReefAngel_Globals.h> #include <ReefAngel_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <ReefA...

Hey guys. I'm trying to implement messagin from controller via email using wifi module. I can't tell it dows not work, but in some cases i'm not getting email whenI should. I have LowATO set to turn pump on and off. HightATO suppose to tell me when water level in fresh container is low. I used code ...

Ok. Will try that. Thanks for explanation!

is there a way to control 2 led lights from the client? looks like I can set pwm% for white and blue, but I do not see the way to control On and Off timers for them. There is a setting for my lights' but I don't have it. The only way I see now is to change code and upload to controller every time I ...

Looks like I fixed it.
I extracted all library files from RAGen installation and replaced files that I had before. Looks like this resolved the issue.

Sorry for false alarm.