Reef Angel Forum

watchdog enable, second ATO sensor removed. Still have blak screen every 2-3 days... the RA controller stop working...at midnight white light are still on... i have to suht down ad restart... then everything start working again. At today i have removed heating and cooling (this "crash" cau...

rimai wrote:Try enabling WDT when you generate the PDE.
On RAGen, make sure that WDT is checked on the features tab.

It is not checked, the "watch dog". You think is it the problem?

Now the RA is on black screen and still working with light on in night time...

Ok. Here it is: // Autogenerated file by RAGen (v1.1.0.126), (01/15/2012 16:34) // RA_011512_1634.pde // // This version designed for v0.8.5 Beta 17 or later /* The following features are enabled for this PDE File: #define DisplayImages #define DateTimeSetup #define ATOSetup #define MetalHalideSetup...

rimai wrote:I don't think this is it.
This is an internal memory file

Where i find it?

I've problem since two week with RA. I'm monitoring two level woth two probe. The first probe show the sump water level and contro refill pump (60 sec time out). The second probe show the re-fill tank water level and the refill pump (timeout disable). When the ATO High (second probe) turn on, some t...

I'm using two ATO to contro two different water level.


Menatime I've solved the probem: i have found the flag to disable ATO time out.

Just one more question about the ATO setting... I'm using two sensor: 1) sump water level, with on/off on re-fill pump 2) re-fill water tank, that should turn on a red ligh to inform me that osmotic water is nearly finished. My problem is that I've not understand how to remove the ATO time-out on th...

Done, now time work correctly. Now, the next problem: if i set °c display, the temperature don't work. I think the problem is the same, as long as i can set on/on point only in °f (also if i'm using °c). InternalMemory.HeaterTempOn_write(761); InternalMemory.HeaterTempOff_write(770); InternalMemory....

This is arduino code of internal memory: void setup() { e.lcd_init(); e.lcd_clear(COLOR_WHITE,0,0,132,132); e.lcd_BacklightOn(); InternalMemory.MHOnHour_write(1); InternalMemory.MHOnMinute_write(0); InternalMemory.MHOffHour_write(11); InternalMemory.MHOffMinute_write(0); InternalMemory.MHDelay_write...

I've try tu use the RA client, no AM/PM value shown...

There is any other way to change time manually somewhere, otherwise i cannot install the Ra... You can always use the RAStatusApp that is a java application to manually set the times on the controller once the PDE file is loaded. http://forum.reefangel.com/viewtopic.php?f=8&t=246 curt Downloade...

There is any other way to change time manually somewhere, otherwise i cannot install the Ra...

Same problem on RAGen-v1.0.0.zip — v1.0.0 - Initial Release

What is this? Should i install also this one?
vcredist_x86.exe — Microsoft Visual C++ 2005 Redistributable Libraries - required to run RAGen.

I've try to install few version on different pc pc, again am/pm is not shown.

RAGen version: RAGen-v110-v08519 Installer - NO AM/PM
65 downloads RAGen-v104-v08517 Installer - NO AM/PM

System on all pc: XP

, maybe I'm making some big mistake, but i don't see any am/pm value:




I'm using some wrong version or else?

wolfador wrote:use 24/hr time.

How/where i set 24h time with RAGen?

EDIT:

I set lights on at 11.00 and iff at 10.00, there is no AM/PM setting.
On RA controllor is shown 11.10 PM and light are still running...

Here again, not yet able to install the controller. I've programmed with RA generator as follow: Port 1 Standard light Port 3 Standard ligh Port 5 Nigh light (how i set them?) Port 7 Night light (how i set them?) Port 6 Chiller Port 8 Heater Port 4 ATO Port 2 - Free- I've following problem: 1) I wan...

Yes, just the first one (sketch) path is indicated as "t"... I've upload the first configuration, i will test it tonight.

Installed everythig, but when i go to controller/Internal Memory - Generate it give error message, "unable to generate PDE files". If i check "find controller" option, i found the controller correctly. EDIT I go on setting and note that "sketch" folder is only "t&q...

I've installe the ra controller and made this "european-plug box": http://img848.imageshack.us/img848/381/img0503k.jpg Here the complete review (Italian): http://www.acquariofilia.biz/showthread.php?t=337359 I've already installed the ReefAngelInstaller software and made the programming te...

EDIT:

The problem seems to be AM-PM setting.

Today, 12.30 PM, if i set dawn 11.00 AM and dusk 01.00 AM the led shut off.
If i set dawn 11.00 AM and dusk 11.00PM they turn on.

Hi, i've just received RA controller here, in italy, and started to install it. I've purchesed also new RA led moonlight. I install the led to the actnic pmw output and set up dawn-dusk time (DEMO software). The led turn on, but with "flashing" effect. To stop it i put the pmw power up to ...