Reef Angel Forum

I played around with it some more and reset the unit and I was able to get it to start working, odd.

On a separate note, the Iphone app does not have the dosing pump controls in the memory section. Is there any way we can get that added?

Thanks, Curt. Luckily, that is not a problem for me as I don't use the wavemaker functions.

However, the dosing pumps code is currently in my file but I still cannot control when the dosing pumps turn on from the memory tab in client suite.

Ok. What do I need to add besides the following:

ReefAngel.DosingPump1(Port5);
ReefAngel.DosingPump2(Port6);

Thanks!

The memory tab on the Client Suite has a place to input the controls for the dosing pumps. Time to turn on, how long to run, and how often to turn on.

Originally, I had manually programmed a code to run the dosing pumps but decided to change and try and run them from the Client Suite, but this has not worked. I am able to turn them on and off from the Iphone app, so I know they can be controlled remotely. Not sure what I am missing? I only changed...

Problem fixed.

Roberto remotely logged in and figured out the problem. While I had the airport set up to forward properly, I never forwarded the Uverse router that it was connected to. Once we forwarded that, everything worked like a champ.

Thanks again Roberto.

Anyone else have any ideas?

Computer every time

Thanks for posting that John. My port forwarding is set up the same as John's. I have checked my external IP address the last few days and it has stayed the same. However, I cannot connect through my iphone of through http://99.67.237.227:2000/wifi. I can connect through 10.0.1.2:2000 wifi. Is it po...

Ok, that step is done and it is still not working.

Any other suggestions?

John, can you show me screenshots of your configuration to make sure I am not missing anything. Do I need to mess with IPv6?

I used port mapping to open port 2000 for 10.0.1.2.

I still does not seem as though the port is forwarding. When I try to connect to 10.0.1.2 from the iphone app, it only works when I have it connected to my home wireless. Is there another IP address I should be connecting to?

Ok. Now that is complete. So now should I modify the port forwarding to the ip address that is assigned to the RA?

It moved to 10.0.1.2. That is the address I then reserved it too.

Thanks for the help everyone. I can see the mac addresses of the devices connected. There are 5, is there a way to tell which belongs to the RA? As far as configuring a static IP, I think I did that incorrectly. I configured it on my PC laptop for the laptop. I having been working mainly from other ...

I cannot log into the server through that address either. Perhaps there is some issue with the router?

I can get into the router through the airport utility application.

Pardon my ignorance, but how do I do that?

I thought that would be the case. I just disabled the port forwarding but am still not apply to see web server and the client is not connecting. Now I am really not sure what is going on.

I have always been able to view it using 10.0.1.5:2000/wifi; however, I cannot now. The page just continues trying to connect, and eventually says the connection is taking too long. The same happens when I use the external IP.

Ok, so I moved the IP address in the port forwarding window to 10.0.1.5, which is the wifi attachment. Now I cannot connect to the controller through the client suite or anything else. The wifi adapter still shows the slow blinking light, so I assume it is connected. Not sure what the problem is now...

I am trying to set up the port forwarding on my airport extreme router and having some difficulties. I will start this by saying I am not overly computer savvy, so I am sure this is an ID ten T error. I have set up a static IP address on the old PC laptop I plan to use. That address is 10.0.1.150. I...

Thank you both

I only want the dosing pump to turn on one time a day for one second--to dose vodka while I am out of town. I am still new to coding, so want to make sure this code will accomplish that? if (hour()==09 && minute()==0 && second()==1) //Alk Doser - Only works if Main screen is showing ...