Reef Angel Forum

Recently (as in yesterday) the time on my 3 year old RA+ started randomly changing time. It'll be 10am one minute, and suddenly change to 4pm. Its done this 3x today. I tried cycling power, and that didn't fix the issue. My wifi attachment has been unplugged for the past 3 months, so I know its not ...

I went to update my RA+ today and its now stuck at an "Memory Updated- You can now upload your INO code" screen. I even tried redoing everything via the wizard, but I'm still stuck at the same screen. HALP! Code: #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #in...

Awesome. Thanks a lot!

Ideally I'd love for the ato to run 2x an hour.

I'm trying to use the SingleATO function "SingleATO(true,Box1_Port3,300,1)" but I'm getting the following error: "SingleATO not declared in this scope." Where does one declare it? Or better yet, is there a way to make RA wait a couple seconds when the ATO switch is toggled just t...

Hmm.. Will there be an option to just run a 12v wall wart for charging instead of the panel?

I'm looking for an ATO based trigger for determination of what pump to use for the ATO based PH... Again, I'm not a coder but I'm interepting the code as Port 7 is always on as long as PH is below 8.2? If that is the case, I will need it to shut off based upon the switch to avoid the great flood. :)...

I have a young tank that isn't consuming a ton of Calc or really dropping my PH too badly, so for the time being I'd like it to run the ATO through the KalkReactor only if the PH is below 8.2. I am far from a coder, and was wondering if anyone had something I can borrow from? Logic tree: If Ato.Low ...

It shows a 0 and I've reseated it multiple times.

I2CScanner ready! starting scanning of I2C bus from 1 to 128... addr: 1 addr: 2 addr: 3 addr: 4 addr: 5 addr: 6 addr: 7 addr: 8 addr: 9 addr: A addr: B addr: C addr: D addr: E addr: F addr: 10 addr: 11 addr: 12 addr: 13 addr: 14 addr: 15 addr: 16 addr: 17 addr: 18 addr: 19 addr: 1A addr: 1B addr: 1C...

LED on both the wall wart and the Module are on. Tried reseating both the probe cable and the USB cable as well as trying different ports in the expansion hub.

...While I was working on the tank this evening, so I probably did something. I tried reseating everything to no avail. How can I tell if it's the probe or the module that's giving me trouble?

Yeah. Swapped out the cable with another one I had. Seems to have fixed the problem.

It was a bad USB cable. Only did it when it was bent in a certain direction.

I haven't tried the port swap-a-roo on the hub yet. I will do that next. I also have the PH and Salinity Expansions. The only cable I can see as potentially being bad is the cable from the RA to the Expansion Hub. Otherwise the other cable combinations work fine as long as they're attached directly ...

Just finished testing by swapping relay boxes and the other one exhibited the same behavior when plugged into the relay expansion while it is plugged into the expansion hub.

Yeah, but I won't be able to do that for a couple days. With that said, I've definitely narrowed it down to only when it's plugged in to the expansion hub. It would be easier for me to eliminate that as a possible cause just because of my cable management. Can I try it with a regular USB hub?

I have an issue where the relay box that's plugged into my relay expansion. When the relay expansion is plugged into the hub it will randomly make a loud clicking noise and drop power to all ports on the attached relay box for a split second. It will do this multiple times in an hour. If I plug the ...