Reef Angel Forum

Ok, I reprogrammed and now my Rf is blue in short pulse mode and the Vortech is white with no speed movement….just the first blue light is one. Is that normal?

Once connected and programmed, the RF Expansion unit shows purple for Nutrient Transit Mode but the Vortech is green. Is the Vortech controller supposed to reflect the same mode that the RF Expansion is showing or do you ignore the Vortech controller's colors all together?

Roberto, you are the man. Thanks

I have one Vortech MP40w on my 90 gallon tank. I just want NTM setting from 9a-9p and then Night Mode from 9p-9a. Any code help would be greatly appreciated. Thanks in advance.

Picked up some jumpers from my job and my relay expansion box is up and running. Thanks for the help.

Checked main unit and there was only one jumper. (All three jumpers must be installed in head unit in order for any expansions to be recognized)

I have swapped cables and boxes and they work but when I hook up the relay expansion, the green light is on but sockets on the box have no power. Here are my readings from the I2CScanner I2CScanner ready! starting scanning of I2C bus from 1 to 128... addr: 1 addr: 2 addr: 3 addr: 4 addr: 5 addr: 6 a...

I tried different dip switch settings and the additional relay box still has no power.

Ok, I'll change my dip switches on the expansion end and see what happens.

Dip switches all off and Reef Angel unit was purchased March 12, 2012. Just received expansion on Friday.

I connected my 1st relay expansion box by the manual. All codes were accepted and the 2nd set of 8 channels show up on the Reef Angle screen but no power is coming from the box itself. I set it for all 8 to be "always on" and all lights are green but still no power when I plug something in...