Reef Angel Forum

Lift this old thread. I cant remember how I get it done last time. Is this correct? If I the doser should be off at night? Is it ok to place it in the loop or should it be in custom? if (hour() > 8 && hour() < 22) ReefAngel.DosingPumpRepeat( Box1_Port1,0,360,6 ); Thanks for all help :)

Thank you. I will try this

Planing to use this code but wonder if its possible to do this twice a day with differnt times? And if it is possible to just slow down the pumps that are controlled by the dimming ports? For example during feeding the pumps just work on 20% for 15 minutes?

Have done that like in the mannual. All off for no 1 and on off off for no 2

Does not get the 12 volts relay box to work together with the 220 volts relay expansion. When I plug in a 220 volt relay box as box 1 and 12 volt as box 2, the 12 volt box does not work. If I take away the 220 volt box. the 12 volts box works as box 1. It will not work if the 12 volts are nr 1 and 2...

Trying to pair a waveline dc pump to control with ra. The cables at the top of the image are from the waveline pump. The cables down the picture are reef angels cable for jebao pumps. How should these be connected to work? What color from waveline is plus, minus and control? http://forumbilder.se/H6...

Its working
The only thing is that the expansion begins the relay with 11 not 9 in the display, but the code i correct.

Yes, but I have found out that the relay expansion is broken so Im gonna replace it with the power controller for all 12 volts.

Would this work for control the orp exp with powe control exp, if I place it in the loop? Do I need to upload the CustomMainScreen_PowerControlExpansion file to reef angel like in the manual? if (ReefAngel.Params.ORP >= 400 ) ReefAngel.Relay.Off(Box1_Port3); if (ReefAngel.Params.ORP <= 350 ) ReefAng...

Has now pulled out all the cables one by one. Last I did where to turn off the relay box and then the bus lock disappeared. Must be the one who is broken then? Is it just throwing and buying new or is it possible to fix it?

So just copy & paste then change box number. Thank u

Ok. Even if I only use the power control? Where could I fimd the code for it?

When i shut of the relay box bus lock dissapear. Have take it apart to check if there was any dirt on usb but i could not see anything strange.

I'm getting bus locks on my relay expansion and wonder if I can repair it in some way and how?

How do I set up those two together? Is it possible in the reef angel wizzard? There is only relay exp in the list.
I didnt understand the manual for this expansion.
Is it possible to switch on and of individually outputs on this expansion

No it says closed for both ip number. But i have the port open

yes it does. Does it mean that the port is open? What should i do to make the connection work?

I have trried to do this in the link but still dont work. Its impossible to connect to the portal. And have done port foreward in my router. One strange thing is that when i put in my ip on the portal setting is that it changes to another number as soon as i log off and log in it has changed again?

Is it possible to add a delay for a couple of hours after the float swich has become active? The reason is that the float swtich stands and bumps a bit in when it is on the edge of unloading witch causing my solenoid to open and close many time before it stands open and fill up water. Im running on ...

Having problem with this. Cant get the wifi to work. This is my file i have used in teraterm: x=0 while x<>121 messagebox 'Start WiFly module configuration' 'Webscan Config Program' ;this macro all sent with 5 msec character delay timeout=10 send '$$$' wait 'CMD' sendln 'factory RESET' wait 'Set Fac...

ok thanks but i dont understand. What is ssid och passphrase?

I dont know. Buyed it used. How do i update it? Its the old wifi

Hi

I have problem with connection to portal.

I have done the installation and port forwarding but still its not working?

http://www.reefcentral.com/forums/showt ... ?t=2617260

Found this thread about controlling jebao.

https://www.marinedepot.com/Waveline_DC ... AD-vi.html

Maybe this one?

So jebao / jecod dont uses pwm or analog? Its possible to controll the jebao wp streampump as far i know. Does all pumps with pwm / analog to control?

maybe speed wave and waveline are controllable. I havent order a return pump yet because I wanna have a controllable

ok, why not anymore? I wanna do like this in the video https://www.youtube.com/watch?v=r15TTX-KHZw

which return pumps can be controlled with reefangel. Have searched a little but find nothing special

Which return pumps could be controlled by ra?