Reef Angel Forum

it comes up "autogenerated does not name a type"
after powering it down for 3 hours the screen has now come back and the red light is off,but we need to resolve the issue before i risk my livestock,im away from the tank 10 hours a day and cant risk unreliable equipment
you have a pm

the red light blinks 4 times then goes on,no i cant upload anything,also no power at the relay box outlets

nothing it comes back on frozen red light on

i was going to fit up the RA today has been running faultless on the table, but the screen has frozen half blank and no power at the pwm sockets ,red light is on,help please,have powered it up and down several times,joystick does nothing

rimai wrote:That's very nice
Can I have their contact info?

yes put them in the store

your a ledgend Roberto that loaded up ok and i have 9.6v at each pwm port, thanks))))

ive tried this but still get expected ,)' before token error // Autogenerated file by RAGen (v1.2.1.158), (03/07/2012 14:56) // RA_030712_1456.ino // // This version designed for v0.9.0 or later /* The following features are enabled for this File: #define DisplayImages #define DateTimeSetup #define ...

ive now downloaded the internal memory and got the controllerdoing what i want via ragen,im just having trouble putting the pwm slope in my pde canyou tell me anything i need to change and where to paste it / Autogenerated file by RAGen (v1.2.1.158), (03/07/2012 14:56) // RA_030712_1456.ino // // Th...

ive switched from port 3 to 5 and this seems to have fixed the problem,but i cant load a pwm slope it comes up pwmslope not defined and a couple of other messages,where exactly in the pde do i paste it?



ps just fyi the international plug adapters dont fit Australian plugs

probably a stupid question but how do you get the ra out of demo mode,got mine today and whatever i do it just sits there clicking relays on and off,have tried re assinging all the ports on but no luck,have also tried putting in a pwm slope but comes up with a failiure message,also red status light ...

thats great Roberto when my RA arrives ill paste it in,its a nice basic code that others can use or modify,us noobs arnt into clouds and thunderstorms yet

a question on the code Roberto posted, on the 15,100,15, part what is stopping this from ramping up and down in a millisecond? what part of the code would give for example a 10minute pause at each figure or a half hour dawn and dusk The function works by minutes and not milliseconds. I'm not so sur...

a question on the code Roberto posted, on the 15,100,15, part what is stopping this from ramping up and down in a millisecond? what part of the code would give for example a 10minute pause at each figure or a half hour dawn and dusk

anyone designed a nice custom holder or modified something to hold the head unit? i dont want to use velcro if i can help it

fantastic!

thanks,just a further question the "15" and "100" in the code are they the percentage of pwm ? if so i can change the 15 to 20 or 25 so the lights start brighter?

thanks for that Curt,are you able to post up a code i can copy and paste,lights ramping up at 8.30 am and down at 8.30 pm using the pwm outlets only
thanks

im ordering a reef angel controller shortly and have a few very basic questions does the pwm cable connect to the blue and white dimmer wires? if the dimmers are set at 0% are the drivers off even though mains power is stll on? is there a basic dawn/dusk on/off program in RAgen? and finally will the...