Reef Angel Forum

Thanks Curt! That solved the problem with the labels. Awesome stuff!


Sent from my iPhone using Tapatalk

Unfortunately that didn’t work. Changed the four N/A for TBD but still nothing in the app


Sent from my iPhone using Tapatalk

Will try that Roberto, although it works well with the U App in my iPhone, it downloads well there


Sent from my iPhone using Tapatalk

Couldn’t make it work. Tried in 2 tablets, and tried using my phone’s internet connection. Interestingly when I change my portal ID to something fictitious I get the message that labels were downloaded. When I go back to my username it doesn’t say anything.


Sent from my iPhone using Tapatalk

Curt, thanks for this! One question. I am having trouble downloading the labels. Not sure what is happening. Anything I can do?


Sent from my iPhone using Tapatalk

Thanks!


Sent from my iPhone using Tapatalk

Thanks guys. This is a bit foreign. Lee, let me see if I understand. Variables 165 and 167 are the ones that control the ph high and ph low.
The code I should have in the loop section is:
PHControl(Solenoid, true)


Sent from my iPhone using Tapatalk

I still need help. That didn't work either. How is the coding so I use the ph expansion probe for the PH Control?


Sent from my iPhone using Tapatalk

Maybe I am answering my own questions, but should I be using PHControl instead of CO2Control?


Sent from my iPhone using Tapatalk

This may be an easy one, but I can't get the ph control to work to control the solenoid in my ca reactor. I have a PH Exp with the probe in the reactor. I use the following code: ReefAngel.CO2Control(Solenoid); And in the internal memory I have 7.0 as High and 6.6 as low. My PH is below 6.6 and the ...

Thanks Roberto. I guess the Apex guys will experience this problem then.
The ultrasonic ones are expensive indeed! Have you tried one? Would you recommend any one in particular?



Sent from my iPhone using Tapatalk

These seem pretty interesting if they work and can be integrated into RA. Roberto, have you tried them by any chance? http://www.ebay.com/itm/G1-Water-Flow-Hall-Effect-Sensor-Switch-Flow-Meter-Flowmeter-Counter-1-60L-min/261195217140?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3...

2 quick questions: - Will the reef octopus return pumps work with the jebao cables? Seem to, but not sure if anyone tested this. - Has anyone been able to get a flow meter working with RA? Now that the apex has one, I would be keen on having one for my setup. I know some people tried, but it has bee...

I found out what it was. It seems that the cable connecting the RA to the wifi unit is the problem. Replaced that with the one for the BT unit and it is working again.


Sent from my iPhone using Tapatalk

Thanks a lot Lee, I will give those a try


Sent from my iPhone using Tapatalk

I am having some problems since yesterday when I was adding a relay and the PH Expansion. The App would say "Unable to process controller data!". Anybody knows what could be happening? Tried with a new version of the ino, also tried unplugging some expansions, and nothing. Thanks Sent from...

Thanks Lee. I was thinking the same thing. Have you found a reliable solenoid you would recommend?


Sent from my iPhone using Tapatalk

I am trying to find a solenoid valve that I can use with my RA. I have an AWC system that pumps water from the sump out of the house through airline tubing. I am planning on putting a calcium reactor and want to use the same line out to feed the reactor (since I only have 4 airlines going through th...

Tried some more today. I can't get the pumps to sync. I get the blue and red light all the time (error) even when the RF module is a couple of inches away. I tried at least 5 times in each of the 2 MP40 pumps. What can I do?

Alex, how did you make it work at the end? I updated the firmware in the RF (thanks for the tips), but still had some problems with the vortechs (I used Vortech Setup to pair them, but they seemed to have lost the pairing immediately). I unplugged my ReefLink to make sure that is not in the middle. ...

Thanks Roberto, got it to work (reinstalled the reef angel installer and used another com). Got that working, but struggled tonight to make the Vortech sync (got them to sync in theory, but then did not turn white). Will try some more tomorrow.

hadnt taken it out before, i have now. however, i get the same message

Can it be that I am running windows 8? I had to add the libusb0 file

Thanks Alex. I cant make it work, though. I get this, and the RF light doesnt blink in the process (it does when I first connect it). Is there a way to check if this updated? Thanks! C:\Users\Downloads\RF_Update_New_Radion>avrdude -Cavrdude.conf -v -patme ga328p -carduino -P\\.\COM1 -b115200 -D -Ufl...

Hi everybody. I want to send a wifi alert when my AWC starts and when it finishes, and have been trying to adjust what I have seen others do to fit the bill. When it starts, I want it to tell me the time, and the WL. When it moves from taking out water to taking in, I want it to tell me the time and...

Can we expect to see an update to the iPhone U-app? Still have version 1.0.2 and would love to have AI or Radion control

Thanks Lee. I also realizes that y needed to use long and not int for the tiempo variable, so that it could record the full now(). I split the info into 2 variables, one for min and one for seconds. That should work for now and I still have unused custom variables. I may not need to monitor this as ...

Hi, I am trying to log the number of seconds that my ATO, and my dosing pumps are on, and then show them as custom variables. For the ATO, I am trying to get this to be cummulative for a day, and record the last 3 days (3 variables). Basically every midnight it should store that day's number into a ...

Thanks! I will test this tonight and come back if I have any issues

Thanks Roberto. That is very similar to the code I have for the pumps. I am not sure what happens with the Radions in the priods of time where you have "ReefAngel.RF.UseMemory=false" When I added the line: ReefAngel.RF.SetChannel I get the following error when compiling "error: statem...

I thought that maybe you could change the value of the variable in the memory, that way you are still using the memory but can start different modes at different times. Is that it?