Reef Angel Forum

i got the board off, took more force than anticipated. Multiple of the sockets have very bent copper plates and some even had loose connectors. Is there any way to get replacement sockets?

Hello- I am thinking about updating to the RA*. I purchased a RANET relay a few years ago, but it never kept a good wireless connection so it has been sitting in a closet collecting dust. Can this relay be used directly with the RA*? Also, when I received it, multiple of the ports were unusable beca...

my RA hasn't locked up since replacing float switches, must have been them slowing failing

i just hooked up my new float switches today. will see if its any better in a day or two

They are in the standard ato configuration with wires up on one and wires down on the other. The return chamber is very calm so I don't think it's waves. Guess I could buy some new switches. Just think it's odd that it happens more often the closer they are to the pump

I recently upgraded my tank/sump and have ran in to an odd problem with my reefangel. My new sump requires that my float switches are closer to my return pump than my old sump. I think it is causing magnetic interference with the switches causing them to occasionally cycle on and off rapidly. When i...

I get a lot of timeout errors as well. Any idea what causes this? Portal works fine

i have some time off this weekend so I could give it a shot as long as I don't need any special equiptment

does a re-program require it to be pulled out and sent back to you?

another question about the expansion. I just go back in town after getting it setup. Last night I noticed that every 10-20 min my refugium light would turn off for a second then right back on. This light is hooked up to the wireless relay expansion. I think the expansion is losing connection to RANE...

awesome. thanks. also- what is the minimum time you can use for a dosing pump to be on? I wanted to do frequent small doses to minimize swings. I set a 5 sec on time. I just watched one of the dosing intervals and it seems like it only actually pumped for 1 second. Is there is a delay in the pumps c...

just hooked up 2 of the dosing pumps. i calibrated by timing how long it took to move 250cc. Got one to be 0.6cc/sec and the other to be 0.65cc/sec. Is it normal to be off the 0.75 mark?

Two quick questions. 1, is there a 1.1.1 memory file?
Two, I added a ranet relay expansion today. Every time I try to switch to box 2 in clientsuite the program crashes. Any ideas?

thanks, that fixed it. I used a small screwdriver and was able to bend some of the copper in the two outlets the didnt allow me to plug anything in. That seemed to fix it. Still a little rough plugging things in them though

I tried to hook up my ranet relay expansion today. None of the outlet seems to work. Even when I set them to always on. I flipped the 1st switch on. 2 and 3 are off on the side. Also, there are 2 ports that I cant plug anything in to because the copper inside is bent. Is this fixable? here is my cod...

you can get the APT for 66$ without an enclosure.

Anyone have input about the RA ones? Only ones i can find reviews on are the old 2 ch ones

I am thinking of adding some dosing pumps to my setup now that I am using 2 part. I have been kicking around a few options and cant decide on which. First option is just buying a pre-made one. They jebao seems like a cheap solution that has decent reviews. My other options was to add single pumps to...

As in override to keep the port on all the time? Also, what is the APWM% and DPWM% in the memory section of the client suite controlling? The numbers in there don't correlate to anything I have set.

I recently updated everything on my reefangel and used the wizard to create all of my code. I used the the " internal memory" setting. I am trying to use client suite 3 to change the PWM on my lights. When I change the % and click ok it changes is for about 5 seconds on the application its...

hooked up new float switch yesterday and all is good once again

i never could get my pH probe to function correctly, even after replacement. I finally just gave up on it because tank was running fine and no need to chase ph anyways.

no changes at all. just typical water changes. Makes no sense to me. I guess I will just run it with the switch inverted and see what happens. maybe it will switch back to normal again after a few days haha. who knows.

I have had my RA running for months now without problems. I have not changed any coding for months. Starting this weekend my ATO started turning on even when the float switch was up. Thankfully I have a timer set on my ato pump or I would have had a nice little flood. I started looking in to it more...

Hello- Just recently bought a new laptop with windows 7. I installed the client suite fresh on it and everything was working fine until yesterday. The wifi address of the reefangel changed so it is no longer connecting to client suite. Every time i try to run the service dash to change the IP addres...

thanks. the in the void setup section correct? Also, when in water change mode, ATO is disabled correct?

quick question. how do I change what ports water change mode toggle? Outside of ragen that is. I already have the rest of my code the way i want it. thanks

the driver? i will give it a test tomorrow. I have them mounted to a pretty large heatsink though.

here is my tank build thread so you can see what i mean

http://www.nano-reef.com/forums/index.p ... 273895&hl=

thanks for the quick reply! I think i may be the only person alive now with a non-smart phone haha.

quick question about the standard pwm coding. The code i am using is below. Is there a way to control the peak daylight and actinic value from the client software? Or do i have to manually code the max values if i want to change them? thanks ActinicPWMValue=PWMSlope(10,00,22,15,0,70,120,ActinicPWMVa...

Awesome. I'm very interested on knowing how those drivers work out. I'm actually specially interested on knowing if they really can dim down to 1% and how hot the chip gets. When you find out what is the lowest cutout point, will you let me know? I've made my own LED drivers in the past that could ...