Reef Angel Forum

Hi The screen on my standard Reef Angel unit fades/distorts after a while. I fitted my Reef Angel Plus screen to it and then the backlight comes on, but displays nothing (even after entering the code "InternalMemory.LCDID_write(255);"). I also tried to upload all the different screen gener...

Howzit @binder, @rimai, @Inevo. . will you guys upload that ato code your side and replicate to see if you also getting a different functionality please?

Float switches were tried in various positions including that way you advised that is why I am asking that the problem is replicated on your side please and I hear you @rimai.

@rimai please reply to my posts.

rimai wrote:Probably you have the channels in the wrong position.
Try switching 0 on top and 1 at the bottom

I did this.

rimai wrote:Probably you have the channels in the wrong position.
Try switching 0 on top and 1 at the bottom

Please upload this on your side and just test it for me. It appears to be code issue.

@binder

@rimai

You have already been a big help @binder - it's much appreciated! !

I look forward to your answer.

Now this code compiles, that's great ! BUT am I too much of a perfectionist here or what buddy?? We are trying to have the standard ato funtion but just on the i/o expansion. I tested it using the same orientation of the floats as required in standard ato. Standard ATO Here is the way the Stand ardA...

OK cool thanks will do so now as soon as possible should be this morning! Let you know...

Hectic! I know what that's like.. it's at least an evening or two's work and having stuff like leaks doesn't help reduce the time. I once converted a boyu tank for someone to include an overflow and a sump.. it was a 1m tank with the cuboard being two separate compartments at the bottom so I had to ...

OK thank you sir! Do you have a separate system for testing or do you just upset yours? I'm thinking of keeping one just for testing as I have another one.. I have several. I have 1 specifically for testing. with what I am doing for you doesn't require anything other than compiling the code. Any lu...

Any luck with us putting this one to bed...

OK thank you sir! Do you have a separate system for testing or do you just upset yours? I'm thinking of keeping one just for testing as I have another one..

Updated code with compilation fault variable or field 'ATOoverIO' declared void RA_Ino_ino_ATO2:27: error: variable or field 'ATOoverIO' declared void RA_Ino_ino_ATO2:27: error: 'ATOIO' was not declared in this scope RA_Ino_ino_ATO2:27: error: 'ato' was not declared in this scope RA_Ino_ino_ATO2.cpp...

Fixed some of the obvious things, here is an update on the compilation fault- variable or field 'ATOoverIO' declared void sketch_aug23a:26: error: variable or field 'ATOoverIO' declared void sketch_aug23a:26: error: 'ATOIO' was not declared in this scope sketch_aug23a:26: error: 'ato' was not declar...

Thank you for your time with this.. I just tried to compile and received the following: variable or field 'ATOoverIO' declared void sketch_aug23a:26: error: variable or field 'ATOoverIO' declared void sketch_aug23a:26: error: 'ATOIO' was not declared in this scope sketch_aug23a:26: error: 'ato' was ...

OK thanks a lot I'm looking forward to your positive response.

I haven't managed to come right yet so i tried a more basic approach.. still without any luck! //RA Standard ATO code for ATO2 on IO exansion void StandardATO() { // If the low switch is active, turn ATO2 pump on if (ReefAngel.IO.GetChannel(0)) { ReefAngel.Relay.On(ATO2); } // If the high switch is ...

If I insert a value here then how will i be able to change this via the App or Portal?

JclaasSA wrote:void ReefAngelClass::StandardATO(byte ATORelay, int ATOTimeout)

Just to answer my own question it looks like the 150 seconds time out must be put in lace of ATOTimeout.

Thanks @binder i first had to figure out where exactly i find this library folder so i researched a bit and came across some useful information at www.arduino/en/hacking/libraries which directed me to it's location on Windows: My Documents\Arduino\libraries\. When I went there I ended up at C:\Users...

Hi everyone :), I am new here... based in East London, Eastern Cape, South Africa. I hope you are all well!! I am needing some help with adding an AUTOMATIC WATERCHANGE to my Reef Angel (RA) system. I want to use the ReefAngel.StandardAto (Two float switches) connected to channnel 2 and channel 3 on...

Hi everyone :), I am new here... based in East London, Eastern Cape, South Africa. I hope you are all well!! I am needing some help with adding more ATO pumps to my Reef Angel (RA) system I currently have ATO1 (StandardAto) operating fine on relay box port 1 with float switches connected to the high...