Reef Angel Forum

Its been much more reliable after adding the external antenna.

It does sometimes disconnect and blinks green and blue, but its much more stable.

rimai wrote:When it disconnects, does it blink blue?

Yes it is blinking blue.

I got this antenna and it is working fine WiFi Antenna 8dBi Omni RP SMA Male RPSMA Antenna 2.4Ghz 5.8Ghz Dual Band + 20cm U.FL to RP-SMA Female Extension Cable for Mini PCIe Card Notebook PS4 Drone 1 Pcs https://www.amazon.com/dp/B07QKD56TT/ref=cm_sw_r_cp_api_i_SCW2DbPK5KF89 It did timeout once sinc...

I remember reading something at some point about changing the timeout setting on the wifi attachment. Its currently at the default of 200. Is this something i should try? Are there any other tweaks in the wifi settings that may help it stay connected at all times? I am trying the xternal antenna, bu...

For future reference here is the link I found about adding an antenna.
Sounds like a good idea. I’m doing it

http://forum.reefangel.com/viewtopic.ph ... al+antenna

Are there any tips or tricks I can do to get the wifi attachment to be more stable? It’s hit or miss when it comes to its connection. I can connect and refresh 5x with no issues sometimes, then when I try to connect 3 minutes later it’s offline and can’t connect. It’s off and on like this all the ti...

Ok so the Ph Exp is still not working.

The PH7 and PH10 calibration solutions stay around the same value. =/- 10.

Please set up an exchange asap.

Ok so believe it or not i found the darn issue causing the PH probe to read incorrectly in tank.
It was the TEMP PROBE all along!!!

Soon as i unplugged the temp probe the PH jumped from 6.5 to 8.1 (much better!!!).

I will test the PH expansion again now.

Guys I apologize for all my posts but I really do require some support here. The PH expansion sent to me is not working. I need to setup an exchange for that. The ph probe on the controller is not reading correctly when in the tank. I don’t know why this is and can definitely use some help. The prob...

Im trying again. Now with the probe in ph7 solution its reading 1166. Trying the ph10 solution after this stays stable for 10 minutes. EDIT: PH10 solution is at 1143. The ph expansion is definitely not working.... Wow, is it just me or is this like a regular thing? So far all the parts i have ordere...

I just received the new Ph expansion today. Hooked it all up and added the new Ph probe. Selected to calibrate the Ph Exp from the setup menu. The levels are extremely off. Ph7 is reading at 1150 and PH10 is reading about the same. Is there anything i can do? Am i missing something? Everything sound...

Is there any instructions on calibration for the expansion probe?
So it won’t effect the controller probe calibration?

rimai wrote:Sent you a pm

Thank you very much!!

I just realized what’s wrong. I have had absolutely no luck with several new parts I recently ordered. The probe is faulty. The wire on top of the probe is causing the probe to not read ph. I need to mess with the wire to get it to read, but it is not stable. This and the new temp probe is not worki...

Pic attached

Seems no matter what I do I can’t get it to read correctly.
Now it’s at 1.80 while in the tank. It goes up when I take it out.

Are there any tips or tricks I can use to stabilize the ph probe attached to the controller? It started reading at 2.23Ph. My tank is healthy and if this were true everything would be dead quick. It’s been at 2.23 for over a day now and is not budging. I’ve tried restarting and unplugging - repluggi...

lnevo wrote:CO2Control uses the regular PH probe as a default, but you can also use the expansion by passing an extra argument.

ReefAngel.CO2Control( Box1_Port7,750,770, true );

Perfect, thank you!

Thank you for the explanation.

This is working perfectly now.

You can do the same thing as the other code you have: if ( ReefAngel.Params.PHExp <= 750 && ReefAngel.Params.PHExp > 0 ) ReefAngel.Relay.On( Box1_Port7 ); if ( ReefAngel.Params.PHExp >=770 ) ReefAngel.Relay.Off( Box1_Port7 ); So 'PHExp' is what specifies its the expansion Ph probe and not t...

I am sorry for all my question. I friend recently gifted me the reef angel and i have been adding stuff on to it. I am still new. I just ordered a ph probe attachment. I have the ph probe that attached to the controller running fine. This will be the 2nd PH probe. I want this one to control the CA r...

The code is throwing an error:

In function 'void loop()':
error: lvalue required as left operand of assignment


Looks like it does not like = 0

Yes its not working.

rimai wrote:Just to be sure, you have to connect the new probe and reboot. Not the other way around.
All probes are scanned only when the unit boots up. If it is indeed not working, send me a PM.

Yup i have rebooted several times. I will try again just to be sure.

Thanks!

DelayedOn only works after reboot, feeding mode or waterchange mode. What you want to do is set the relay override which you can do with ReefAngel.Relay.Override(Port7, false); That will turn the relay on definitively. However it won't go back on unless you do it manually or add additional logic to...

Did you reboot after installing it? You could try it in a different port if any difference. Also the temp probes have a digital serial number and the order the probes appear is determined by that. So the new one wont' necessary be T2... You may also need to try one at a time. Either way, it isn't r...

Just wanted to be sure i can hook up a 2nd PH probe to the reef angel plus without huge problems to my current probes.
I currently have one PH probe connected to the controller and i have a salinity probe expansion.

If i get a PH probe expansion to use with my Calk reactor will this work?

Recently got a new temp probe in and its not working at all.
My original is working fine, the new one is not giving any readings at all.

Did something change or is my new temp probe just faulty?

So this is working great when it comes to turning on the relay when water reached a certain level However i ran into another issue, the water level tends to jump 1-3% from 89-92 back and forth. Is there a way to put a delay on this relay as well? I did try adding to the code: ReefAngel.Relay.Delayed...