Reef Angel Forum

How hard would it be to include some graphs like where the light channels are, or temp over the day etc. I am thinking of grabbing a Nexus 7" and a suction cup mounting bracket and mounting it too the tank to be kinda like the Profilux touch control and use your app. Its the only thing I can se...

I should add a trick for you butcherman. I can't connect with the wifi util to my unit, however if you use Dave's tool instead, while it won't read your settings or give you ANY feedback that its doing anything, the settings you apply to the unit are actually being applied. Its REALLY weird.

This is exactly the same issue I am having. My wifi works fine but it can't be read when I need to make a change (which I do need to do soon)

No, only had the reef angel tools installed. Its funny, When I request settings or something else I can see the lights flash and start to work, it just doesnt give me an output

Interestingly enough, I loaded your app (fresh windows install) and it could not see my wifi adapter (kept telling me to unplug and plug it back in) I loaded up Daves tool and it wouldnt read any of my info. I hit "Save Remote Settings" anyway and what do you know, it actually is sending d...

Bit of an interesting one (for me at least) I figured that I have not configured my wifi properly as I don't get graphs on the portal. However it gets its IP, responds (95%) of the time when the android client connects and in general, works. The issue is when I plug in my wifi adapter to the compute...

Im loving this app, it is the main app I use to control my tank :) I had a thought about a feature, When I go away, I setup an IP cam to remotely check the tank if it alarms. It would be awesome if there was a way to have the live video in one of the screens of this app so I can swipe to it. Not sur...

Yeah I just pulled the cable out (the vga) and put it back in and it is running as per usual again.

Interestingly enough mine did this today. Wifi and Vortech Module with USB expansion. No reason for it, it just locked up on a white screen. I only noticed because my phone started screaming it couldnt contact the controller. I don't have an IO module so not sure if there is something I can try. My ...

Ah, that would explain it, cheers

Okay, sorry for the delay in replying. I took out the two lines of code and still I can't set the mode. Using library version 1.0.0 I grabbed ReefAngel Status to make the write changes to memory. If I set the value , for example location 855 and set 5 for NTM mode, it writes fine. If I read it back ...

Internal Memory. Tried to use 855 as the variable in the android app. Code is #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include < Wire .h> #include < OneWire .h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaLCD.h> #include <R...

Hi Guys, Since Iv used the Reef Angel Wizard to generate my code with my Vortechs, I can no longer control them from my android phone. Iv tried doing it via URL and through the android app however I cannot get it to change over what was preset. Do I need additional code for this? My only other optio...

okay, solved this one myself. I used the standard utility (not daves) to update the firmware, factory reset and started again.

This seems to have cleared my problem.

Hi All, Recently my wifi has just stopped responding. I can ping it, it goes solid when I do getting the connection but it no longer responds. Iv redone my code from scratch with the wizard and it still doesnt connect. Any suggestions? code is here #include <ReefAngel_Features.h> #include <Globals.h...

Thanks for the help, really appreciate it. Sent you an email about 1 more thing

Cheers

matt

Well I feel like an idiot. For some reason, rst wasnt on so I must have knocked it off when I swapped the boards. With all 3 jumpers on, I can upload code again

Can you confirm how the jumper configuration should be?
I have two boards and they have two different jumper configs so I don't know if I am right or not

Interesting update. I got the RA+ board that had the incorrect chip which didnt recognise the relay expansion. I just remembered I had it and I grabbed it out, plugged it in to the relay and the USB cable and presto, it is uploading code fine. So we know where the problem is now (in that board), is ...

Yeah it is really strange. I just moved house and had to wait a few weeks before I could put the tank together, I was playing with code, got the wifi to work and everything else and it was all uploading fine.

Even now if I plug the wifi in, I can control the two relay's and check temp etc.

I turn the listener off each time I test and I have already checked that setting under the comport and no joy unfortunatly

Sadly no reboot when I open that up

I watched it last night and it does not appear to reboot, no.

Tried that just now, same message, tried it with everything unplugged (besides the USB of course) and still get the same message.

I know I am on the right com port because I can communicate with it when I use the Reef Angel Client.

No worries, I appreciate you trying to help

I have the RA+ which is the selected board

I should also add, I updated both my laptop and my PC to the latest software and both present the same issue.

tried that as well and its on Com 7 as Reef Angel Client accesses the controller via that
Thanks for the suggestion tho.

Hi All, Just about to start getting my reef angel setup properly and decided to do it and wipe the basic ragen config and replace it with a more advanced one. The issue is however, I can't upload new code! Iv uninstalled and reinstalled and rebooted and did a little googling however I am not sure wh...

Hi All, I just received my new tank and I am playing with my new RA+ on the bench trying to get familiar while I wait to finish the tank and its work off. I have my expand relay going, wifi is fine, RF module is in now as well and I am getting the hang of things as there is plenty of example code ar...