Reef Angel Forum

Very odd, I will send you a PM maybe its a hardware failure of the wifi attachment.

Hi Casper I found a bug where the features file wasn't getting counted correctly and the Menus weren't being counted. I tested the code below it compiles and is working now. #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Tim...

Will you post your code or errors? Depending on how old the code is I know some changes were made to the libraries over the years that might be contributing to the compiling errors.

- In Tera Term, go to 'Setup' -> 'Serial port'.
- Choose 57600 baud.
- Then, go back to 'Control' -> 'Macro' and reopen the .ttl file.

You are using a usb-ttl cable correct? Once you click okay if should show output in the Tera Team Terminal. Can you send picture of your wifi attachment? I'll take a picture of the process later today. Once you click okay it should run through the process and then the start Wifly Module configuratio...

What does the output show in the terminal? Also if you have a space in your Wifi SSID make sure you put a $ in place of the space. For example, if your SSID is called "My Wifi" then it would be "My$Wifi"

Is it a slow blink blue or fast blink or just solid?

Just once should do it if I recall correctly.

Hi Fredrik, you will need to upload the new firmware to your wifi attachment using Tera team as well as reinstall your code using the online webwizard Link for the wifi attachement is below unzip the folder download tera team. Change the Wifi SSID and Password in the ttl file and use Tera team to fl...

Yes that is the code for using both float switches

Do you have the wifi attachment or cloud wifi attachment?

You will need to update your WIFI attachment. I sent you over instructions in a private message.

Yes it is, but you won't be able to login until data is received from your controller.

Make sure you are using the online webwizard. forum.reefangel.com/webwizard I tried compiling the code and it compiled fine. As for adding the ATO you can use this line below. Place it in the void loop() Please change the port to your liking and the 65 is timeout in seconds. so change it to your lik...

Yes that is correct!

Hi Casper, looking at your code I fixed the Menu Options as it was changed how they were declared in the libraries a while back. Right now the code does indeed have Storm Function, Light Control, Heater Control and Timed scheduled ports I will list them out below. I don't see anything for the ATO fu...

On a side note you can setup alerts in the Uapp to also notify you if a parameter goes out of your desired range

Yes 12v buzzer is fine

This code below is only for the Reef Angel Star as it has a built in buzzer. if ( buzzer ) ReefAngel.BuzzerOn(2); else ReefAngel.BuzzerOff(); The RAPlus does not have a built in internal buzzer so you would need an external one and run it off one of the PWM Channels. The code you would use is this b...

You should just have to login to the Uapp and go to the email alerts page and turn off the disconnect alert toggle. Let me know if you have any issues.

So there isn't a way to detect which device is causing the bus locks in software, but you can disconnect one expansion at a time to verify which one is causing the issue. I've had bus locks due to rust formed on the USB port / cable, as well as when I have the USB cables placed next to my dimming wi...

I should have kits available in the next couple weeks!

Yes that is correct, just add the jumpers to change the output type or voltage!

It sounds like it still thinks the joy stick is being pressed or moved. Here is the relevant code in the ReefAngel_1.5_LCD.h void ReefAngelClass::CheckScreenSaver() { // process screensaver timeout if ( Timer[LCD_TIMER].IsTriggered() ) { // Screensaver timeout expired LCD.BacklightOff(); } if ( Joys...

I noticed this bug the other day as well, when you switch between controllers on the Uapp it doesn't sync the labels correctly. I'll push an update to the Uapp once i get it resolved!

Does it still reboot when no other devices are connected?

It would still be box 1 so you don't need to change anything. Can you go into the Uapp, open the menu on the top left and click on logs? Then under Alert logs check and see if you have any bus locks?

If they fit those should work, but I will send some to you Monday as well

You will need some jumpers, you may have some on your old relay box depending on what version you have, if not I can send you some. You place the jumpers on the pins so as you can see on the photo i have 3 jumpers on ANALOG for Daylight, Actinic and Daylight2 so those ports are all Analog. If you ha...

Yes I'll attach some photos

If you open up the Reef Angel Star you'll see 4 pairs of jumpers your lights may need to be changed to analog instead of PWM. Do you know what your old relay box was setup for?