Reef Angel Forum

Yes that is the code for using both float switches

Do you have the wifi attachment or cloud wifi attachment?

You will need to update your WIFI attachment. I sent you over instructions in a private message.

Yes it is, but you won't be able to login until data is received from your controller.

Make sure you are using the online webwizard. forum.reefangel.com/webwizard I tried compiling the code and it compiled fine. As for adding the ATO you can use this line below. Place it in the void loop() Please change the port to your liking and the 65 is timeout in seconds. so change it to your lik...

Yes that is correct!

Hi Casper, looking at your code I fixed the Menu Options as it was changed how they were declared in the libraries a while back. Right now the code does indeed have Storm Function, Light Control, Heater Control and Timed scheduled ports I will list them out below. I don't see anything for the ATO fu...

On a side note you can setup alerts in the Uapp to also notify you if a parameter goes out of your desired range

Yes 12v buzzer is fine

This code below is only for the Reef Angel Star as it has a built in buzzer. if ( buzzer ) ReefAngel.BuzzerOn(2); else ReefAngel.BuzzerOff(); The RAPlus does not have a built in internal buzzer so you would need an external one and run it off one of the PWM Channels. The code you would use is this b...

You should just have to login to the Uapp and go to the email alerts page and turn off the disconnect alert toggle. Let me know if you have any issues.

So there isn't a way to detect which device is causing the bus locks in software, but you can disconnect one expansion at a time to verify which one is causing the issue. I've had bus locks due to rust formed on the USB port / cable, as well as when I have the USB cables placed next to my dimming wi...

I should have kits available in the next couple weeks!

Yes that is correct, just add the jumpers to change the output type or voltage!

It sounds like it still thinks the joy stick is being pressed or moved. Here is the relevant code in the ReefAngel_1.5_LCD.h void ReefAngelClass::CheckScreenSaver() { // process screensaver timeout if ( Timer[LCD_TIMER].IsTriggered() ) { // Screensaver timeout expired LCD.BacklightOff(); } if ( Joys...

I noticed this bug the other day as well, when you switch between controllers on the Uapp it doesn't sync the labels correctly. I'll push an update to the Uapp once i get it resolved!

Does it still reboot when no other devices are connected?

It would still be box 1 so you don't need to change anything. Can you go into the Uapp, open the menu on the top left and click on logs? Then under Alert logs check and see if you have any bus locks?

If they fit those should work, but I will send some to you Monday as well

You will need some jumpers, you may have some on your old relay box depending on what version you have, if not I can send you some. You place the jumpers on the pins so as you can see on the photo i have 3 jumpers on ANALOG for Daylight, Actinic and Daylight2 so those ports are all Analog. If you ha...

Yes I'll attach some photos

If you open up the Reef Angel Star you'll see 4 pairs of jumpers your lights may need to be changed to analog instead of PWM. Do you know what your old relay box was setup for?

What channels are you using on the Star? Also when you adjust them with the slider in the uapp do they change at all?

To change the label you need to add //RA_LABEL LABEL_TEMP1=Display

The dimming ports and USB port on the old relay box are not useable with the Star

I will add the horizontal view to the relay boxes in the next release of the Uapp, as for the internal memory I don't believe the 2 extra diming channels were ever added to the Uapp for the Star, I will add this to the TO DO list. Thanks for letting me know!

Sorry for the late reply, if i am understanding you want to have port4 on after either ato has been active for 60s. You can try the code below adjust the activation delay to your liking //Place in globals unsigned long highATOActiveTime = 0; unsigned long lowATOActiveTime = 0; const unsigned long ac...

At the bottom of your code you'll see the port labels. You can change them and reupload your code to display on the Star. As for the dimming ports on the star there is a an rj45 on the bottom of the controller which you can splice a standard ethernet cable or I have a break out board that will be li...

Make sure you place ReefAngel.AddExtraTempProbes(); in your void setup. I will have to verify the screen libraries for the plus, but I don't believe the extra temp probes were ever added to the libraries to display on the Plus Screen. If it's not showing in the Uapp it sounds like there is an issue ...

Glad it's working! The server listens on port 3000 for data sent from the Reef Angel Controller for the graphs, and email alerts. The web server running on the Reef Angel listens to requests on port 2000. The RA Star and Cloud WIFI Module uses MQTT and the server captures the MQTT messages for the g...

KF2510 2 pin is the connector for the dimming ports for the RAplus Relay Box. I am not completely aware of the circuit differences, between the 2, but my best assumption would be the analog relay box uses a low-pass filter to filter the PWM signal to analog so the PWM Relay box would be missing thos...

Your controller hasn't sent data to the server since June 24th so what has changed since then? If you used the webwizard to upload your code then it is most likely an issue with the wifi attachment. Did you use the firmware below to update the wifi attachment? forum.reefangel.com/firmware/updatewifi...