Reef Angel Forum

Roburto dont know how often you get thanked, but going to take this opportunity. Thank you.

If anyone ever asks me why go RA my answer will be SUPPORT. Try get support from any other controller at 21:40 I dare you

Okay as said before im a dumbass especially when it comes to programming and understanding arduino but I redid the wizard and uploaded and got a screen on my RA about memory updated and that I can now upload my ino. So I hit the generate and upload button again. Now everything works. Dont know how d...

but wont I then loose functionality of changes values from my phone

Sorry being a dumbass. but I dont know how to update the memory locations with my android This is what I did when I was setting it up Port 5 is where the WP25 are powered from http://i1284.photobucket.com/albums/a566/toolboysa/20131210_195641_zps57b112b5.jpg and this is what i did on dc pumps http:/...

Running Nutrient export mode

Hi So obviously i stuffed up royaly somewhere in the wizard to get the 2x WP25 to run, cause they aint coming on at all. Also did the upgrade to RA+ :D Anybody want to take a look and tell me where I stuffed up #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire....

I have pwm expansion 2.1

No problem. Will do it for you tomorrow

Good news that I can still use my current unit. Im no electronics boffin. More likely to burn through the board than anything else. Luckily my brother in law does electronics if you could send me instructions and whatever else one would need to do this ill ask him if he can do it otherwise ill send ...

Thanks Roburto. Cant say im overly pleased about the news. My only option would then be to move over to the LDD type drivers which shouldnt be a problem except my pwn unit outputs 10v and LDD uses 5v. If i understand it correctly. Without having to buy another a new pwn unit is there any way to get ...

HI Having an issue with stray voltage that I just cant figure out. I've got a std reef angel with a pwn addon unit. and standing barefoot on my tiles Ive managed to track it down to something to do with the ELN drivers and the ph probe. If only the power to the drivers is connected. The pwm unit is ...

Does the WP25 then directly connect to the RA without using the jaebo controller at all? Cause then I could just cut the cable on the controller and put on the plugs for RA and save $50 which I can then use on a ATU pump

Awesome. Thanks

Hi

I recently bought 2 jaebo wp25 and I see that there are RA cables for them aswell

I have a std RA PWM model. What ports does the wp25 cable connect to? I want to be able to do anti sync and variable speeds similar to vortech nutrient export mode

thanks in advance

HI Not sure if this is possible. But can the wifi unit connect to a phone using wifi direct like android uses? Reason for me asking is cause when we loose power (happens way to often here in SA) I loose ability to control the tank cause obviously the internet also goes down aswell. My RA is connecte...

k fixed that connection status aswell.

I'm just going to crawl under a rock for a few days till I have the courage to show my face in public again

Holy crap. I'm now really embarrassed I can figured why it wasnt talking to the portal. Fixed that and it working again.

But strangely enough its updated the info on the portal but still showing the connection status as unreachable

Worked fine until 1 April 18:55:15

The RA was disconnected for a few days from the prev tank before i put it on the new tank. Ive checked the wifi unit setting now and the are still the same as they were before

Nope nothing

I can even connect my phone to my home wifi and switch ports on&off from the app and change setting in the memory. Its just not talking to the portal

Hi So my wifi unit has been behaving for months now. And the all of a sudden on the 1 April at 18:55:15 the last update was sent to the portal. Now here is the strange part. I go to my web browser and enter the ip address and :2000 and I get to the Reef Angel Controller web page and also if I add th...

Yes. And I solved my problem

Reset pins to original. Uploaded code. Then put the other two pin connectors in. Works 100%

Just partially blind from looking into the leds

Hi Im trying to add my new PWM unit Ive compiled my code with the wizard and when I say upload I keep getting an upload error Below is my code #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #in...

Hi Roberto

Ive done as you requested

http://forum.reefangel.com/viewtopic.php?f=8&t=2291

Please could you move binder answer to the new thread

HI Im building a led light unit that uses 6 different LED colours. Which will connected to the PWM dimming expansion. The 2 on the relay box will be used to sort my led unit in the sump Im pretty much a beginner at programming, but Ill try if someone can point me in the right direction of how to do ...

The limit of 9 menu items. Does that include the ones already preloaded on my reef angel? Reason Im asking is cause my LED unit is going to be 6 colours and need to be able to set each one at the max % that I want to get to achieve the colour Im looking for. eg White 100% Blue 100% UV 40% red 30% ec...

Hi

I have two drivers (Meanwell ELN-60-48P) that run my 24xRoyal Blue LED's. What I need to know is can I wire both drivers to the same pwm port?

thanks

Roberto gave me this link http://forum.reefangel.com/viewtopic.php?p=10947#p10947 to do exactly that. Unfortunately didnt work work for me, but try it anyway. might work for you

Cool. Pm sent

I used the wizard, but didnt put values into the internal memory but had it put it into the code and it all works fine since 14 June 2012 The only issue I'm having since I did this. Is the wifi unit loose connection often. Some times in 6 hours or sometimes 2 days. Most times I just have to unplug t...