Reef Angel Forum

Cleaned up the contacts and it's been working for a month now. In case anyone has the same problem.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Ever since I add an additional power outlet and conversely an expansion hub, my unit has been acting up. The hub will make a click and sometimes flash a bright red light. I have a dimming module, a water level expansion and the power outlet plugged into it. Is there a way to log what is happening? I...

Ok solved this. The driver dimming shares a common ground with the DC power there was no dim - so the circuit wasn't complete. Working perfectly now all the way to zero.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

The driver claims that it can be dimmed to zero. Since adding the dimming module my head unit has been a problem. I have the hub, with a water level expansion, second relay, and now the dimming module. It seems to reboot itself sometimes several times in a row. The wireless module freaks out too. Do...

Greetings all. I recently added a dimming module to control some LEDs that I have added. The driver is the blueacro dual channel. It uses 0-5v I set the first two channels to the 0-5v with jumpers. I can control the LEDs but they don't go to zero . Anyone have any ideas? Sent from my Lenovo TAB 2 A1...

Thanks,

I was hoping that there was a way to step it down before the driver.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Any way to use the dimming ports for the actinic on a led driver that takes 3.3 - 5v?

If not, then if I use the ato ports will I be able to dim the channels via the app?

Sent from my SAMSUNG-SM-G935A using Tapatalk

Bingo.


Thanks for the help.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

So all dip switch up?

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

Code referenced box1 for relays that I assigned to be on or off besides the primary box

Dip switch is one down 2-3 up. I just used the wizard but I can look at the code.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

I2CScanner ready! starting scanning of I2C bus from 1 to 128... addr: 1 addr: 2 addr: 3 addr: 4 addr: 5 addr: 6 addr: 7 addr: 8 addr: 9 addr: A addr: B addr: C addr: D addr: E addr: F addr: 10 addr: 11 addr: 12 addr: 13 addr: 14 addr: 15 addr: 16 addr: 17 addr: 18 addr: 19 addr: 1A addr: 1B addr: 1C...

no change

I bought a used relay expansion with the new plug types. I set it up with the dip switch to be #2 . It's connected to my expansion hub. Plugged into the wall. It powers on, the ra+ sees it,as does the portal and app. Problem is none of the ports have power. Even if I turn them all on instead of auto...

Tried to PM you, not sure if you got it. Would you sell the WiFi separate?

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

I actually got it to work via the portal, but the app blows it up.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Tried to im but I don't think it worked. Interested in the relay expansion if you are parting out.

Sent from my SAMSUNG-SM-G935A using Tapatalk

I don't think Delayed On does anything in the Webwizard. If you are putting values in the code, just use a timer with different on/off times for each port/relay. If you are storing values in internal memory, my code should work: Included with your void loop() statements (obviously edit to match you...

Greetings all, I am trying to figure out what I need to do to get my mh lights on at 1pm off at 4, but have my actinic from 9am to 9pm. I tried to use the uapp to set daylight on @ 9 with a 240 minute delay, but they came on @9. I also tried having the actinic offsets be 240 minutes but then they ne...

rimai wrote:Yes, your banner is updating.

Great success!

Thanks again.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

ok changed it.

Can you tell if its posting any data?

rimai wrote:New server ip address is 104.36.18.155
Change this:

Code: Select all

IPAddress remoteserver(198,171,134,6); // www.reefangel.com

To this:

Code: Select all

IPAddress remoteserver(104,36,18,155); // forum.reefangel.com

Thanks, I'll try it this weekend.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

Can you post your code? Maybe the code you have is pointing to the old server. /* Web Server A simple web server that shows the value of the analog input pins. using an Arduino Wiznet Ethernet shield. Circuit: * Ethernet shield attached to pins 10, 11, 12, 13 * Analog inputs attached to pins A0 thr...

Hmm I'm using a diy ethernet mod. Maybe it can't pass the data into the the portal the same way.

Sent from my SAMSUNG-SM-G935A using Tapatalk

icecool2 wrote:Loads in a flash now. Thanks!

I am having the same problem with the graphs, can you do the same for me?

Sent from my SAMSUNG-SM-G935A using Tapatalk

Hmm looks like I need to find a buyer for my ra plus...

Sent from my SAMSUNG-SM-G935A using Tapatalk

rimai wrote:Yes. All expansion modules will work on both controllers.

Hmm now you have me thinking... The only thing is that my ra is running so well.... I probably don't even need to upgrade...
What is the delivery time for the whole new setup?


Sent from my SAMSUNG-SM-G935A using Tapatalk

I'm not opposed to buying the whole thing, If I can sell my old plus. I have the water level expansion and hub, will those just plug and play?

Sent from my SAMSUNG-SM-G935A using Tapatalk

Can you purchase only the main board?

Yeah I could do that but I am currently 700 miles away from the tank on vacation....

I guess maybe I can get someone to go to the house and hold it out for me.

Sent from my SAMSUNG-SM-G935A using Tapatalk