Reef Angel Forum

rimai wrote:Yeah, we may need to replace.
I'm going to make a small batch.

Any progress on the new batch?

Today it's been doing it frequently and I also noticed that my water level expansion was showing my water level to be 250% and fluctuating wildly. I have also encountered this behavior a few times, a restart usually fixes the problem but it still feels a bit uneasy in case some other time it will f...

i dont think you can have multiple versions targeting different platforms. the legacy users just will not be able to upgrade to anything newer than the version they are at. I had a look around and found this: http://developer.android.com/google/play/filters.html You can use any combination of the a...

Isn't it possible to have multiple versions deployed simultaneously in the play store, targeting different platforms? I think I read something about that some time ago. If so then it would be possible to keep the current version that targets pre 4.0 for legacy and users with +4.0 would get the new v...

I added some serial print to trace the different variables. The topping seem to work occasionally but most of the time not. WL: 73 WLATO.Timer: 262144 millis(): 282117 diff: 19973 IsTopping: 1 msTimeout: 20000 WL: 73 WLATO.Timer: 262144 millis(): 282140 diff: 19996 IsTopping: 1 msTimeout: 20000 WL: ...

You can try using an if statements to make sure and at least get your ATO working. It will be sans timeout... if (ReefAngel.WaterLevel.GetLevel() < X) ReefAngel.Relay.On(ATO_Port); if (Reefangel.WaterLevel.GetLevel() > Y) ReefAngel.Relay.Off(ATO_Port); Change X and Y and the ATO Port. I could do li...

Yeah my next step is un-/re-installing to see if it might help. The WL ATO used to work but I can't remember if it stopped after an update or if there was some change I did.

The sensor looks ok based on the level reported.

Same thought as I had However WL ATO doesn't use the Timer class, just a long variable named Timer which makes it a bit confusing.

I removed these four lines but still the same behavior. What were your thoughts regarding the dosing pumps? // Dosing ReefAngel.DosingPump( Box1_Port5, 1, 7, 00, 4 ); // 0.75 ml/sec Mg ReefAngel.DosingPump( Box1_Port5, 1, 22, 00, 4 ); // 0.75 ml/sec Mg ReefAngel.DosingPump( Box1_Port6, 2, 7, 01, 5 )...

No I have not found the problem yet. Please have a look at the code below, it's my entire ino file. #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_Nokia...

Whenever WaterLevelATO is triggered (single channel) it goes straight into timeout within a fraction of a second and so it stops filling. If I clear the ATO flag it gets set yet again immediately. ReefAngel.WaterLevelATO( Port1, 20, 75, 80 ); I haven't read about anyone else having this issue so I'm...

Exactly the same error without the module mounted, but the RSSI LED did not light up.

The blue led on RSSI lights up when connecting the cable but in Arduino studio I get error uploading (w/ optiboot). See below for full output. avrdude: Version 6.0, compiled on Apr 6 2012 at 19:29:19 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch Sys...

rimai wrote:I'm assuming that you can't reprogram the RANet module either, right?

Btw, are you referring to the sender or receiver? I only found instructions for reprogramming the receiver: http://forum.reefangel.com/viewtopic.php?p=45104#p45104

rimai wrote:I'm assuming that you can't reprogram the RANet module either, right?

Do you mean reflash the firmware? I don't know but I can give it a try. I think I saw some step by step here somewhere, I'll see if I can find it again.

Does it ever sync? It synced at some time when I just received the RANet and relay but I haven't used it in a while. Now when I tried it the logo has been flickering but never fading smoothly white/blue. I just disconnected the RA and removed the RANet for a while before putting it back in. Now the...

davaraj wrote: LED on relay unit when Head unit is on but not in sync.

http://m.youtube.com/watch?v=067azYoRu74

That is pretty much exactly what the logo looks like for me too :/

Any news regarding this? I heard some rumors about an advanced controller coming from Maxspect enabling 3rd party control but haven't seen anything official yet.

2. Are you sure it was an ATO or overheat and not some other flag? If it was overheat and the temperature is still above the limit, it would cause it to do just like you mentioned. Same thing for a bus lock or leak detection. I'm not sure what flag it was. I suspected ATO because of the random leve...

I switched to dev for a while to try out RANet but I encountered a few issues that made me switch back. Perhaps it's a coincidence and something happened to my hardware when installing RANet or maybe it's something I should have done when switching release but I though I should report here anyway. 1...

Good thing you found it. Great work!

Hell yeah! What did you do? All json request are now roughly 400ms

I'm not very familiar with optimizations of mysql but have you tried adding an index?
To remove index:

What db are you using?

Is the source available somewhere?

What is the main bottleneck in jsonp.aspx? Around 20s for a request feels like a long time.

Ok, so you are planning to up the lowest version? 4.1+?

Any thoughts on switching to Android Studio instead of eclipse?

I have one single module and I just placed an order for an additional single module before seeing this thread :/

Sent from my Nexus 5 using Tapatalk

Any updates? Is it possible to run two single modules together?