Reef Angel Forum

thanks for the hint. I will try it now. Hope it works

Is there a fix for this yet? My phone wakes me up at random times at night and goes off randomly all dya long for this time out error.

What kind of numbers are you getting on the calibration screen when you calibrate the probe? The 7.1 gives me 4.71 after sitting there for an hour during calibration. I didn't want to leave it there long but I wanted to see if it eventually would climb closer to 7.1 but it didn't. This is using the...

It sounds like you aren't using the calibration menu....you can't just stick it in the fluids... You need to go into the menu and choose ph calibration. Follow the prompts to calibrate 7 then 10 the ok to save. You might not have the menu item if you have a custom menu...I remember you had some spa...

very nice sir! I will try it when I get home from work. Thank you again for your time and efforts I am very grateful. The ph probe still isn;t working though. When I calibrated I stuck it in the 7.1 solution and it read 6.3 and that's with the after market new probe. Is it possible the Reef Angel I ...

Hey Roberto I appreciate your replies. Sorry i got super busy today with people in and out etc etc lol... I do have the wifi attachment. So I guess I will have to go the basic menu :/ I imagine I can just cut and paste the part for the tunze into the wizard code? Just the part in the custom code sec...

I would rather have the whole range to adjust from 0-100%. I dont want one setting set in stone. I want to be able to go in and adjust the speed whenever I want. What code what I need for that? I waited all day long for a generic answer like that :( Sorry if that sounds rude and I do appreciate you ...

Sorry for the delay. Got super busy yesterday, Ok so got the menu working thank you for that, For the tunze I was unable to get the code working. All I did was paste it from someones post and I get an error. a function-definition is not allowed here before '{' token Really all I want to do is be abl...

thanks for that link i will try that too. Where on the code is the set up section? Am I replacing the "void setup" with the standard menu code? Sorry I never coded before which is why I use the wizard.

well it sat in the 7.1 last night for about 2 hours and was at 4.71. I ended up canceling the calibration and just stuck it back in the tank and went to bed. I'm at work now but can try again when I get home

thanks for the replies :) Yeah I do the on board calibration so I assume it's done properly. I waited the first time almost a half hour before giving up on waiting for it to hit 7. My old controller would let the probe actually get to 7 then hit continue then let the probe hit 10 then hit continue. ...

it's sitting at 4.7 in the 7.1 fluid by the way..

ok well I have my probe sitting in 7.1 waiting for a reply, sooner the better

first issue: I used the wizard to set up code. Set my port 1 to turn on during lights on mode. The problem is lights on mode doesn't show up at all on the menu on the controller. Second issue: I have port 8 set to shut off during water change mode which is my ato pump. I hit the water change mode, s...

yeah I have alerts set up but they didn't alert me is the issue.

Yeah I seen the feeding mode and such but usually you're at the head unit when you use that anyway. I was hoping to be able to control ports but don't see that option. maybe there's another version of the app somewhere? I get feeding mode, water change, exit mode and clear ato and overheat. My temp ...

So 120 dollars just to look at the status... Well then I really do not recommend buying that unless you're one of those who travels a lot. The wifi is almost completely useless. Wish you would say that in the product description. Yesterday my heater must have overheated so overheat mode kicked in. I...

So I got the wifi attachment and tried to update the code but it tells me I need to use the USB cable. What is the point of the wifi? Is it seriously just for the app to look at your parameters while away? I need to update my code but if I can’t do it through the wifi then I will have to take it all...

I hope you bring it back. I dose 2 part not one part. Part of the appeal is not having to need another outlet. I'm already maxed

Are you still selling this? I don't see it under your products.

Roberto helped me via email. Turned out I had old libraries downloaded on my pc somehow. This was fixed by deleting the folder in my documents and reinstalling. If anyone else has this issue this is the fix! Thanks again Roberto!

Oh I was able to set up the wifi. That's connected. But that's all I can get on the screen.

Wifi set up: Press joystick to continue. When I hit the joystick I get "Status 8131 Already setup. exiting... up"

Nothing happens after this. Joystick does nothing

I've already tried that and the reboot I've tried reinstalling even. Nothing is working, I just get errors. I can't even get to the basics because of this error. I'm stonewalled at this point.

This is hopefully an easy fix but who knows... Just got the Reef Angel today in the mail. Got the wifi attachment with it. I followed the instructions I could find regarding setting the wifi up. I read to use the example code under sketchbook "wifisetup" which I did. I hit the upload butto...

Well I am ready to buy! I had a question on the memory though. wth 32kb.... It seems like everyone who needs more memory needs like 2-5 more kb but the memory after the 32kb is massive by scale. I have a 75 gallon tank with skimmer, 2 LED lamps(built in controllers), 2 powerheads, heater, return pum...