Search found 2587 matches

by binder
Sat Feb 04, 2023 6:14 pm
Forum: Ask anything here
Topic: Anyone selling an RA*
Replies: 1
Views: 2045

Re: Anyone selling an RA*

Are you still looking for the RA* head unit?
by binder
Mon Aug 01, 2022 12:39 pm
Forum: Apps
Topic: Official Arduino Release with Reef Angel Controllers
Replies: 3
Views: 5248

Re: Official Arduino Release with Reef Angel Controllers

Sorry for the delayed response, I do not get on the forum much anymore. The issue is most likely related to old versions of the libraries. There has been some pretty major changes to the libraries over the years and if you had the original Arduino RA app installed, that would install an older versio...
by binder
Wed Jul 07, 2021 3:42 pm
Forum: Standard
Topic: ATOLow Delay
Replies: 8
Views: 6883

Re: ATOLow Delay

you can also look at the libraries and specifically look at the metalhalide function(s). they implement a delay before turning on to limit the power draw at startup. something like that can be implemented, only you will have to use the function call for the ato low switch. Sent from my Pixel 2 using...
by binder
Wed Jul 07, 2021 3:40 pm
Forum: Standard
Topic: ATOLow Delay
Replies: 8
Views: 6883

Re: ATOLow Delay

clw143 wrote:Anyone? Not possible?
almost anything is possible.
are you just using the ato low switch? like once it gets triggered you want a delay of x seconds before the outlet turns on. then you want it to run until when? until it is not triggered?

Sent from my Pixel 2 using Tapatalk
by binder
Mon Jul 05, 2021 6:36 am
Forum: Ask anything here
Topic: Controller issues
Replies: 6
Views: 5659

Re: Controller issues

Having a similar issue. Internal on wifi i can get my parameters but on the website it keeps on saying that connection status: unreachable address. How do i fix it please? please create a separate topic for your issue. your issue sounds like a port forwarding issue. Sent from my Pixel 2 using Tapat...
by binder
Mon Jul 05, 2021 6:33 am
Forum: Ask anything here
Topic: Random click and beep
Replies: 1
Views: 1877

Re: Random click and beep

Please post your code.

Sent from my Pixel 2 using Tapatalk
by binder
Sun Jun 13, 2021 7:17 pm
Forum: How do I code ...
Topic: Adding a new menu
Replies: 3
Views: 3388

Re: Adding a new menu

by binder
Sun Jun 13, 2021 4:53 pm
Forum: How do I code ...
Topic: Adding a new menu
Replies: 3
Views: 3388

Re: Adding a new menu

check out the Custom Menu Generator thread. it's under the Software section and then Apps and the topic is Sticky. I can't link to it from my phone. You would have to create your own menu but can do it.
let me know if you need more help.

Sent from my Pixel 2 using Tapatalk
by binder
Sun May 23, 2021 3:06 pm
Forum: Apps
Topic: Arduino on Windows 10
Replies: 5
Views: 2702

Re: Arduino on Windows 10

I did follow your guide but not 100% sure where I went wrong. I think it started to go wrong at the step "Goto Tools -> CB Reef Angel Process Sketch to run the features and labels generation." I now think this needs to be run before running Sketch > upload ? correct. you just run it befor...
by binder
Sun May 23, 2021 8:37 am
Forum: Apps
Topic: Arduino on Windows 10
Replies: 5
Views: 2702

Re: Arduino on Windows 10

I have another post that handles this topic specifically. https://forum.reefangel.com/viewtopic.php?f=8&t=6978 This eliminates the need to do what you did. It does it all for you (although you do need to choose the menu entry to run it). This is exactly what I do now. I can keep Arduino updated ...
by binder
Fri Apr 30, 2021 5:27 pm
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

howaboutme wrote:this morning was the first scheduled auto calibration. looks like everything went smoothly. thank you!
awesome!
glad to hear that everything appears to be going good.

Sent from my Pixel 2 using Tapatalk
by binder
Sun Apr 25, 2021 2:26 pm
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

looks ok. your changing of the time looks good and it appears that you just copied my code (which is expected).

Sent from my Pixel 2 using Tapatalk
by binder
Sat Apr 24, 2021 12:37 pm
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

Alright, I've been able to do some testing and I think I have something for you. Mind you, I have tested this on a Plus but I do not have it connected to a salinity probe. I've just got it on my desk. In this code, what we have going on is this: at the specified time (24 hour time format), launch Sa...
by binder
Sat Apr 24, 2021 4:54 am
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

just fyi, I haven't forgotten about this topic. I've been thinking about it and looking into the libraries at how it can work. I think I know how to do it but need to get some test code written.

Sent from my Pixel 2 using Tapatalk
by binder
Mon Apr 19, 2021 6:59 am
Forum: How do I code ...
Topic: Noob Question
Replies: 1
Views: 2404

Re: Noob Question

it's just simply c++. there's really no programming required if you use the webwizard.

Sent from my Pixel 2 using Tapatalk
by binder
Wed Apr 14, 2021 7:34 pm
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

I follow with what you are wanting to do. I will have to take a look at the libraries more closely and see what all can be done.
do you have a Star or Plus controller?

Sent from my Pixel 2 using Tapatalk
by binder
Tue Apr 13, 2021 4:47 am
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

so to make sure I follow, you want the calibration to start and let that calibrate for 30 minutes?

Sent from my Pixel 2 using Tapatalk
by binder
Mon Apr 12, 2021 1:04 pm
Forum: How do I code ...
Topic: Auto Calibrate Salinity Probe?
Replies: 15
Views: 9531

Re: Auto Calibrate Salinity Probe?

Kind of a weird request but any way we can have the controller automatically calibrate the salinity probe at a given time? Thanks. well, you could easily trigger the calibration screen but it would still require your interaction. I think it would require some thought to do an auto calibration witho...
by binder
Tue Mar 30, 2021 4:53 am
Forum: Addons
Topic: Can't connect to RA
Replies: 5
Views: 5900

Re: Can't connect to RA

That's interesting about the head unit rebooting a minute later after you issue a command.
Can you post your code?
Maybe Roberto has some suggestions or ideas too.

Sent from my Pixel 2 using Tapatalk
by binder
Sun Mar 28, 2021 6:12 pm
Forum: Addons
Topic: Can't connect to RA
Replies: 5
Views: 5900

Re: Can't connect to RA

To use the serial monitor, you need to connect the cable to your computer and the RA (like you would upload the code). Then, inside Arduino, goto the Tools -> Serial Monitor. That will open a new window. Make sure your baud rate is set to 57600 (I believe that is the baud rate for the the controller...
by binder
Sun Mar 28, 2021 6:25 am
Forum: Addons
Topic: Can't connect to RA
Replies: 5
Views: 5900

Re: Can't connect to RA

your packet capture is showing a 0 byte payload as well. what version of libraries are you using? have you tried to upload code to the controller again? have you tried to connect the controller directly to arduino and run the console/logger and issue commands directly to the controller and look at t...
by binder
Tue Jan 26, 2021 6:54 am
Forum: Standard
Topic: Coding
Replies: 3
Views: 3106

Re: Coding

Looking at your code, you are not initializing SetTime and RiseTime before you try to use them. You have: long SetTime; long RiseTime; Then, the next statement you are trying to use those variables in an IF statement. The values stored in them are "undefined" or whatever else the system de...
by binder
Sat Jan 02, 2021 10:35 am
Forum: You and your tank
Topic: My new 40B setup
Replies: 13
Views: 40080

Re: My new 40B setup

I have 5 ai hydra 26 HDs and 1 ai prime hd. all have to be controlled via their app. not a huge fan of that but their interface is simple and easy (IMO). plus, once configured, i don't have to mess with it.

Sent from my Pixel 2 using Tapatalk
by binder
Tue Dec 22, 2020 12:50 pm
Forum: Ask anything here
Topic: Going to sell my reefangel equipment, need pricing help
Replies: 1
Views: 3218

Re: Going to sell my reefangel equipment, need pricing help

you can try to sell it as a whole, but might have some issues. you may have better luck selling pieces. so, maybe list them all together and say XX for it all or so much for this and that. heck, you may not have much luck selling it either... just really depends. anyways, best of luck trying to sell...
by binder
Sun Nov 01, 2020 7:44 am
Forum: Apps
Topic: Uapp Graph shows no Data to display always.
Replies: 92
Views: 42133

Re: Uapp Graph shows no Data to display always.

I am very confused..... Let me ship you another board and we go from there. PM me your shipping address. Seems good this morning. I went to wake up the screen barely touched it, was unresponsive again.. nd rebooted twice... I'm loosing a bit of faith..... I had my star be randomly unresponsive like...
by binder
Mon Oct 26, 2020 9:41 am
Forum: Standard
Topic: RA Star download firmware failed
Replies: 2
Views: 4652

Re: RA Star download firmware failed

Hey Curt....so you posted this a year ago, and here I am having the same exact issue after installing the code manually (with your valuable assistance). What was your fix for this? I'm working in the portal trying to make label name changes and when I click Save, the controller comes up and says &q...
by binder
Sun Oct 25, 2020 7:40 pm
Forum: For New Members
Topic: Anyone programming from a Mac?
Replies: 35
Views: 21059

Re: Anyone programming from a Mac?

After creating the "update" folder and putting the feature.txt file in it, the output of your tool NOW includes: CBTool v2.0.1 Generating Features file from Reef_Angel_Initial_Setup.ino The following features were automatically added: Watchdog Timer Version Menu The following features wer...
by binder
Sun Oct 25, 2020 5:27 pm
Forum: For New Members
Topic: Anyone programming from a Mac?
Replies: 35
Views: 21059

Re: Anyone programming from a Mac?

Ok. Gonna do a couple more checks. 1. Paste the output of running my tool. It should be something like this: CBTool v2.0.1 Generating Features file from sketch_oct25a.ino The following features were automatically added: Watchdog Timer Version Menu The following features were detected: Relay Expansio...
by binder
Sun Oct 25, 2020 4:09 pm
Forum: For New Members
Topic: Anyone programming from a Mac?
Replies: 35
Views: 21059

Re: Anyone programming from a Mac?

Well, both of those options / codes you posted compile just fine for me. I get no errors when I "verify". Here's the code that I used (from what you posted). #include <Salinity.h> #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_TS.h> #include <RA_TouchLCD.h> #include <RA_...
by binder
Sun Oct 25, 2020 3:46 pm
Forum: For New Members
Topic: Anyone programming from a Mac?
Replies: 35
Views: 21059

Re: Anyone programming from a Mac?

Can you post your current code?