Reef Angel Forum

that did it! all good now, thanks Roberto

thank Roberto, but just to be clear: The three probes are aligned like this: Left (room temp) Middle (Display tank temp-broken) Right (Frag tank temp) from left to right as I look down on the controller. The one that has broken was in the middle. So when I reboot, which one becomes T1 and which one ...

So my temperature probe that goes into the display tank has stopped working, the wires in the part that connects to the controller have broken off. How do I switch the heater control to one of the two other probes? I tried just switching them over but that doesn't work. Do I have to upload new code ...

I want to know this too...why no responses??

old thread, but just this week, this problem fixed itself. Now it works fine, no more flashing of screens. Works just like the day I bought it

no, I can't desolder it. I have never done that before

I have been coping by leaving the screen on the "version" choice off the menu, but other than that the screens flash over and over. Is the only option to by a new head unit or is there some way to fix the joystick?
Thanks

Just last night, my screen on the Reefangel plus is flashing through all the different screens at the speed of light or close to it. No matter what I do, it just keeps cycling through the different screens. The joystick isn't stuck, and I can get the the list of menu options if I push in the joystic...

I removed the line, uploaded the code again. The iphone app connected once and I had all data and labels, then in five minutes I tried to refresh and it keeps saying "unable to process controller data" and all fields are zeros. Same with web uapp. The portal still works, although it shows ...

I did not enter anything in the cloud settings. Are you sure I have it coded correctly at the end of my code, the DDNS line?

the uapp doesn't work either. I can connect thru the portal, and I am using the same ip address in the portal that I am in my iphone app and the uapp. The portal connects, but both my iphone app and the uapp keep saying, "Unable to process controller data". I am using the external ip addre...

My ios app has not worked for months. Months. I have deleted it, reloaded it, reinstalled my code, made sure ip address is correct, and my port is definitely open. Why wont this freaking thing work? I load my name from the forums, add the ip address and the port and do not enter my username or passw...

umm, does this work on a mac? Can't load it on my 2015 macbook air

thanks for resurrecting this> I wound up just not using the tablet for this as I got no replies. I should have thought about this issue before I bought the windows 10 tablet, but live and learn. Doesn't seem that there will be an app made to take care of this. Do you have the cloud attachment? Is th...

No, no bus locks. It's like there was a siphon going on, but the return hose was above the water level of the sump, it wasn't in the water. I am going to check the Tom's aqua lift pump I was using, maybe the diaphram was stuck open?

Well, it happened again, poured two gallons of kalkwasser into the tank before I caught it. Put the whole tank in shock, had to run to the local fish store, buy 25 gallons of water and do an emergency water change. Nothing dead so far, but this ATO will go in the trash.

My ATO is not the expansion, its the the one that came with the RA unit. The valve goes up and down and I do hear the click when the valve is at the prescribed water level. However, the pump isn't shutting off. and then the time out trips, the red light comes on the RA unit, the pump still is runnin...

I use the UApp. thanks I will enter that into my code

How do I shorten feeding mode? It's too long with the code generated from the wizard for me. Sorry if this is obvious, but not for me.. thanks #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #in...

Maybe this has been answered elsewhere but I couldn't find it... we switched cable company, got a new router as a result. I opened port 2000, got the portal to connect to my ip address and at home the portal shows up and works fine. Outside the house, the portal can't connect. The Uapp on my iphone ...

Just sent it again, do you have it now?
Do you think the humidity expansion is working? you say you didn't get any data...

fishflipper:
I pm'd you...

So I switched my code at the end as follows: // This should always be the last line ReefAngel.Portal( "psyrob" ); ReefAngel.DDNS( "psyrob-controller1.myreefangel.com" ); // Your DDNS is psyrob-99.90.0.55:2000.myreefangel.com ReefAngel.ShowInterface(); } and it didn't work at firs...

Well, I'm still not able to connect. I redid my code thru the wizard, and this is what it created: #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaL...

do you mean the ddns name should be in my code, and not the IP and Port? As in this line in the code:

ReefAngel.DDNS( "99.90.0.55:2000" ); // Your DDNS is psyrob-99.90.0.55:2000.myreefangel.com
should really be
ReefAngel.DDNS("psyrob");//

Sorry for the delay, been busy at work: here is my code, note from my banner that the portal is showing data from February... Does this give any answers? Thanks #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include...

spoke too soon: now it is back to february data

Here is what came up. Now, when I check the portal from work, it is current. Could it be only happening from my house, like my router changing the IP? <RA> <ID>psyrob</ID> <T1>811</T1> <T2>784</T2> <T3>807</T3> <PH>800</PH> <R>175</R> <RON>0</RON> <ROFF>246</ROFF> <ATOLOW>0</ATOLOW> <ATOHIGH>0</ATOH...

My portal page keeps showing data from February, when I reload it it shows todays date for a second then goes back to february. Just before it goes back to February, the Connection Status says "Error - 0" for a brief section. My iphone app is current and both are pointing to the same IP ad...

I just got a tablet running windows 10 home. Trying to load the reefangel app, and the microsoft store says the app will not work on this machine, that it is supported for Windows 10 mobile. Is there a way to run the tablet in the mobile operating system or to get the windows app to run on windows 1...