So its been 4-5 years since I was in the hobby.
New computer so my old RA sketch is still loaded onto it. Unfortunately I read on the forum I cant download the sketch from my RA. Not the point of this post but wanted to give the backstory.
Whenever I try and upload I get an error. The drivers appear to be installed correctly (com3 and com4 show up in the menu).
Each time I go to upload the RA blinks a few times but then my old sketch appears and I get an error (see below). Is the programmer wrong? I am simply trying to reset to the factory program. Uploading the example, using the wizard, and using the restore preloaded code all give an error.
avrdude: Version 6.0, compiled on Apr 6 2012 at 19:29:19
Copyright (c) 2000-2005 Brian Dean
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "C:\Program Files (x86)\Reef Angel Controller\hardware/tools/avr/etc/avrdude.conf"
Using Port : \\.\COM4
Using Programmer : stk500v2
Overriding Baud Rate : 115200
Rebooting Reef Angel Controller
avrdude: Send: . [1b] . [01] . [00] . [01] . [0e] . [01] . [14]
avrdude: Recv:
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer
avrdude done. Thank you.
Reef Angel + Not Connecting
-
- Posts: 2
- Joined: Sat Jan 08, 2022 4:27 pm
Re: Reef Angel + Not Connecting
Thanks, I will try a new cable first.
With respect to the head unit, the ability to upload is entirely separate from the functionality working correctly? The RA works perfect with the current sketch I did 5 years ago.
If it is the head unit, what options do I have? Could I send it in to get looked at?
Thanks again for the help.
With respect to the head unit, the ability to upload is entirely separate from the functionality working correctly? The RA works perfect with the current sketch I did 5 years ago.
If it is the head unit, what options do I have? Could I send it in to get looked at?
Thanks again for the help.