Setting Reminders
Re: Setting Reminders
Plus you haven't used wifialert much so it's all good. I figured the chances were low but just wanted to point out the possibility
Re: Setting Reminders
Yeah, I wasn't sure about how it works exactly. I didn't realize those possibilities. Thanks again for feedback.lnevo wrote:Plus you haven't used wifialert much so it's all good. I figured the chances were low but just wanted to point out the possibility
Sent from my Moto X
-
- Posts: 121
- Joined: Fri Jul 03, 2015 8:29 am
Re: Setting Reminders
Thank you both for this!
Just so I'm clear, these alerts are going to alert me through the app? Right? Is there a way to do text messages?
Sent from my SAMSUNG-SM-G900A using Tapatalk
Just so I'm clear, these alerts are going to alert me through the app? Right? Is there a way to do text messages?
Sent from my SAMSUNG-SM-G900A using Tapatalk
Re: Setting Reminders
no. they will be sent through the portal not the app. you will also need the portal(...) line added to your code. then from the portal, you will enter your email address and you can get email messages with these alerts (some carriers have a special email address that sends you a txt message to your phone).fishflipper wrote:Thank you both for this!
Just so I'm clear, these alerts are going to alert me through the app? Right? Is there a way to do text messages?
Sent from my SAMSUNG-SM-G900A using Tapatalk
there is really not a way to do this from the phone except for adding in manual alarms...so that defeats the point of the controller sending the reminders.
Sent from my iPad mini
Re: Setting Reminders
Here are the formats for most of the US services. 《number》is your 10 digit phone number.
AT&T: number@txt.att.net
T-Mobile: number@tmomail.net
Verizon: number@vtext.com
Sprint: number@messaging.sprintpcs.com or number@pm.sprint.com
Virgin Mobile: number@vmobl.com
Tracfone: number@mmst5.tracfone.com
Metro PCS: number@mymetropcs.com
Boost Mobile: number@myboostmobile.com
Cricket: number@sms.mycricket.com
Nextel: number@messaging.nextel.com
Alltel: number@message.alltel.com
Ptel: number@ptel.com
Suncom: number@tms.suncom.com
Qwest: number@qwestmp.com
U.S. Cellular: number@email.uscc.net
AT&T: number@txt.att.net
T-Mobile: number@tmomail.net
Verizon: number@vtext.com
Sprint: number@messaging.sprintpcs.com or number@pm.sprint.com
Virgin Mobile: number@vmobl.com
Tracfone: number@mmst5.tracfone.com
Metro PCS: number@mymetropcs.com
Boost Mobile: number@myboostmobile.com
Cricket: number@sms.mycricket.com
Nextel: number@messaging.nextel.com
Alltel: number@message.alltel.com
Ptel: number@ptel.com
Suncom: number@tms.suncom.com
Qwest: number@qwestmp.com
U.S. Cellular: number@email.uscc.net
-
- Posts: 121
- Joined: Fri Jul 03, 2015 8:29 am
Re: Setting Reminders
Thanks, I would rather have text messages. I didn't think there was a way to do it.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
Re: Setting Reminders
awesome. great list. I knew they existed but didn't know them.
Sent from my Moto X
Sent from my Moto X
Re: Setting Reminders
Hi there
Has anyone got this code up and running, working?. I'm having troubles in trying to get the code to compile.
Has anyone got this code up and running, working?. I'm having troubles in trying to get the code to compile.
Re: Setting Reminders
Hi Inevo
Thanks for your response.
I think my problem is where in my code to add "checkReminders(); in my main loop and also were to add the function.
My code is all from the wizard. except where I tried to add the reminders. I'm a total noob when it comes down to coding. I do have the wifi module , and reef angel plus.
and then the errors
sketch_aug03a.cpp: In function 'void loop()':
sketch_aug03a:86: error: 'checkReminders' was not declared in this scope
sketch_aug03a:91: error: a function-definition is not allowed here before '{' token
sketch_aug03a:101: error: a function-definition is not allowed here before '{' token
sketch_aug03a:145: error: expected `}' at end of input
Thanks for your response.
I think my problem is where in my code to add "checkReminders(); in my main loop and also were to add the function.
My code is all from the wizard. except where I tried to add the reminders. I'm a total noob when it comes down to coding. I do have the wifi module , and reef angel plus.
Code: Select all
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit( Celsius ); // set to Celsius Temperature
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port2Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit | Port5Bit | Port6Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.Relay.DelayedOn( Port1 );
ReefAngel.Relay.DelayedOn( Port2 );
ReefAngel.StandardHeater( Port3 );
ReefAngel.StandardHeater( Port4 );
ReefAngel.ActinicLights( Port5 );
ReefAngel.DayLights( Port6 );
ReefAngel.MoonLights( Port7 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.PWM.SetActinic( MoonPhase() );
ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = AntiSync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here
checkReminders();
////// Place your custom code above here
void checkReminders()
{
// grab the current time and use it for processing the reminders
// do it this way to prevent rollover errors...just in case
time_t t = now();
remindTraceElements(t);
remindWaterChange(t);
remindMonthly(t);
}
void remindTraceElements(time_t t)
{
// Sunday = 1, Monday = 2, etc
if ((weekday(t) == 2) || (weekday(t) == 5)) {
// Every monday and thursday at 10pm
if ((hour(t) == 22) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Add+Trace+Elements");
}
}
}
void remindWaterChange(time_t t)
{
if (weekday() == 4) {
// Every wednesday at 8pm
if ((hour(t) == 20) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Water+Change+Time");
}
}
}
void remindMonthly(time_t t)
{
// Every 1st of the month at 8pm
if (day(t) == 1) {
if ((hour(t) == 20) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Change+filter+pads");
}
}
}
void sendReminder(char* msg)
{
static WifiAlert r;
// No delay, for immediate sending
r.SetDelay(0);
// No spaces are allowed in the msg
r.Send(msg);
}
// This should always be the last line
ReefAngel.Portal( "GreenVF" );
ReefAngel.ShowInterface();
}
and then the errors
sketch_aug03a.cpp: In function 'void loop()':
sketch_aug03a:86: error: 'checkReminders' was not declared in this scope
sketch_aug03a:91: error: a function-definition is not allowed here before '{' token
sketch_aug03a:101: error: a function-definition is not allowed here before '{' token
sketch_aug03a:145: error: expected `}' at end of input
- Attachments
-
- newsetup.ino
- not working code file
- (3.84 KiB) Downloaded 526 times
Re: Setting Reminders
Your code cuts off the closing of the file. You placed all of the code inside the loop when only checkReminders(); needed to be in there. Here's what it should look like:GreenVF wrote:Hi Inevo
Thanks for your response.
I think my problem is where in my code to add "checkReminders(); in my main loop and also were to add the function.
My code is all from the wizard. except where I tried to add the reminders. I'm a total noob when it comes down to coding. I do have the wifi module , and reef angel plus.
and then the errors
sketch_aug03a.cpp: In function 'void loop()':
sketch_aug03a:86: error: 'checkReminders' was not declared in this scope
sketch_aug03a:91: error: a function-definition is not allowed here before '{' token
sketch_aug03a:101: error: a function-definition is not allowed here before '{' token
sketch_aug03a:145: error: expected `}' at end of input
Code: Select all
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit( Celsius ); // set to Celsius Temperature
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port2Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit | Port5Bit | Port6Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.Relay.DelayedOn( Port1 );
ReefAngel.Relay.DelayedOn( Port2 );
ReefAngel.StandardHeater( Port3 );
ReefAngel.StandardHeater( Port4 );
ReefAngel.ActinicLights( Port5 );
ReefAngel.DayLights( Port6 );
ReefAngel.MoonLights( Port7 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.PWM.SetActinic( MoonPhase() );
ReefAngel.DCPump.UseMemory = true;
ReefAngel.DCPump.DaylightChannel = AntiSync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here
checkReminders(); // functions are defined below
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "GreenVF" );
ReefAngel.ShowInterface();
}
// Reminder Code is listed below
void checkReminders()
{
// grab the current time and use it for processing the reminders
// do it this way to prevent rollover errors...just in case
time_t t = now();
remindTraceElements(t);
remindWaterChange(t);
remindMonthly(t);
}
void remindTraceElements(time_t t)
{
// Sunday = 1, Monday = 2, etc
if ((weekday(t) == 2) || (weekday(t) == 5)) {
// Every monday and thursday at 10pm
if ((hour(t) == 22) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Add+Trace+Elements");
}
}
}
void remindWaterChange(time_t t)
{
if (weekday() == 4) {
// Every wednesday at 8pm
if ((hour(t) == 20) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Water+Change+Time");
}
}
}
void remindMonthly(time_t t)
{
// Every 1st of the month at 8pm
if (day(t) == 1) {
if ((hour(t) == 20) && (minute(t) == 0) && (second(t) == 0)) {
// send reminder, No Spaces Allowed in message
sendReminder("Change+filter+pads");
}
}
}
void sendReminder(char* msg)
{
static WifiAlert r;
// No delay, for immediate sending
r.SetDelay(0);
// No spaces are allowed in the msg
r.Send(msg);
}
Re: Setting Reminders
Thank you Binder
Much appreciated. Got it now compiling. I also found a I had a few errors that I managed to sort out.
note to self. case sensitive and I had to include WifiAlert.h file
Here is the completed working code for now.
Much appreciated. Got it now compiling. I also found a I had a few errors that I managed to sort out.
note to self. case sensitive and I had to include WifiAlert.h file
Here is the completed working code for now.
- Attachments
-
- newsetup.ino
- (3.94 KiB) Downloaded 551 times
Re: Setting Reminders
awesome. glad you got it compiling.
yeah, things are case sensitive.
Sent from my iPad mini
yeah, things are case sensitive.
Sent from my iPad mini