DIY Skimmate Locker on the Cheap

Talk about you and your tank/equipment
Post Reply
paperdesk
Posts: 173
Joined: Fri May 23, 2014 8:09 am

Re: DIY Skimmate Locker on the Cheap

Post by paperdesk »

I still haven't found a long stem float switch, but I've had one of these for a while, and if I silicone it in well it should do the trick. http://www.amazon.com/gp/product/B0076U ... UTF8&psc=1
Image
User avatar
jsclownfish
Posts: 378
Joined: Mon Oct 24, 2011 7:52 pm
Location: Saint Louis

Re: DIY Skimmate Locker on the Cheap

Post by jsclownfish »

nice. I've been wanting to put a reservoir signal in my top off water jug forever, but couldn't figure out how to get a long enough float towards the bottom of the reservoir. The silicone seal on the bottom makes me a bit nervous, but a tight seal with a layer of silicone should hold.

-Jon
User avatar
jsclownfish
Posts: 378
Joined: Mon Oct 24, 2011 7:52 pm
Location: Saint Louis

Re: DIY Skimmate Locker on the Cheap

Post by jsclownfish »

nice. I've been wanting to put a reservoir signal in my top off water jug forever, but couldn't figure out how to get a long enough float towards the bottom of the reservoir. The silicone seal on the bottom makes me a bit nervous, but a tight seal with a layer of silicone should hold.

-Jon
modulok
Posts: 166
Joined: Wed Oct 24, 2012 8:37 am

Re: DIY Skimmate Locker on the Cheap

Post by modulok »

I have the same container, but I am using it horizontally and punched holes through the white cap.
I will post a picture later.
Image
modulok
Posts: 166
Joined: Wed Oct 24, 2012 8:37 am

Re: DIY Skimmate Locker on the Cheap

Post by modulok »

I haven't had to empty a full container yet, but I'm hoping to use the lever on the bottom.

Photo attached.

Image

Sent from my A0001 using Tapatalk
Last edited by modulok on Sat Jun 18, 2016 6:12 am, edited 1 time in total.
Image
User avatar
cosmith71
Posts: 1437
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: DIY Skimmate Locker on the Cheap

Post by cosmith71 »

Looks great!
Post Reply