Help to new USB - TTL

Basic / Standard Reef Angel hardware
Post Reply
tafarifilho
Posts: 5
Joined: Wed Dec 31, 2014 9:23 am

Help to new USB - TTL

Post by tafarifilho »

Hi.

I lost my USB cable. I'm from Brazil, and 55$ only for shipping, is very expensive.

The board is v 6.1

And the Ftdi Ft232r Adapter Ttl to Arduino Mini Esp8266

Could someone help me order the wiring?

Tks.
Attachments
Image
Image
ezgif.com-webp-to-jpg.jpg (66.26 KiB) Viewed 7768 times
Image
Image
20190504_124128.jpg (346.33 KiB) Viewed 7768 times
Image
Image
20190504_122745.jpg (312.43 KiB) Viewed 7768 times
tafarifilho
Posts: 5
Joined: Wed Dec 31, 2014 9:23 am

Re: Help to new USB - TTL

Post by tafarifilho »

This site is valid?

https://upverter. com/reefangel/
tafarifilho
Posts: 5
Joined: Wed Dec 31, 2014 9:23 am

Re: Help to new USB - TTL

Post by tafarifilho »

Is this connection correct?
Attachments
Image
Image
ReefAngel.png (871.11 KiB) Viewed 7752 times
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Help to new USB - TTL

Post by rimai »

Yes.
Roberto.
tafarifilho
Posts: 5
Joined: Wed Dec 31, 2014 9:23 am

Re: Help to new USB - TTL

Post by tafarifilho »

Roberto, Thanks for the answer.

But... :)

The wires are connected as I said above. (See the picture).

In Arduino 1.0.1, I chose "Reef Angel Controller" motherboard.
Serial Port: COM3.

When I try to compile and upload CustomMainScreen_AquaIllumination, for test, i received the error:

stk500_getsync(): not in sync: resp=0x12


Thank you for all the help you get.
Attachments
Error
Error
20190506_000809.jpg (155.35 KiB) Viewed 7739 times
Wires
Wires
20190506_000530.jpg (254.56 KiB) Viewed 7739 times
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Help to new USB - TTL

Post by rimai »

Sorry....
Actually it is GND-X-X-TX-RX-RTS or DTR
https://learn.sparkfun.com/tutorials/sp ... -guide/all
Roberto.
tafarifilho
Posts: 5
Joined: Wed Dec 31, 2014 9:23 am

Re: Help to new USB - TTL

Post by tafarifilho »

After much pain in trying to manually mount the cable, I gave up and bought a new cable on the site.

But, and there is always a "but" ...

The new USB-TTL Converter Cable does not work or I do not know how to get it to work.

What is the correct way to connect it?
Attachments
20190605_014448.jpg
20190605_014448.jpg (202.39 KiB) Viewed 7643 times
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Help to new USB - TTL

Post by rimai »

Look in the manual.
Roberto.
Post Reply