RA* temp sensors

Basic / Standard Reef Angel hardware
Post Reply
tngo
Posts: 131
Joined: Wed Apr 27, 2011 9:08 am

RA* temp sensors

Post by tngo »

Hi.

All of my temperature sensors on the RA* are suddenly reading zeros. I tried to reboot and reflash firmware but still no response from any of the temperature sensors. I have one temperature sensor sitting in air to read room temperature so I'm not sure why that would go bad, the other 2 are submersed in the tank and sump. What would be the best way to troubleshoot this?

Thanks,
Tim
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: RA* temp sensors

Post by rimai »

Connect just one at a time to find the culprit
Roberto.
tngo
Posts: 131
Joined: Wed Apr 27, 2011 9:08 am

Re: RA* temp sensors

Post by tngo »

Ok. Will try that later today.

Thanks
Roberto.
tngo
Posts: 131
Joined: Wed Apr 27, 2011 9:08 am

Re: RA* temp sensors

Post by tngo »

Tried what you suggested and found the bad temperature sensor. Everything is working normally now.

Thanks.
Tim
Post Reply