PH Won't Read on Star

Basic / Standard Reef Angel hardware
Post Reply
User avatar
brennyn21
Posts: 70
Joined: Mon Nov 23, 2020 5:40 pm

PH Won't Read on Star

Post by brennyn21 »

So randomly my Reef Angel Star quit reading PH accurately. I went to go recalibrate it because this is often the issue and for both ph solutions it reads 0. I replaced my probe with a brand new one I had laying around and the same issue occurred. The star has 0 water damager and I did pull it apart to verify solder connections and everything looks brand new. I tried reuploading the code and a full power reboot and still had the same result.
Sincerely, Brennyn
User avatar
brennyn21
Posts: 70
Joined: Mon Nov 23, 2020 5:40 pm

Re: PH Won't Read on Star

Post by brennyn21 »

Trouble shooted a bit more still no luck. Is there anything else I could give a try?
Sincerely, Brennyn
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: PH Won't Read on Star

Post by rimai »

I would start by unplugging everything and start plugging one at a time.
Roberto.
Post Reply