Hi All,

I dont know if this is still supported or if I need the new cloud module but I have a old RA+ with the old wifi module that does send data to the Portal, I havent setup NAT to the RA from the Net as I only care about historical info.

On the portal it shows all the potential modules and expansion relay boxes but i only have/use one relay box, 2 temp sensors and an RF module and old wifi module but the portal shows everything.

Can someone tell me what I need to do to stop the portal showing equipment I dont have, assuming its possible/sitll supported?

Thanks

Andrew

If you have the module in your code, it will show up on the portal. Can you post your code?

Here is my code. Please ignore the messynees

I thiought it would be related to the include bits so tried commenting somebits out.

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <RF.h>
#include <ReefAngel.h>


//#include <RA_ATO.h>
//#include <Wire.h>
//#include <OneWire.h>
//#include <RA_PWM.h>
//#include <Salinity.h>
//#include <IO.h>
//#include <ORP.h>
//#include <AI.h>
//#include <DCPump.h>


////// Place global variable code below here
// Globals Needed for RF Mode on Custom Main
byte vtechmode;   
byte vtechspeed;
byte vtechpercent;
boolean bFeeding=false;

byte x = 6;
byte y = 2;
byte t;
char text[7];

//Custom Main, Graph & Menu

void DrawCustomMain()
{
  //      ReefAngel.LCD.DrawDate(6, 2);
  ReefAngel.LCD.DrawText(3,255,6,2," Reef of Low");

  ReefAngel.LCD.DrawDate(7, 120);
  ReefAngel.LCD.Clear(COLOR_BLACK, 1, 11, 132, 11);
  pingSerial();

  /*
      ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 6, 90, "--------------------");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 6, 126, "--------------------");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 2, 93, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 2, 103, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 2, 113, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 2, 123, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 126, 93, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 126, 103, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 126, 113, "|");
   ReefAngel.LCD.DrawText(COLOR_TOMATO,255, 126, 123, "|");
   */


  vtechmode=ReefAngel.RF.Mode;
  vtechspeed=ReefAngel.RF.Speed;
  vtechpercent=ReefAngel.RF.Duration;

  ReefAngel.LCD.Clear(255, 35, 20, 20, 85);

  ReefAngel.LCD.DrawText(0,255,18,21,"EcoSmart Mode");
  if (vtechmode == 0) ReefAngel.LCD.DrawLargeText(COLOR_LIMEGREEN,255,25,31,"Constant");
  else if(vtechmode == 1) ReefAngel.LCD.DrawLargeText(COLOR_GOLD,255,25,31,"Lagoonal");
  else if (vtechmode == 2) ReefAngel.LCD.DrawLargeText(COLOR_GOLD,255,25,31,"Reef Crest");
  else if (vtechmode == 3) ReefAngel.LCD.DrawLargeText(COLOR_CORNFLOWERBLUE,255,25,31,"Short Pulse");
  else if (vtechmode == 4) ReefAngel.LCD.DrawLargeText(COLOR_PINK,255,25,31,"Long Pulse");
  else if (vtechmode == 5) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,25,31,"STM_NTM.");
  else if (vtechmode == 6) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,25,31,"Tidal Swell");
  else if (vtechmode == 9) ReefAngel.LCD.DrawLargeText(COLOR_WHITE,0,45,31,"Night");
  //
  char text[10];

  ReefAngel.LCD.DrawText(2,255,32,42,"Speed");
  ConvertNumToString(text, vtechspeed, 1);
  if (vtechspeed )ReefAngel.LCD.DrawLargeText(0,255,35,51,text);

  ReefAngel.LCD.DrawText(23,255,32,62,"Duration");
  ConvertNumToString(text, vtechpercent, 1);
  if (vtechpercent) ReefAngel.LCD.DrawLargeText(0,255,35,70,text);
  //   
  ReefAngel.LCD.DrawText(0,255,10,80,"T1");
  ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(COLOR_BLACK, 255, 10, 88, text, Num8x8);
  pingSerial();

 ReefAngel.LCD.DrawText(0,255,50,80,"T2");
  ConvertNumToString(text, ReefAngel.Params.Temp[T2_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(COLOR_BLACK, 255, 50, 88, text, Num8x8);
  pingSerial();
 
  ReefAngel.LCD.DrawText(0,255,100,80,"pH");
  ConvertNumToString(text, ReefAngel.Params.PH, 100);
  ReefAngel.LCD.DrawLargeText(COLOR_INDIGO, 255, 85, 88, text, Num8x8);
  pingSerial();
  //
  pingSerial();
  byte TempRelay = ReefAngel.Relay.RelayData;
  TempRelay &= ReefAngel.Relay.RelayMaskOff;
  TempRelay |= ReefAngel.Relay.RelayMaskOn;
  ReefAngel.LCD.DrawOutletBox(12, 100, TempRelay);
  //
}
void DrawCustomGraph()
{
}


////// Place global variable code above here


void setup()
{
  // This must be the first line
  ReefAngel.Init();  //Initialize controller
  ReefAngel.SetTemperatureUnit( Celsius );  // set to Celsius Temperature

  // Ports toggled in Feeding Mode
  ReefAngel.FeedingModePorts = Port4Bit; //| Port6Bit | Port7Bit;
  // Ports toggled in Water Change Mode
  // ReefAngel.WaterChangePorts = Port4Bit | Port7Bit;
  // Ports toggled when Lights On / Off menu entry selected
  ReefAngel.LightsOnPorts = 0;
  // Ports turned off when Overheat temperature exceeded
  ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit;
  // Use T1 probe as temperature and overheat functions
  ReefAngel.TempProbe = T1_PROBE;
  ReefAngel.OverheatProbe = T1_PROBE;
  // Set the Overheat temperature setting
  InternalMemory.OverheatTemp_write( 290 );



 


  // Ports that are always on
  ReefAngel.Relay.On( Port5 ); //MP40
  ReefAngel.Relay.On( Port6 ); //MP40
  ReefAngel.Relay.On( Port7 ); //Return
//ReefAngel.Relay.On( Port8 ); Used By CALC RX Below

  ReefAngel.DCPump.FeedingSpeed=100;
 
  ReefAngel.Timer[FEEDING_TIMER].SetInterval(2100);

  //   if (!ReefAngel.HighATO.IsActive()) ReefAngel.Relay.Off(Port7); // Turn Skimmer off if Return is off and water level increases in sump
    //    ReefAngel.Relay.Set(Port7,ReefAngel.LowATO.IsActive()); // Turn Skimmer on if Return is on and water level in the sump is norma


  ////// Place additional initialization code below here


  ////// Place additional initialization code above here
}

void loop()
{
  ReefAngel.StandardHeater( Port1,240,248 );
  ReefAngel.StandardHeater( Port2,240,248 );
  //    ReefAngel.StandardFan( Port3,271,281 );
  //    ReefAngel.StandardLights( Port3,20,0,5,0 );
  //    ReefAngel.StandardLights( Port6,20,0,0,0 );
 
  ReefAngel.StandardLights( Port4,8,0,23,59 );   //SKIMMER 8 am to 23:59
//
//  ReefAngel.StandardLights( Port5,7,0,1,0 );   //MP40 7 am to 2 am
//  ReefAngel.StandardLights( Port6,7,0,1,0 );   //MP40 7 am to 2 am


//if (hour(now())<16)
//  ReefAngel.StandardLights( Port4,8,0,15,0 ); // Skimmer on from 8am to 3pm then off till 4pm
//else
//  ReefAngel.StandardLights( Port4,16,0,23,45 ); // Skimmer on from 4pm to 11:45pm then off till 8am


 
//  ReefAngel.StandardLights( Port5,19,0,9,0 );   
  //    ReefAngel.DosingPumpRepeat( Port8,0,180,30);
//  ReefAngel.CO2Control ( Port8,650,670 ); //was 630 - 640
//  ReefAngel.DosingPumpRepeat( Port3,0,180,180);
  ////
  ReefAngel.RF.UseMemory = false;
  ///////
  //    ReefAngel.RF.SetMode(Constant,80,5);
  //    ReefAngel.RF.SetMode(Random2,50,5);
  //    ReefAngel.RF.SetMode(Smart_NTM,50,10);
  //    ReefAngel.RF.SetMode(Smart_NTM,60,8);
  //    ReefAngel.RF.SetMode(Custom,30,0); //Custom Mode Sync
  //    ReefAngel.RF.SetMode(Custom,50,1); //Custom Mode Anti-Sync
  //    ReefAngel.RF.SetMode(Custom,50,2); //Custome Mode Back of tank


///////    CHANGE Vortech MODE @ TIMES

    if ( ReefAngel.RF.Mode != Feeding_Start)

    if (hour()==10)
      ReefAngel.RF.SetMode(Lagoon,50,4);

  //  if (hour()==10)
   //   ReefAngel.RF.SetMode(Constant,70,4);
  //
    else if (hour()>=0 && hour()<3)
      ReefAngel.RF.SetMode(Lagoon,20,2);           

else if (hour()>=3 && hour()<6)
      ReefAngel.RF.SetMode(Lagoon,10,2);           
         
else if (hour()>=6 && hour()<9)
     ReefAngel.RF.SetMode(ReefCrest,30,10);   

else if (hour()>=9 && hour()<12)
     ReefAngel.RF.SetMode(ReefCrest,40,60);

// else if (hour()>=9 && hour()<12)
  //   ReefAngel.RF.SetMode(Constant,60,4);   
                       
else if (hour()>=12 && hour()<13)
     ReefAngel.RF.SetMode(Constant,60,4);

   else if (hour()>=13 && hour()<20)
      ReefAngel.RF.SetMode(Lagoon,50,14);

// else if (hour()>=13 && hour()<18)
  //   ReefAngel.RF.SetMode(Smart_TSM,80,5);

// else if (hour()>=13 && hour()<18)
  //   ReefAngel.RF.SetMode(Constant,80,4);   
 
//    else if (hour()>=18 && hour()<20)
//      ReefAngel.RF.SetMode(Smart_NTM,50,20);

    else if (hour()>=20 && hour()<21)
      ReefAngel.RF.SetMode(Constant,60,4);   

    else if (hour()>=21 && hour()<22)
      ReefAngel.RF.SetMode(Lagoon,70,5);           

   else if (hour()>=22 && hour()<23)
      ReefAngel.RF.SetMode(Constant,70,4);

    else if (hour()>=23 && hour()<0)
      ReefAngel.RF.SetMode(Lagoon,50,5);           

    else
      ReefAngel.RF.SetMode(Constant,40,3);

if ( ReefAngel.RF.Mode != Feeding_Start)

if (ReefAngel.DisplayedMenu==WATERCHANGE_MODE) ReefAngel.RF.SetMode(Constant,80,5);

  ////// Place your custom code below here

  //    ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 60% +/- 20% on sync mode
  //    ReefAngel.PWM.SetDaylight( NutrientTransportMode(80,100,10,true) );

//  if (hour()>=8 && hour()<10)
//    ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,10,true) ); // Long pulse at 40% with 10s pulse on sync mode

//    else if (hour()>=10 && hour()<16)
//    ReefAngel.PWM.SetDaylight( NutrientTransportMode(75,90,2000,true) ); // Nutrient Transport on sync mode

//    else if (hour()>=16 && hour()<17)
//    ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 75% + - 20 on sync mode

//    else if (hour()>=17 && hour()<20)
//    ReefAngel.PWM.SetDaylight( LongPulseMode(0,60,4,true) );
  //  ReefAngel.PWM.SetDaylight( NutrientTransportMode(75,90,2000,true) ); // Nutrient Transport on sync mode


//    else if (hour()>=20 && hour()<24)
//    ReefAngel.PWM.SetDaylight( TidalSwellMode(60,true) ); // Tidal Swell at 60% on sync mode

//    else
//    ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,10,true) ); // Long pulse at 40% with 10s pulse on sync mode



    ////// Place your custom code above here

    // This should always be the last line
  //ReefAngel.Network.WifiAuthentication("appleseed:sdiuhfrweuWdwe");
  ReefAngel.Portal("Appleseed","");
  ReefAngel.ShowInterface();
}


What are you trying to hide on the portal?

at the moment the portal shows the following which i would like to hide

Humidity,
PWM channels,
Salinity,
ORP
PH Exp
PAR
8 extra relay boxes
Radion
Aqua Illumination stuff
I/O expansion module
Water level expansion modules
Custom Fields

It may be a problem with the page then. Let me look into it.

Thanks!

Which browser are you using?
I don't see nothing wrong.

I use mostly Firefox, but the issue also occurs with chrome, brave and edge. I tried chrome on android and have the same issue.
Its not the end of the world as I only goto the portal for the relay activity section.

Thanks