lnevo wrote:What memory location are you trying to change that isn't working and you need to reboot?
Both 220&221 would not reflect the change last night.
I am currently working with 220 (PWMDaytime). I am now up to 70% its running nice. Im not sure I want to go more
![Smile :)](./images/smilies/icon_e_smile.gif)
but ofcourse i will! Yeah, Just pushed it to 100. Its a nice pump! no water on my floor, crazy flow in the tank! Ill prob run it around 50 with a 30ish duration! sweet thing is I should be able to tune it up via the portal (once I tie the modes in) correct? Lee did reefcrest for an example, I think I get what I should do:
Portal-Internal Memory-RF-Tidal Wave/ strength 50/ duration 30
NOW this goes AFTER LAST }
//Tidal Swell
byte TidalSwellMode(byte WaveMaxSpeed, boolean PulseSync)
{
static unsigned long lastwavemillis=millis();
static byte WavePhase=0;
static time_t WaveStart=0;
static byte speed=0;
static byte anti_speed=0;
if (WavePhase==0)
{
WavePhase++;
WaveStart=now();
}
else if (WavePhase==1)
{
if (now()-WaveStart>900) WavePhase++;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,0,900,0,90))))/10;
speed+=WaveMaxSpeed/2;
anti_speed=(WaveMaxSpeed*2*sin(radians(map(now()-WaveStart,0,900,0,90))))/5;
anti_speed+=WaveMaxSpeed/2;
}
else if (WavePhase==2)
{
if (now()-WaveStart>1800) WavePhase++;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,900,1800,90,180))))/20;
speed+=WaveMaxSpeed/2;
speed+=WaveMaxSpeed/20;
anti_speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,900,1800,90,180))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=WaveMaxSpeed/4;
}
else if (WavePhase==3)
{
if (now()-WaveStart>2700) WavePhase++;
speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,1800,2700,0,90))))/20;
speed+=WaveMaxSpeed/2;
speed+=WaveMaxSpeed/20;
anti_speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,1800,2700,0,90))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=WaveMaxSpeed/4;
}
else if (WavePhase==4)
{
if (now()-WaveStart>3600) WavePhase++;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,2700,3600,90,180))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*3)/20;
anti_speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,2700,3600,90,180))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=(WaveMaxSpeed*3)/20;
}
else if (WavePhase==5)
{
if (now()-WaveStart>4500) WavePhase++;
speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,3600,4500,0,90))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*3)/20;
anti_speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,3600,4500,0,90))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=(WaveMaxSpeed*3)/20;
}
else if (WavePhase==6)
{
if (now()-WaveStart>5400) WavePhase++;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,4500,5400,90,180))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*5)/20;
anti_speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,4500,5400,90,180))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=WaveMaxSpeed/20;
}
else if (WavePhase==7)
{
if (now()-WaveStart>6300) WavePhase++;
speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,5400,6300,0,90))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*5)/20;
anti_speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,5400,6300,0,90))))/20;
anti_speed+=WaveMaxSpeed/2;
anti_speed+=WaveMaxSpeed/20;
}
else if (WavePhase==8)
{
if (now()-WaveStart>7200) WavePhase++;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,6300,7200,90,180))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*7)/20;
anti_speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,6300,7200,90,180))))/10;
anti_speed+=WaveMaxSpeed/2;
}
else if (WavePhase==9)
{
if (now()-WaveStart>8100) WavePhase++;
speed=(WaveMaxSpeed*3*sin(radians(map(now()-WaveStart,7200,8100,0,90))))/20;
speed+=WaveMaxSpeed/2;
speed+=(WaveMaxSpeed*7)/20;
anti_speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,7200,8100,0,90))))/2;
anti_speed+=WaveMaxSpeed/2;
}
else if (WavePhase==10)
{
if (now()-WaveStart>9000) WavePhase=0;
speed=(WaveMaxSpeed*sin(radians(map(now()-WaveStart,8100,9000,90,180))))/2;
speed+=WaveMaxSpeed/2;
anti_speed=speed;
}
if (PulseSync)
return speed;
else
return anti_speed;
}
THEN THIS GOES IN VOID LOOP
//Tidal Swell
int mode=InternalMemory.RFMode_read();
int speed=InternalMemory.RFSpeed_read();
int duration=InternalMemory.RFDuration_read();
if (mode=Tidal Swell) {
ReefAngel.PWM.SetDaylight( TidalSwellMode(speed,duration) );
} else if (mode=...
...
}
Is that remotely close???