Reef Angel Forum

Code: Select all

   ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "ReEfnWrX" );
    ReefAngel.ShowInterface();
}

Code: Select all

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
< 
< FL#    SIZ   FLAGS
<   2  86328   3 wifly-GSX-400  
<   4  74920   3 web_app-GSX-106  
<   7  46632   3 wps_app-GSX-131  
<   9  66240   3 eap_app-GSX-101  
<  11  37282   0 web_config.html  
<  21    512   0 link.html  
<  22   7268   0 logo.png  
<  24   1052  10 config  
<  25  88548   3 wifly-GSX-441-r1057  
<  26   1052  10 user  
< 
< 145 Free, Boot=25, Backup=2
< <4.41> 
> load user
< load user
< AOK
< <4.41> 
> save
< save
< Storing in config
< <4.41> 
> save
< save
< Storing in config
< <4.41> 
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41> 
> set w l 5
< set w l 5
< AOK
< <4.41> 
> set w s **********
< set w s **********
< AOK
< <4.41> 
> set w p **************
< set w p **************
< AOK
< <4.41> 
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41> 
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41> 
> save
< save
< Storing in config
< <4.41> 
> reboot
< reboot
> $$$
< CMD
> show n
< show n
< SSid=NETGEAR36
< Chan=6
< Assoc=OK
< Rate=12, 24Mb
< Auth=OK
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=1
< <4.41> 
> get i
< get i
< IF=UP
< DHCP=ON
< IP=0.0.0.0:2000
< NM=0.0.0.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41> 
> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------

If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.

Found router NETGEAR DGN2200v3 Router

Port 2000 is now being forwarded to 0.0.0.0