Reef Angel Forum

TanksNStuff wrote:Roger that. Is there a post somewhere showing what new goodies are planned for this next big release?

• Inclusion of ALL (yes, I said ALL) currently available features, in a check-able list
• Ability to Save only the features file to update it if necessary
• Compatibility with Arduino 1.0 (handled with a new library release, 0.9.0)
• Change of PDE tab to be Main Relay
• Folder locations are preset and fixed (for arduino, sketch and library folders)
• Moved Wavemakers to default on Ports 5 & 6 respectively, as the relay box is designed for this
• Development libraries mode is the default. Standard libraries still exist but are discouraged.
• A "Show Installed Libraries" box to display what the library version is that RAGen finds and is using.

TanksNStuff wrote:Wow! That is a big update/improvement list.

Did the Arduino 1.0 release delay the RAGen release? Or was some of the new features added as a result of Arduino 1.0?

If you could add the customization of the expansion relay boxes to this, there wouldn't be much more I would ask for! Big thumbs up Curt.

// Autogenerated file by RAGen (v1.2.1.158), (03/23/2012 20:25)
// Memory_032312_2025.ino
//
// This file sets the default values to the Internal Memory
//


#include <ReefAngel_Features.h>
#include <Globals.h>
#include <Time.h>
#include <OneWire.h>
#include <RA_NokiaLCD.h>
#include <avr/pgmspace.h>
#include <InternalEEPROM.h>
#include <Wire.h>
#include <Memory.h>


RA_NokiaLCD e;

void setup()
{
    e.Init();
    e.Clear(COLOR_WHITE,0,0,132,132);
    e.BacklightOn();

    InternalMemory.MHOnHour_write(8);
    InternalMemory.MHOnMinute_write(0);
    InternalMemory.MHOffHour_write(15);
    InternalMemory.MHOffMinute_write(0);
    InternalMemory.MHDelay_write(5);
    InternalMemory.StdLightsOnHour_write(8);
    InternalMemory.StdLightsOnMinute_write(0);
    InternalMemory.StdLightsOffHour_write(15);
    InternalMemory.StdLightsOffMinute_write(0);
    InternalMemory.DP1OnHour_write(20);
    InternalMemory.DP1OnMinute_write(0);
    InternalMemory.DP2OnHour_write(22);
    InternalMemory.DP2OnMinute_write(30);
    InternalMemory.DP1Timer_write(10);
    InternalMemory.DP2Timer_write(10);
    InternalMemory.DP1RepeatInterval_write(60);
    InternalMemory.DP2RepeatInterval_write(60);
    InternalMemory.ATOTimeout_write(60);
    InternalMemory.ATOHighTimeout_write(60);
    InternalMemory.ATOHourInterval_write(0);
    InternalMemory.ATOHighHourInterval_write(0);
    InternalMemory.FeedingTimer_write(900);
    InternalMemory.LCDTimer_write(600);
    InternalMemory.LEDPWMActinic_write(49);
    InternalMemory.LEDPWMDaylight_write(50);
    InternalMemory.WM1Timer_write(200);
    InternalMemory.WM2Timer_write(354);
    InternalMemory.HeaterTempOn_write(780);
    InternalMemory.HeaterTempOff_write(791);
    InternalMemory.ChillerTempOn_write(810);
    InternalMemory.ChillerTempOff_write(785);
    InternalMemory.OverheatTemp_write(850);
    InternalMemory.PHMax_write(840);
    InternalMemory.PHMin_write(550);
    InternalMemory.SalMax_write(2550);
    InternalMemory.RFMode_write(Constant);
    InternalMemory.RFSpeed_write(140);
    InternalMemory.RFDuration_write(8);
    InternalMemory.RFDuration_write(8);
    InternalMemory.PWMSlopeStartD_write(15);
    InternalMemory.PWMSlopeEndD_write(128);
    InternalMemory.PWMSlopeDurationD_write(60);
    InternalMemory.PWMSlopeStartA_write(15);
    InternalMemory.PWMSlopeEndA_write(128);
    InternalMemory.PWMSlopeDurationA_write(60);
    InternalMemory.IMCheck_write(0x5241494D);
}

void loop()
{
    // display success screen
    e.DrawText(COLOR_BLACK, COLOR_WHITE, MENU_START_COL, MENU_START_ROW*2, "Internal Memory Set");
    e.DrawText(COLOR_BLACK, COLOR_WHITE, MENU_START_COL, MENU_START_ROW*4, "Now load your");
    e.DrawText(COLOR_BLACK, COLOR_WHITE, MENU_START_COL, MENU_START_ROW*5, " RA code file");
    delay(5000);
}

Snowmansnow wrote:Does this work on iOS