Reef Angel Forum

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here
#include <avr/pgmspace.h>
prog_char menu0_label[] PROGMEM = "Feeding";
prog_char menu1_label[] PROGMEM = "Water Change";
prog_char menu2_label[] PROGMEM = "ATO Clear";
prog_char menu3_label[] PROGMEM = "Clear Overheat";
prog_char menu4_label[] PROGMEM = "Fuge Lights";
prog_char menu5_label[] PROGMEM = "PH Calibration";
PROGMEM const char *menu_items[] = {
menu0_label, menu1_label, menu2_label, menu3_label, menu4_label, menu5_label  };

void MenuEntry1()
{
ReefAngel.FeedingModeStart();

}
void MenuEntry2()
{
;ReefAngel.WaterChangeModeStart();


}
void MenuEntry3()
{
ReefAngel.ATOClear();

}
void MenuEntry4()
{
ReefAngel.OverheatClear();

}
void MenuEntry5()
{
ReefAngel.Relay.Override(Port7, ReefAngel.Relay.Status(Port7)+1);
  ReefAngel.DisplayedMenu = RETURN_MAIN_MODE;


}
void MenuEntry6()
{
ReefAngel.SetupCalibratePH();
ReefAngel.DisplayedMenu = ALT_SCREEN_MODE;

}

////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.InitMenu(pgm_read_word(&(menu_items[0])),SIZE(menu_items));

    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port2Bit | Port5Bit | Port6Bit;
    ReefAngel.FeedingModePortsE[0] = Port1Bit | Port2Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port3Bit | Port5Bit | Port6Bit;
    ReefAngel.WaterChangePortsE[0] = Port1Bit | Port2Bit | Port3Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port7Bit | Port8Bit;
    ReefAngel.LightsOnPortsE[0] = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit | Port7Bit | Port8Bit;
    ReefAngel.OverheatShutoffPortsE[0] = Port2Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 830 );
    
    
    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;


    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port2 );
    ReefAngel.Relay.On( Box1_Port4 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardHeater( Port3,775,780 );
    ReefAngel.StandardLights( Port4,9,0,21,0 );
    ReefAngel.StandardLights( Port7,21,0,9,0 );
    ReefAngel.StandardLights( Port8,10,0,20,0 );
    ReefAngel.StandardATO( Box1_Port1,600 );
    ReefAngel.StandardLights( Box1_Port2,1,0,13,0 );
    ReefAngel.StandardFan( Box1_Port3,785,790 );
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( ReefCrest,70,25 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
    
    ////// Place your custom code below here

if (ReefAngel.LowATO.IsActive())
{
  ReefAngel.DosingPumpRepeat(Box1_Port1,0,10,60);
}  
else
{
  ReefAngel.Relay.Off(Box1_Port1);
}  
    
    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
    int x,y;
    char text[10];
    
    // "Sammy's Reef"
    ReefAngel.LCD.DrawLargeText (12, 255,18,8,"Sammy's Reef");
    
    // Salinity Display
    ReefAngel.LCD.DrawLargeText(0,255,15,30,"Salt");
    ReefAngel.LCD.DrawLargeText(2,255,15,40,"1.025");  //(Delete this line when sensor is installed)
    //ConvertNumToString(text,ReefAngel.Params.Salinity, 1000); (add this line when sensor is installed)
    //ReefAngel.LCD.DrawLargeText(COLOR_BLUE,255,15,40,text,Num8x8); (add this line when sensor is installed)
    pingSerial();
    
    // Water Level Display
    /// To be added when expansion is purchased
    
    // Left Power Head Display (Actinic)
    ReefAngel.LCD.DrawLargeText (0,255,15,50,"L Wave");
    ReefAngel.LCD.DrawSingleMonitor(ReefAngel.PWM.GetDaylightValue(),COLOR_BLUE,15,60,1);
    pingSerial();
    
    //Right Power Head Display (Daylight)
    ReefAngel.LCD.DrawLargeText (0,255,75,50,"R Wave");
    ReefAngel.LCD.DrawSingleMonitor(ReefAngel.PWM.GetActinicValue(),COLOR_BLUE, 75, 60, 1); //<Color, Pos From Right, Pos From Top, Decimal Placement>
    pingSerial(); 

    // Temperature Display
    ReefAngel.LCD.DrawLargeText(0,255,15,70,"Temp");
    ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
    ReefAngel.LCD.DrawLargeText(COLOR_BLUE, 255, 15, 80, text, Num8x8);
    pingSerial();

    // PH Display
    ReefAngel.LCD.DrawLargeText(0,255,75,70,"pH");
    ConvertNumToString(text, ReefAngel.Params.PH, 100);
    ReefAngel.LCD.DrawLargeText(COLOR_BLUE, 255, 75, 80, text, Num8x8);
    pingSerial();
   
    

    // Main Relay Box
    byte TempRelay = ReefAngel.Relay.RelayData;
    TempRelay &= ReefAngel.Relay.RelayMaskOff;
    TempRelay |= ReefAngel.Relay.RelayMaskOn;
    ReefAngel.LCD.DrawOutletBox( 12, 93, TempRelay );
    pingSerial();

    // Relay Expansion
    TempRelay = ReefAngel.Relay.RelayDataE[0];
    TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
    TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
    ReefAngel.LCD.DrawOutletBox( 12, 107, TempRelay );
    pingSerial();

    // Date and Time
    ReefAngel.LCD.DrawDate( 6, 122 );
    pingSerial();
}

void DrawCustomGraph()
{
}