Reef Angel Forum

Code: Select all

digitalWrite(highATOPin,LOW);

Code: Select all

void loop()
{


  // Your code goes above here
  if (!digitalRead(highATOPin))
  {
    ReefAngel.Relay.Off(Port1);
    ReefAngel.Relay.Off(Port2);
    ReefAngel.Relay.Off(Box1_Port3);
    ReefAngel.Relay.Off(Box1_Port4);
  }
  ReefAngel.ShowInterface();
}

Code: Select all

digitalWrite(highATOPin,LOW);

Code: Select all

#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>

#define Daylight            1
#define AutoTopOff          2
#define Heater              3
#define Return              4
#define WavemakerL          5
#define WavemakerR          6
#define LEDs                7
#define Refugium            8
#define AlkDoser            13
#define CaDoser             14
#define AclHeater           17
#define GFO                 18 

void setup()
{
   randomSeed(analogRead(0)); //wm stuff 
    ReefAngel.Init();  //Initialize controller   
    ReefAngel.FeedingModePorts = B00111000;
//    ReefAngel.WaterChangePorts = B00000000;
//    ReefAngel.OverheatShutoffPorts = B00000101;
//    ReefAngel.LightsOnPorts = B00000001;
    // Ports that are always on
    ReefAngel.Relay.On(Return);
    ReefAngel.Relay.On(GFO);
//WaveMaker stuff
    ReefAngel.Timer[1].SetInterval(random(15,35));
    ReefAngel.Timer[1].Start(); 
    ReefAngel.Relay.On(WavemakerL);
}

void loop()
{
    ReefAngel.ShowInterface();
    
//    ReefAngel.StandardFan(Chiller,775,783); Removed for ATO function
//    ReefAngel.StandardHeater(Heater,785,79); 
    ReefAngel.StandardLights(Daylight,10,0,21,00);  //Daylight schedule 10:00am - 9:00pm
    ReefAngel.StandardLights(Refugium,21,0,10,0);  //Refugium schedule 9:00pm - 10:00am
    ReefAngel.StandardLights(LEDs,9,00,22,00);  //LED schedule 9:00am - 10:00pm
    ATOFailSafe(AutoTopOff); //ATO Stuff  
//Heater Temp Settings
// Turn on Heaters when the temp < 78.8 degrees
          if ( ReefAngel.Params.Temp1 < 788 ) ReefAngel.Relay.DelayedOn(Heater, 1);
          // Turn off Heaters when the temp > 78.6 degrees
          if ( ReefAngel.Params.Temp1 >= 791 ) ReefAngel.Relay.Off(Heater);
//Acclimation Heater Temp 2 settings
       // Turn on AclHeater when the temp < 78.8 degrees
          if ( ReefAngel.Params.Temp2 < 788 ) ReefAngel.Relay.DelayedOn(AclHeater, 1);
          // Turn off AclHeater when the temp > 79.1 degrees
          if ( ReefAngel.Params.Temp2 >= 791 ) ReefAngel.Relay.Off(AclHeater);
//Wavemaker
    if ( ReefAngel.Timer[1].IsTriggered() )
      {
        ReefAngel.Timer[1].SetInterval(random(15,30));
        ReefAngel.Timer[1].Start();
        ReefAngel.Relay.Toggle(WavemakerL); //port 5
        ReefAngel.Relay.Toggle(WavemakerR); //port 6
       }
//Dose Ca
                   if ( ReefAngel.DisplayedMenu == DEFAULT_MENU ) //Ca Doser - Only works if Main screen is showing
              {
               /* && = and || = or
               Hours between 12am and 8am
               minute must be 0 (top of the hour)
               seconds less than 2 (up to 2 seconds)
               */
               if ( ((hour() >= 0) && (hour() <= 8)) && (minute() == 0) && //dose time
                   (second() < 2) ) //dose duration
               {
                  ReefAngel.Relay.On(CaDoser);
               }
               else
               {
                  ReefAngel.Relay.Off(CaDoser);
               }
            }
  
//Dose Alk
                   if ( ReefAngel.DisplayedMenu == DEFAULT_MENU ) //Alk Doser - Only works if Main screen is showing
              {
               /* && = and || = or
               Hours between 12:05am and 8:05am
               minute must be 0 (top of the hour)
               seconds less than 2 (up to 2 seconds)
               */ 
               if ( ((hour() >= 0) && (hour() <= 8)) && (minute() == 5) && //dose time
                   (second() < 2) ) //dose duration
               {
                  ReefAngel.Relay.On(AlkDoser);
               }
               else
               {
                  ReefAngel.Relay.Off(AlkDoser);
               }
            }  
}

void ATOFailSafe(byte ATO) //changed port to fATO
{
   // Check for the low switch
   /*
   If the Low switch is active, meaning the float is opposite the end with the two wires,
        we are empty so we should turn on the pump.  Otherwise, we are full, so turn off the port.
   */
   if ( ReefAngel.LowATO.IsActive() )
   {
      ReefAngel.LowATO.StartTopping();
      ReefAngel.Relay.On(ATO);
   }
   else
   {
      ReefAngel.LowATO.StopTopping();
      ReefAngel.Relay.Off(ATO);
   }
}