Reef Angel Forum

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port4Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port5Bit | Port6Bit | Port7Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = 0;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;


    // Ports that are always on
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port5 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.ActinicLights( Port1 );
    ReefAngel.DayLights( Port2 );
    ReefAngel.StandardLights(Port3,18,0,8,0); // Lights on at 6:00pm and off at 8:00am
    ReefAngel.Relay.DelayedOn( Port6 );
    ReefAngel.DosingPumpRepeat1( Port7 );
//    ReefAngel.DosingPumpRepeat2( Port8 );

    ////// Place your custom code below here

    ReefAngel.RF.UseMemory=true;
    
    
    if (ReefAngel. Params. PH < 850)  
      ReefAngel.DosingPumpRepeat(Port8,5,60,2);
    else
      ReefAngel.Relay.Off(Port8);


    //Moonlight Phase 6pm-8am (CH3= Daylight CH4=Actinic)
    if ( (hour() >=8) && (hour() <18) )
    ReefAngel.PWM.SetActinic( (0) );
    else
    ReefAngel.PWM.SetActinic( MoonPhase() );


    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "waucedah_joe","xxxxxxx" );
    ReefAngel.ShowInterface();
}

Code: Select all

ReefAngel.DosingPumpRepeat(Port8,5,60,2);
if (ReefAngel.Params.PH > 850)  
  ReefAngel.Relay.Off(Port8);

Code: Select all

ReefAngel.DosingPumpRepeat(Port7,0,60,2);
ReefAngel.DosingPumpRepeat(Port8,5,60,2);