My wifi module has not worked since sometime last year. I have been too busy to sit down and work on it since it stopped working.
I am trying to update my firmware, but I can never get past downloading the firmware image. I have looked through several dozen threads trying to find out what is going wrong. But I am not finding anything. I thought that maybe I needed to update the wifi management program, but whenever I try to follow a link to download a new one I am redirected to another page.
Here is the error that I am getting:
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
< <4.41>
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 79680 3 WiFly_GSX-2.36
< 22 1052 10 config
< 23 944 10 user
< 24 88548 3 wifly-GSX-441-r1057
< 34 83648 3 WiFly_GSX-2.45
< 78 86328 3 wifly-GSX-400
< 79 46632 3 wps_app-GSX-131
< 80 66240 3 eap_app-GSX-101
< 81 74920 3 web_app-GSX-106
< 82 37282 0 web_config.html
< 83 512 0 link.html
< 84 7268 0 logo.png
<
< 104 Free, Boot=24, Backup=78
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dirty$Dozen
< set w s Dirty$Dozen
< AOK
< <4.41>
> set w p Mustard1&Relish2
< set w p Mustard1&Relish2
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 79680 3 WiFly_GSX-2.36
< 22 1052 10 config
< 23 944 10 user
< 24 88548 3 wifly-GSX-441-r1057
> load user
< 34 83648 3 WiFly_GSX-2.45
< 78 86328 3 wifly-GSX-400
< 79 46632 3 wps_app-GSX-131
< 80 66240 3 eap_app-GSX-101
< 81 74920 3 web_app-GSX-106
< 82 37282 0 web_config.html
< 83 512 0 link.html
< 84 7268 0 logo.png
<
< 104 Free, Boot=24, Backup=78
< <4.41>
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dirty$Dozen
< set w s Dirty$Dozen
< AOK
< <4.41>
> set w p Mustard1
< set w p Mustard1
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 79680 3 WiFly_GSX-2.36
< 22 1052 10 config
< 23 944 10 user
< 24 88548 3 wifly-GSX-441-r1057
< 34 83648 3 WiFly_GSX-2.45
< 78 86328 3 wifly-GSX-400
< 79 46632 3 wps_app-GSX-131
< 80 66240 3 eap_app-GSX-101
< 81 74920 3 web_app-GSX-106
< 82 37282 0 web_config.html
< 83 512 0 link.html
< 84 7268 0 logo.png
<
< 104 Free, Boot=24, Backup=78
< <4.41>
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dirty$Dozen
< set w s Dirty$Dozen
< AOK
< <4.41>
> set w p Relish2
< set w p Relish2
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ftp u
< ftp u
< <4.41>
< FTP connecting to 0.0.0.0
< FTP timeout=2
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
< ftp u
> ftp u
< <4.41>
< FTP connecting to 0.0.0.0
< FTP timeout=2
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 79680 3 WiFly_GSX-2.36
< 22 1052 10 config
< 23 944 10 user
< 24 88548 3 wifly-GSX-441-r1057
< 34 83648 3 WiFly_GSX-2.45
< 78 86328 3 wifly-GSX-400
< 79 46632 3 wps_app-GSX-131
< 80 66240 3 eap_app-GSX-101
< 81 74920 3 web_app-GSX-106
> load user
< 82 37282 0 web_config.html
< 83 512 0 link.html
< 84 7268 0 logo.png
<
< 104 Free, Boot=24, Backup=78
< <4.41>
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s DirtyDozen
< set w s DirtyDozen
< AOK
< <4.41>
> set w p Mustard1
< set w p Mustard1
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
< reboot
> reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ftp u
< ftp u
< <4.41>
< FTP connecting to 0.0.0.0
Opening Serial Port...
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Opening Serial Port...
Verifying speed at 9600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ftp u
< ftp u
< <4.41>
< FTP connecting to 0.0.0.0
< FTP timeout=2
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM6
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM6
Connected to serial port COM6
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM6
---------------------------------------------------------------------
Wifi Attachment Connected to COM6
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM6
> $$$
< CMD
> ftp u
< ftp u
< <4.41>
< FTP connecting to 0.0.0.0
< FTP timeout=2
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.
Removing connection to COM6
Cannot Update Wifi Firmware
Re: Cannot Update Wifi Firmware
You are already in the latest firmware, which is 4.41
Please follow this thread to reconfigure it: http://forum.reefangel.com/viewtopic.php?f=3&t=4601
Please follow this thread to reconfigure it: http://forum.reefangel.com/viewtopic.php?f=3&t=4601
Roberto.
Re: Cannot Update Wifi Firmware
I followed the thread step-by-step and I couldn't get the wifi to work. I still have fast blinking blue lights and a slow green light. Did I miss a step?
Re: Cannot Update Wifi Firmware
x=0
while x<>121
messagebox 'Start WiFly module configuration' 'Webscan Config Program'
;this macro all sent with 5 msec character delay
timeout=10
send '$$$'
wait 'CMD'
sendln 'factory RESET'
wait 'Set Factory Defaults'
sendln 'reboot'
wait '*READY*'
;----------------------------------------
; Begin user settings
send '$$$'
wait 'CMD'
sendln 'set ftp address 198.175.253.161'
wait'AOK'
sendln 'save'
wait 'config'
sendln 'set wlan ssid DirtyDozen '
wait 'AOK'
sendln 'set wlan pass **************** '
wait 'AOK'
sendln 'set option deviceid ReefAngelWifi'
wait 'AOK'
sendln 'set w j 1'
wait 'AOK'
sendln 'set c c 0'
wait 'AOK'
sendln 'set c r 0'
wait 'AOK'
sendln 'set c o 0'
wait 'AOK'
sendln 'set i d 1'
wait 'AOK'
sendln 'set c i 3'
wait 'AOK'
sendln 'set dns name http://www.reefangel.com'
wait 'AOK'
sendln 'set i h 198.171.134.6'
wait 'AOK'
sendln 'set i r 80'
wait 'AOK'
sendln 'set i f 0x06'
wait 'AOK'
sendln 'set s t 0x10'
wait 'AOK'
sendln 'set u m 2'
wait 'AOK'
sendln 'set i p 2'
wait 'AOK'
sendln 'set u b 57600'
wait 'AOK'
sendln 'set s p 0'
wait 'AOK'
sendln 'set c s 1420'
wait 'AOK'
sendln 'save'
wait 'config'
sendln 'save user'
wait 'user'
;inputbox 'Configure another module (y/n)' 'WiFly Config Program'
; convert inputstr to ASCII int value
; str2code x inputstr
endwhile
while x<>121
messagebox 'Start WiFly module configuration' 'Webscan Config Program'
;this macro all sent with 5 msec character delay
timeout=10
send '$$$'
wait 'CMD'
sendln 'factory RESET'
wait 'Set Factory Defaults'
sendln 'reboot'
wait '*READY*'
;----------------------------------------
; Begin user settings
send '$$$'
wait 'CMD'
sendln 'set ftp address 198.175.253.161'
wait'AOK'
sendln 'save'
wait 'config'
sendln 'set wlan ssid DirtyDozen '
wait 'AOK'
sendln 'set wlan pass **************** '
wait 'AOK'
sendln 'set option deviceid ReefAngelWifi'
wait 'AOK'
sendln 'set w j 1'
wait 'AOK'
sendln 'set c c 0'
wait 'AOK'
sendln 'set c r 0'
wait 'AOK'
sendln 'set c o 0'
wait 'AOK'
sendln 'set i d 1'
wait 'AOK'
sendln 'set c i 3'
wait 'AOK'
sendln 'set dns name http://www.reefangel.com'
wait 'AOK'
sendln 'set i h 198.171.134.6'
wait 'AOK'
sendln 'set i r 80'
wait 'AOK'
sendln 'set i f 0x06'
wait 'AOK'
sendln 'set s t 0x10'
wait 'AOK'
sendln 'set u m 2'
wait 'AOK'
sendln 'set i p 2'
wait 'AOK'
sendln 'set u b 57600'
wait 'AOK'
sendln 'set s p 0'
wait 'AOK'
sendln 'set c s 1420'
wait 'AOK'
sendln 'save'
wait 'config'
sendln 'save user'
wait 'user'
;inputbox 'Configure another module (y/n)' 'WiFly Config Program'
; convert inputstr to ASCII int value
; str2code x inputstr
endwhile
Re: Cannot Update Wifi Firmware
I took out the accidental spaces, and I still have the same results with the lights.
CMD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid DirtyDozen
AOK
<4.41> set wlan pass **************
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 198.171.134.6
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
CMD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid DirtyDozen
AOK
<4.41> set wlan pass **************
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 198.171.134.6
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
Re: Cannot Update Wifi Firmware
I wonder if the & in the passphrase is messing with it. Did you try alphanumeric passphrase?
Roberto.
Re: Cannot Update Wifi Firmware
I'll try it right now without but the adapter used to work with the same passphrase
Re: Cannot Update Wifi Firmware
Changed it to only alphanumeric and the problem remains