Reef Angel Forum

Posted: **Mon Aug 25, 2014 1:54 pm**

Relay #3 is stuck in the ON position.
I rebooted the board and unplugged/plugged the system. LCD screen shows relay as if it was off. However, anything that plugs into it, powers on. I have it as a doser powering an Toms aqua lifter pump.
It only turns on for one minute a day. Yesterday, it started on time and it never stopped...
Any ideas or suggestions are welcome.

Thanks

Posted: **Mon Aug 25, 2014 2:58 pm**

Is the port still on if you unplug the svga and leave just the relay box powered on?

Posted: **Mon Aug 25, 2014 3:45 pm**

Yes, when svga is unplugged, the relay remains ON as do the pwm dimmers...

Posted: **Mon Aug 25, 2014 5:29 pm**

That seems like the relay went bad somehow.
You will need to send back for repair.
PM for details.

Posted: **Sat Oct 17, 2015 3:49 am**

Hi I am having the same issue. Where can I have my relay box repaired in South Africa?

Posted: **Sat Oct 17, 2015 12:20 pm**

You can replace it yourself if you are good with soldering or send it back to us.

Reef Angel Forum

Relay #3 is stuck in the ON position.

Relay #3 is stuck in the ON position.

Re: Relay #3 is stuck in the ON position.

Re: Relay #3 is stuck in the ON position.

Re: Relay #3 is stuck in the ON position.

Re: Relay #3 is stuck in the ON position.

Re: Relay #3 is stuck in the ON position.