Reef Angel Forum

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>
#include <WiFiAlert.h>

////// Place global variable code below here
void emergencyLeak(char *message);
////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    InternalMemory.LCDID_write(255); //Old LCD
    //ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    ReefAngel.SetTemperatureUnit( Celsius );  // set to Celsius Temperature
    ReefAngel.AddSalinityExpansion();  // Salinity Expansion Module
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port3Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port2Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit;
    // Ports turned off when Leak is detected
    ReefAngel.LeakShutoffPorts = Port4Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 280 );


    // Ports that are always on
    ReefAngel.Relay.On( Port3 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port5 );
    ReefAngel.Relay.On( Port6 );
    ReefAngel.Relay.On( Port7 );
    ReefAngel.Relay.On( Port8 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardHeater( Port1,245,761 );
    ReefAngel.StandardFan( Port2,771,255 );
    ////// Place your custom code below here
    
    if (ReefAngel.IsLeakDetected())
    {
      emergencyLeak("Leak");
    } 
    
    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "rsalomez", "xxxxxxx" );
    ReefAngel.ShowInterface();
}

void emergencyLeak(char *message){

  static WiFiAlert t;
  t.SetDelay(0);
  t.Send(message);

  DISPLAYLOG=true;
  LOGMESSAGE = message;
}

Code: Select all

Temperature 1 >= 28
Water Leak Flag = 1